REPAIR TO APPROACH PATH AND DRAINS IN SEC B AT MIL STN PATIALA UNDER GE (SOUTH) PATIALA

Amount

Demolition of Brick work including all quoains and arches, pillars etc built in cement mortar complete all as specified and directed.

M&L Brick work using sub class B old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6 m mean radius complete all as specified and directed by Engineer-in-Charge.

M&L Brick work using sub class B old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6 m mean radius (Except bricks) complete all as specified and directed by Engineer-in-Charge.

M&L Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 as in drains including nescessary filling & jointing with cement mortar as work proceeds on other side of drain complete all as specified and directed by Engineer-in-Charge.

Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 as in drains (Except Bricks) including nescessary filling & jointing with cement mortar as wrk proceeds on other side of drain Complete all as specified and directed by Engineer-in-Charge

M&L for Flush pointing to brick work as in drains etc., in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for Cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in copings, kerbs, bed plates etc., with slightly rounded or chamferred angles & throating complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15mm thick cement plaster in CM 1:4 on brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing new or previously untreated plastered surfaces and M&L for priming with alkali resistant priming paint and applying two coats of cement base paint on new plastered surfaces of walls etc. complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in surface channels & drain complete all as specified and directed by Engineer-in-Charge.

M&L for Extra for forming fair finish to drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds/mitred stopped ends etc. complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick Cement concrete 1:4:8 type D-2 using 40 mm stone aggregate as in foundations, fillings and mass concrete or sub base under floors complete all as specified and directed by Engineer-in-Charge.

M&L for Providing and Laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in foothpath ,parks,lawns,drive ways,or light trafic parking etc,shape made by table vibratory method using PU mould ,laid in req. colour &pattern over and incl. 50mm thick compacted bd of fine sand,compacting and proper embedding/laying of interlocking paver blocks into sand bedding layer through vibratory compaction by using plate vibrator ,filling the joints with sand &cutting of paver blocks as per req. size and pattern ,finishing and sweeping extra sand complete all as specified and directed by Engineer-in-Charge.

M&L for 10mm coloured paver tiles (endeura Tiles) of size 300 x 300mm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for Cement concrete 50mm thick 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in floors pavings etc finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete as in bed of drains complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of OLD/new Kerb stone surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exc. 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated spoil to a distance not exceeding 50 metre and deposting where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced concrete pipes of 300 mmdia, class NP2, laid and jointed complete with collars and jointed complete in cement mortar (1:1) complete all as specified and directed by Engr-in-charge.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 300 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in precast slabs for covers of manholes and set in CM 1:6 including necessary form work after demolition of old RCC and placing of manholes cover in version complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 8 mm dia cut to length bent to shape required including cranking bending spirally hooking ends and binding with mild steel wire not less than 0.9mm dia (annealed) complete all as specified and directed by Engr-in-Charge.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding witgh and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Material and Labour for providing factory made Precast Cement Concrete kerb stone, 1:2:4 type B1 (using 20mm graded aggregate) with plain fair faces, including chamfers, weatherings, throating etc. and set in CM 1:4 complete all as specified and directed by Engineer-in-Charge. Note- (i) The minimum size of Kerb stone shall be 300mmx300mmx100mm and shall be embedded in the ground average 10cm deep. The quoted rates includes embedding kerb stone and temping ground around kerb stone and removal of surplus soil, etc.

08AASFJ0437G1Z8

M/S Mukesh Kumar Gupta

Arneja Builders

ANIL KUMAR AND CO

M/S RAJ KUMAR GUPTA

AR CONSTRUCTIONS

m/s panchmukhi builders

RUPINDER SINGH SODHI