Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.3 LAccepted-AOC | 1 | Accepted-AOC Lowest | |
| 2 | 2₹21.7 L+₹7.4 L (51.8%)Rejected-AOC | 2 | Rejected-AOC 2 | |
| 3 | 3₹22.4 L+₹8.2 L (57.3%)Rejected-AOC | 3 | Rejected-AOC 3 | |
| 4 | 4₹24.4 L+₹10.2 L (71.4%)Rejected-AOC FLAT NO 330 PKT 1 SECTOR 1 DWARKA NEW DELHI 110 075 | NEW DELHI | NEW DELHI | DELHI | 110075 | 4 | Rejected-AOC 4 | |
| 5 | 5₹25.4 L+₹11.2 L (78.3%)Rejected-AOC 24 824 GOVERDHAN COLONY MAIN BHIND ROAD GOLE KA MANDIR | 5 | Rejected-AOC 5 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
31 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
PERIODICAL SERVICES BY USING SMART PERIODICAL METHODOLOGY TO CERTAIN BLDGS AT DOMESTIC AREA VAYUSENABAD, AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD
2023_MES_591990_1
GE/TKD-07/2023-24
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
9 documents required · 9 mandatory
₹500
GE AF TUGHLAKABAD
₹50,000
Yes
12 Oct 2023
28 Apr 2023
1 Jun 2023
5 May 2023
31 May 2023
13 May 2023
Amount
Complete removing of existing treatment by scrapping with Asian Paints TriCare Wal Sander L-01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"19" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed by Engr-in-Charge.
M&L for acrylic polymer-modified cementitious high performance coating two component) with high solid content and can be used for both side waterproofing due to its excellent bonding, good waterproofing and unmatched resistance to hydrostatic pressure which resist up to 5 bars of positive hydrostatic pressure and form Highly elastic film which provides elongation up to 100 as per manufacturer instructions complete all as specified and directed by Engr-in-Charge.
M&L for single component polymer modified mortar Smart Care Repair Mortar with compressive strength of 38 MPA at 28 days (ASTM C 109 99) and tefs le strength of 2.5 Mpa (ASTM C 307) up to 25mm in a single coat and max thickness of 50mm @ 53 kg for 25mm thickness per Sqm as per manufacturer instructions complete all as specified and directed by Engr-in-Charge.
M&L waterproof cement based putty @ 1 Kg undiluted) per sq mtr. of average thickness fm, of Asian Paints or its equivalent over the plastered old painted wat after scrapping to prepare the surface even and smooth complete and Sanding of the putty surface with Asian Paints TruCare Wall Sander L 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sanding oad of 240 Grit or above having dia of 779" to make the surface free from dust etc by skilled labour complete all as specified and directed by Engr-in-Charge. Note: Step 1) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2)Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Parts Trucare Graco Spray Machine(Mode EH 1230 Dt) or equivalent having a DC electric motor of 3.3 KW having flow speed of max 6 ltr per minutes with a maximum pressure 230 bar having maximum tip size 0.041. Step 3) Allow 6-8 hrs time to dry the putty Surface
M&L For applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed by Engr-in-Charge. Note-Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer
M&L for two coats of smooth acrylic emulsion with rich matt finish having voc less than 50 grams per tr complying leed criteria @1 trs (unndiluted)/10 sq mtrs diluted with water 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent having an electric motor of min HP with a flow speed of min 1 tr per minute having a pressure of 3300 PSI Allow 6-8 hes to dry the surface in both the coats of paint as per manufacturer instructions complete all as specified and directed by Engr-in-Charge.
M&L for one coat of acrylic water based interior grade primer 0.8 irundilutedy10 sq with water in (1:1) ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent having an electric motor of min 1 HP with a flow speed of min 1 tr per minute having a pressure of 8300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified and directed by Engr-in-Charge.
M&L for 10 mm thick cement plaster with readymix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Enigneer-in-Charge. Note:- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE). 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster by manufacturer or their authorised dealer while claiming RAR/ Final Bill.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mt the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed Note Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer complete all as specified and directed by Engr-in-Charge.
M&L for one coat of acrylic water based exterior grade primer 0.9 hundiluted 10 g mtrs diluted with water in bo to be applied with fully automatic airless spray machine of paint weblication of Asian Paints Trucare Graco or equivalent having an lectric motor of mun 3 HP with a flow speed of min 1 per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified and directed by Engr-in-Charge.
M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology Excellent Dirt Pick up Resistance of Asian Paints Ltd or its equivalent with low VOC less than 50, Anti Algal properties in two coats @1.79 ttr (undiluted)/ 10 Sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 Itr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface in both the coats of paint with 8 years performance warranty from Manufacture and instructions complete all as specified and directed by Engr-in-Charge.
M/S S.K.Electricals
M/S DEVRAJ SINGHAL
The new hut furnitures
ANAND ENTERPRISES
Neeraj Enterprises
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .