Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.9 LAccepted-AOC D 154 ADARSH NAGAR JABALPUR MP 482001 | JABALPUR | MADHYA PRADESH | 482001 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹39.3 L+₹61,640 (1.59%)Rejected-Finance 292 GROUND FLOOR D BLOCK SAI DHAM RAJ CITY LONI BANTHLA GHAZIABAD GHAZIABAD UTTAR PRADESH 201102 | GHAZIABAD | UTTAR PRADESH | 201102 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹42.2 L+₹3.6 L (9.26%)Rejected-Finance HOUSE NO 25 CANTT BOARD WARD SADAR BAZAR CANTT JABALPUR MP 482001 | JABALPUR | MADHYA PRADESH | 482001 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹68.3 L+₹29.6 L (76.7%)Rejected-Finance 2284 30 BAJRANG NAGAR VFJ ESTATE JABALPUR 482009 | JABALPUR | MADHYA PRADESH | 482009 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
3 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JABALPUR
HQ CWE JABALPUR OPPOSITE SUPPLY DEPOT SADAR 482001
B AND R MAINTENANCE WORKS OF LEKHA NAGAR JABALPUR UNDER GE (EAST) JABALPUR
2023_MES_631751_1
82655/E8
Open Tender
Civil Works
Item Rate
180 days
JABALPUR
AS PER NIT
7 documents required · 7 mandatory
₹500
Yes
GE EAST JABALPUR
₹1 L
Yes
9 Feb 2024
8 Dec 2023
5 Jan 2024
8 Dec 2023
3 Jan 2024
22 Dec 2023
8 Dec 2023 - 21 Dec 2023
Amount
Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.
Dismantling stone slab and tiles of any description or thickness, laid bedded and pointed in any mortar, in floors etc complete all as specified and as directed.
Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.
M&L for PCC (1:7:12) Type F-2 using 40 mm graded crushed stone aggregate as in filling in sunken floor and the like complete all as specified & directed.
M&L for hard core of broken stone or boulder of gauge not exc 63mm deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to true surface complete all as specified and as directed.
M&L for 25mm thick PCC (1:2:4) Type B-0 using 12.50 mm graded crushed stone aggregate as in levelling course for laying kota stone in floor, surface finished even & fair without using extra cement complete all as specified and directed.
M&L for 100 mm thick cement concrete (1:4:8) Type D-2, using 40mm graded crushed stone aggregate as in sub-base complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) Type C-1 using 20 mm graded crushed stone aggregate as in plinth protection, surface finished even & fair without using extra cement complete all as specified and directed.
Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.
M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan to any radius built in cement mortar (1:4) as in half brick thick walls complete all as specified and as directed.
Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F, in repair, Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.
Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.
Taking down shutters of any description, exc 1.00 sqm but not exc 2.00 sqm each complete all as specified and as directed.
M&L for IInd class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.
M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed. Note:- Butt hinge will be measured and paid for separately as "Supply only".
M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately as "Supply only".
Supply & fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F 125mm long extruded aluminum alloy handles, fabricated type anodised fixed with screws complete all as specified and as directed.
S&F 140mm floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.
S&F continuous (piano) hinges, mild steel bright finish or electro galvanised width of flaps (when open) n.exc. 30mm complete all as specified and directed.
S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.
M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.5 sqm in each pane complete all as specified and as directed.
M&L 3mm thick sheet glass, frosted, on one side and glazing with oil putty in square n exc. 0.5 sqm in each pane complete all as specified and as directed.
Supply and fix 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.
Supply and fix 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.
Supply & fix 300mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.
Supplying & fixing 300mm size ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified & directed.
M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site complete all as specified and as directed
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges, steel peg stay etc complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe- 290 ( Gde-E-165) complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts). No claim whatso ever shall be entertained by Govt on this account.
M&L for scratch free light shade vitrified floor tiles, minimum 10mm thick (square/ rectangular) area of each tile not exc 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified & directed.
Material and labour for light shade vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles n exc 0.36 sqm,on verical surfaces as in skirting or dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 10mm thick cement plaster in cement mortar 1:4 complete all as specified and as directed.
M&L for machine cut cudappah stone slab as in cooking platform/ shelf , 20-25mm thick over & including 15mm thick cement screed bed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified & directed.
M&L for machine cut kota stone slab as in flooring, 18-20mm thick over & including 15mm thick cement screed bed in CM (1:6) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.
M&L for machine cut kota stone slab as in skirting/ vertical surface, 15-18mm thick over & including 10mm thick rendering in CM (1:4) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.
Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.
M&L for 15mm thick rendering in CM 1:6 on internal surfaces of wall, finished even and smooth without using extra cement complete all as specified & directed.
M&L for 5mm thick rendering in CM 1:3 as on ceiling, soffit of RCC shelves, surfaces finished even and smooth without using extra cement complete all as specified & directed.
M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof, surface finished even and smooth without using extra cement complete all as specified & directed.
M&L 10 mm thick rendering in CM (1:3) on concrete surfaces, surface finished even and smooth without using extra cement complete all as specified & directed.
M&L for applying two coats of cementious & acrylic flexible waterproofing and protective coating as per Manufacturer's instructions and finally applying cement slurry as a protective layer complete all as specified and as directed. (Make: Pidifin 2K of Dr Fixit or equivallent Make as approved by GE).
Dismantling boarding, any description, fixed in any position with nails as in cupboards, false ceiling or wall panelling etc complete all as specified and as directed.
M&L for 12mm thick veneered decorative plywood, grade I (with BWR resin) with decorative face veneers on one face; fixed with screws to timber framework complete all as specified and as directed.
M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for peparation of old plastered decorated surfaces of ceiling and applying one coat of whitewash complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying three coats of whitewash complete all as specified and as directed.
M&L for peparation of old plastered decorated surfaces of walls and applying one coat of whitewash complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over and including 1mm thick wall care putty complete all as specified and as directed.
M&L for complete removal of existing treatment from walls and applying two coats of distemper oil emulsion over and including 1mm thick wall care putty complete all as specified and as directed.
M&L for complete removal of existing treatment from old decorated plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC lessthan 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resitance exterior paint of required shade (Company depot, tinted) with silicon additive @ 1.43 litre/10 Sqm over and incl priming coat of exterior primer applied @ 0.90 litre/10 Sqm over and including 1mm thick wall care putty complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resitance exterior paint of required shade (Company depot, tinted) with silicon additive @ 1.43 litre/10 Sqm over and incl priming coat of exterior primer applied @ 0.90 litre/10 Sqm over and including 1mm thick wall care putty complete all as specified and as directed.
M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat synthetic enamel paint of colour as approved by GE over and including a coat of pink primer complete all as specified & directed.
M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer as approved by GE complete all as specified & directed.
M&L for preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.
M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.
Material and labour for resecuring or easing and adjusting shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm without taking down shutters complete all as specified and as directed .
Material and labour for resecuring or easing and adjusting shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm including taking down the shutters and refixing in the same opening complete all as specified and as directed .
M&L for machine pressed precast concrete interlocking paver block, any shape and size, conforming to IS 15658-2006 of 80mm thickness, M-40 grade of concrete, laid over and including 50mm thick sand cushioning complete all as specified and as directed.
M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing complete over and including screed bed 15 mm thick in CM (1 :4) complete all as specified and directed.
M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:4) complete all as specified & directed.
M&L for glazed ceramic coloured tiles in vertical surfaces 350X250X7 or 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white cement to match oer and including 10mm thick cement plaster in cement mortar 1:4 complete all as specified and as directed.
M&L for 8-10mm thick ceramic parking tiles 300X300mm thick, laid over and including 15mm thick cement plaster in cement mortar (1:4), and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of the tile complete all as specified and directed.
Dismantling of water tank of any description of capacity exc. 500 litres but not exc. 1000 litres, removing to store or from the site complete all as specified and as directed.
Supply and fix 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. Make:- Sintex or Tuff or JS Poly Plast or Dhara as approved by GE.
Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 15mm bore of pipe complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 20mm bore of pipe complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 25mm bore of pipe complete all as specified and as directed.
Supply & fix 15mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.
Supply & fix 20mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.
Supply & fix 25 mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.
Supply & fix 32 mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.
Supply & fix in repairs, 20mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply & fix in repairs, 25mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F, in repair, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long Complete all as specified and directed.
S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
Supply and fixing, in repair, waste fittings, brass chromium plated for glazed ware sinks, basins, urinals etc with long screw shank and fly nuts, flange end bedded in red lead cement and other fixed complete all as specified and as directed.
Supply and fixing in repair 32mm bore Low Density Poly ethylene pipes (LDPE), 1.0 mtr long of pressure rating 6Kgf/Sqcm fixed to wash hand basin complete all as specified and as directed.
Material and labour for making holes in RCC beam to fix 32mm dia GI pipe spout in sunken floor and making good the damaged beam with PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate complete all as specified and as directed.
S&F in repair 15mm bore pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly-nuts, screwed for iron pipes, complete all as specified & directed.
S&F in repairs 15mm bore Bib tap, cast copper alloy, fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repairs 15mm bore, angle cock /stop valve, fancy type, chromium plated,cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule complete all as specified.
S&F, in repair, 15mm bore stop cock, fancy type, chromium plated,cast copper alloy long shank (Concealed type) screwed down high pressure, with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule complete all as specified and as directed.
Supply and fixing in repair 125mm size brass chromium plated shower rose with arm with or without swivel joints, any size including fixing to steel pipes or union complete all as specified and as directed.
S&F, in repair, grating doom 100mm dia of PTMT(Minimum weight 25 gm) complete all as specified and as directed.
S&F 19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face and other side commercial type with and including 6mm thick 1st class HardWood lipping over all edges, fixed with GI nails etc complete all as specified and as directed.
Supply and fixing GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and wed of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section(not less than 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel at 457mm centre to centre including hangers of 6mm dia GI (uptpo 1200mm length) adjusting level fixed to roof slab or purlins by means of cleats made out of GI flats 40X3mm size 60mm long and expansiion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.
providing and fixing Gypsum board 12mm thick in ceiling fixed with screws as per manufacturer's instruction including finishing all gaps with plaster of paris and bonding tape etc complete all as specified and as directed.
M&L for preparation of new surfaces of ceiling and applying two coats of distemper oil emulsion over one coat of primer complete all as specified and as directed.
M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall with rawl plug and screws to make PVC frame as per specification and drawings completeall as directed.
M&L for 5mm thick prelaminated PVC sheet in strip and channel, feathered at the edges for fixing in wall lining, partition etc including solvent cement etc and fixing at site omplete all as specified and as directed.
Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landing, steps, cill, sunshades, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm in girth in brick wall/stone masonry wall etc complete all as specified and as directed.
Supply & fix, in repair, vitreous china white WHB (550 x 400 mm) flat back with CP waste coupling, waste pipe, brackets including cutting for and pinning in ends of brackets complete all as specified and directed.
Supply & fix kitchen sink with drainage board made of stainless steel 1.0mm thick with plug, washers with and including 32 mm dia PVC rigid waste pipes and C.P coupling including fixing cantilever brackets of suitable shape & size as required at site and connecting unions to pipe, overall size 915 mm x 460mm, bowl size 410 mm x 330 mm x 160mm and necessary cutting to slab complete all as specified & directed.
S&F, in repair, stainless steel kitchen plate rack moulded finish, weight not less than 8.7 Kg of size 910X760X250mm, and to be fixed on wall with rawl plug and brass screws complete all as soceified and as directed.
S&F, in repair, 15mm size PVC connection pipe with PTMT nuts of length 600 mm complete all as specified and as directed.
Supply & fix, in repairs, vitreous china squatting pan, Orissa pattern of size 580x440 mm white, with integral foot rest and PVC 'P' or 'S' trap including connection to trap, and to flush pipe, etc (excluding flushing pipe) and making good to floor complete all as specified & directed.
Supply and fix, in repair, 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed.
Supply and fix in repair 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed & directed.
Supply and fix in repair 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with & including necessary clamps of requird size etc complete all as specifed & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.
M&L for 75mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, fixed in cement concrete type B-1, 1:2:4 using 20mm graded crushed stone aggregate complete all as specified and directed.
Supply and fix 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed & directed.
Supply and fix 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with and including necessary clamps of required size etc complete all as specifed & directed.
Supply and fix 110mm bore PVC (SWR) bends of any radius , diminishing pieces or tapers (larger bore measured) , complete all as specified & directed.
Supply and fix 75mm bore PVC (SWR) bends of any radius, diminishing pieces or tapers (larger bore measured) complete all as specified & directed.
S&F, in repair, stack clamp for 75mm dia pipe made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
S&F, in repair, stack clamp for 110mm dia pipe, made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
Schedule of credit amount of Rs 74,388.50 to be deducted during AOC
Goodluck Enterprises
Arpit dixit construction
SHRI KRISHNA CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .