15th CFC-Providing Borewell at Chitha Hospital in Ward no 18

Geophysical survey charges

Drilling of bore well 150mm dia in any kind of soil or hard rock for a requiring depth using rig heavy duty compressorr equipment mounted on a vehicle including conveyance of all items to site Fuel cost, labour charges and with one supporting vehicle complete etc.

Supply and fixing of 180 mm dia PVC casing pipe

Labour charges for inserting PVC casing pipes assembly in the drilled hole including jointing pipe etc. competed as directed by the Departmental officer

Plastering with cement mortar 1:5 (One cement five sand) 12 mm thick including finishing the surface cost and conveyance of all materials mixing curing and all other incidental charges etc., complete complying with standard specification

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supply and delivery of following GI pipe and specials

Kitty set

Bore cover

32 Amps Fuse carrier

Main switch

32 mm GI pipe

PVC Tank (Supply and delivery and fixing of PVC as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

25 mm GI Tee

25 mm tank nipple

2 HP Submersible Panel board (THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START) TWAd 21-22 Table No 11.1 Pg.No 110

Run off 4 x 4 sq m. cable (Supply and run of 4 of 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains ) (Electric data 21-22 SD 72)

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supply and fixing of 2 HP compressor with motar ISI standard specification including cost of materials and fixing charges etc.,

25 mm GI pipe

32 mm dia GI pipe

32 mm HDPE hose pipe

4 x 4 sq mm flat cable

32 mm dia GI elbow

32 mm dia GI union

32 mm brass valve

25 mm GI pipe

25 mm GI elbow

25 x 20 mm GI elbow

20 mm brass valve

20 mm hex nipple

32 mm hex nipple

Nylon rope

25 mm HDPE hose

25 mm dia gate valve

32 mm dia gate valve

Please Enable Macros to View BoQ information