Thirupattur District Renovation of RCC Roof Anganwadi Building at Abigiripattarai in Arangaldurgam Panchayat at Madhanur Block Under SFC(DP)-2026-27

Renovation of RCC Roof Anganwadi Building at Abigiripattarai in Arangaldurgam Panchayat

Towards Dismantling of Pressed tiles & weathering course including all cost and conveyance of men and materials etc/. All complete

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Distempering the old walls and ceiling two coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer

Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Painting old iron work with one coat of best synthetic enamel paint of approved quality, colour including ordinary scrapping and preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer.

Painting two coats with approved Black Oxide for Old Black board the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer.

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulate SC Unsheathed Cu conductor of 1100v grade in suitable PVC rigit pipe on wall and ceiling with PVC Accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light Fan Point for Elctronic regulator ) (5 Point per coil) SD 36 Plug Point

Towards cost and supply of Tube light Fittings with light including cost and convayance tosite and labour charges etc, complete.(SD-88)