Supply, installation, testing and commissioning of 100 Te capacity Electronic Pit-less Type Road Weighbridge along-with RFID Based Boom Barrier Automation System including Civil and Electrical Works along with 4 years of CAMC after 1 years of guarant

Amount

1.Supply and Fabrication of 16 Mtr x 4 Mtr platform as per the design & specification (Annexure A of Scope of Work)ISMB (600 X 210 X 12) Size in MM - Total length about 34 MTR

ISMB (450 X 150 X 9.4) Size in MM- Total length about 34 MTR

ISMB (300 X 140 X 7.7) Size in MM- Total length about 60 MTR

12 mm MS Plate- approx 66 SQ. MTR

20 mm MS Plate- approx 1.0 SQ. MTR

M20 x 50 HT Bolt & Nut

Top Bolt with Nut Machine 19 X 300

Fabrication Cost for( Supply and Fabrication of 16 Mtr x 4 Mtr platform as per the design & specification)

2.Electronic Weighing System as per specfication (Annexure B of Scope of Work)30 Te capacity digital load cell as per specification

Digital Weight Indicator (Dizitizer for Digital Load Cells)– 100 t capacity

Jumbo Display Unit

Junction Box

Computer/PC with accessories as per specification

Furniture & Fixtures for weighing room as per specification

1.5 Te Air conditioner machine with suitable voltage stabiliser (5 KVA)

3KVA Constant Voltage Stabiliser / CVT

3.RFID/ Weighbridge Automation System (with 4 years CAMC after completion of warranty period) (Annexure C of Scope of Work)RFID Tag

Long Range RFID Reader/Writer with pole and mounting

Signal Light for Traffic control

5 Mtr Long Boom Barrier complete with Trigger switch, Operating & Safety Sensor (with IP 54 protection)

3 KVA UPS with 6 nos. of batteries (65 Ah) and 2 hrs full load backup

Network Switch Managed Multi port (16/18 port)

9 U Rack

Laser printer

Integration various models existing CCTV hardware with RFID system for snapshot

Application software as per specification

Surge protection device (SPDs)

Chemical Earthing kit of suitable length

Lightening arrestor as per system requirement

HDPE pipe

Cat6 cable

cable

Battery Stand

Sockets

Connectors for wire

Plug (6/WB)

Installation, commissioning & complete integration of all the items

4.CCTV Survillance System (Annexure D of Scope of Work)5 MP BULLET IP Camera (Motorized vari-focal lens)

5 MP IP Dome Camera

LED Display 32 inches

NVR 4 channel with 1 TB Storage

8 port unmanaged switch

Installation, testing and commissioing charges

5.Lightning Arrestor and Earthing System (Annexure E of Scope of Work) Supply of 16 mtrs long tubular pole including lightning arrestor .

Transporting of 16 mtrs long tubular pole .

Erection of 16 mtrs long tubular pole with cement concrete foundation .

Supply and drawing of 10 sq mm copper cable from lighting arrestor point to earth pit .

Supply and fabrication of difference type of MS bracket .

Supply and drawing of GI Wire for making of net wire .

Supply and fixing of chemical Earth pit with providing required materials . a ) Supply of Earthing , electrode , specification for one set as b ) Length = 3000mm c ) Outer dia = 25 mm d ) Connection terminal = 14 mm e ) Pipe = Dual GI Pipe

Supply of backfill chemical earth resistance enhancing compound ( 25 kg in each bag ) 2 bag each hole .

Supply and drawing of 16 sqmm 2 core armoured aluminium cable for neutral earthing .

Labour charges for earth pit excavation, earthing installation, connection and related civil work

Testing and commissioning of earth pit as per IS:3043 standards

7. Civil Foundation for portable cabin (As per Annexure G of Scope of Work)Earth work in excavation by mechanical means (Hydraulicexcavator) /manualmeans infoundation trenchesordrains(notexceeding1.5minwidthor10 sqmonplan), includingdressingofsidesandramming of bottoms, for all lift, including getting out the excavatedsoil anddisposal of surplusexcavatedsoil as directed, within a lead of 50 m. All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying inpositioncement concreteof specified grade excluding the cost of centeringand shuttering- All work up to plinth level : 1:3:6 (1 Cement:3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying inposition specified grade of reinforced cement concrete, excluding the cost of centering,shuttering,finishingandreinforcement-All workuptoplinthlevel :1:1.5:3(1cement:1.5coarse sand(zone-III)derivedfromnaturalsources:3graded stoneaggregate20mmnominal sizede rived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening,cutting,bending,placinginpositionand binding all complete upto plinth level. Thermo Mechanically Treated bars of grade Fe-500D or more.

8.Construction of weigh bridge, foundation of weigh bridge and ramp (As per Annexure H of Scope of Work)Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Supplying 400 G polythene sheet

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position specified grade of RCC, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.:Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work

9.Commissioning and Training for Road Weighbridge (As per Scope of Work) Installation and Commissioning along with training to the operators to run the weighbridge

10. Annual Maintenance Contact (comprehensive basis) Road Weighbridge (As per Scope of Work)Comprehensive annual maintenance contract as per Annexure-F

Total impact of GST for the purpose of CTC

BAIDYA NATH WEIGHING MACHINE CO. (BID ID -1182028)

WEIGHING INDIA CORPORATION (BID ID -1177533)