Special Repair to Building No P 04 at Ulsoor Road Under AGE BnR (Central) of GE South Bangalore

Amount

Dismanteling of Asbestos cement (corrugated semicorrugated etc) sheets in roof covering complete all as directed

Dismantling framed works, rafter / timber scantling 40 Sqcm and over in sections in any position complete all as directed.

All as per item No. 2 above but in fillet, rails, posts rafters, purlins etc under 40 Sqcm in section, fixed in any position complete all as directed.

Mild steel rolled section of grade Fe 410 (Gde E-250) quality A as in main and cross beams hip and jack rafters; purlins where connected to common rafter and running rails and similar works fixed with and including angle cleats or other connecting plates complete all as directed.

Prepainted galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self taping screws or 'L' type or 'J' type or cranked hook bolt, complete all as directed.

All as per Item No. 05 above but plain sheet as in ridge

PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) for filleting and benching, slightly rounded or chamfered on edges complete all as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as directed.

25 mm thick cement concrete type B0 1:2:4 (12.5 mm graded aggregate) as in flooring and finishing surfaces of concrete in sub floor, sub-bases etc. even and rough to receive the topping layer complete all as directed.

Non Skid coloured ceramic tiles 7 to 8 mm thick (Joint free) (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in cement mortar (1:6) complete all as directed.

Non Skid coloured ceramic tiles 7 to 8 mm thick (Joint free) (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sq.m, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in cement mortar (1:6) complete all as directed.

Coloured Glazed ceramic tile in verticle surface each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as directed.

Machine cut kota stone slab flooring 18 to 20 mm thick over and including 20 mm thick cement screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade to the slab including rubbing and polishing complete all as directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) not exc 1.50 Sqm each complete all as directed.

All as per item No. 14 above but exc 1.50 Sqm and Not exc. 4 Sqm each.

Solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube stapling and fixing in opening complete all as directed.

Factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, fixing in frame at site complete all as directed.

Second class hard wood plain, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as directed.

35 mm thick of 2 nd class hardwood glazed and skeleton shutterts open rebated and prepared to receive glass, gauge etc divided into sqaure with plain chamfered or rounded mitred and retreated sash bars any numbers edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members as specified in SSR Part - I. confirming to IS 1003 (part-1) 2003 complete all as directed.

Plain framed panelled shutter 35 mm thick of 2 nd class hardwood (any number of panels), with panel of timber flat on both sides (feathered edge) or of veneered particle board medium density, commercial face veneers include for one shop coat of priming confirming to IS 1003 (part-1) 2003 complete all as directed.

Flush door shutter, 30 mm thick, fabricated at site, solid core construction, with block board core and ply wood face panels commercial type on one face and another face covered with decorative face veneer with lipping / frame to match complete all as directed.

Butt hinges medium weight rolled stainless steel and fixed of size 75 mm complete all as directed.

All as per item No. 22 but 100 mm.

Aluminium alloy, anodised, sliding door bolts 250 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extended section or cast aluminium alloy and fixed. Complete all as directed.

150 mm Aluminium anodised barrel tower bolts of extruded section complete all as directed.

All as per item No. 25 but 200 mm long.

Extruded aluminium alloy handles, fabricated type anodised 100 mm long complete all as directed.

All as per item No. 27 but 150 mm long.

Spring, 300 mm long, rat tail rod pattern, including roller and roller plate complete all as directed.

Drapery rod of high strength aluminium, powder coated (minimum 40 micron) of outer dia 28 mm and ineer dia 24.5 mm with 2 Nos of brackets (projected type / wall to wall) finials, fixed in repair complete all as directed. Make:- Sleek line type -II of MAC or Soffio-II of vista levolar or equivalent

Figured glass / pin head type and glazing with oil putty / wooden beading, in squares n exc 0.50 Sqm in each pane 4 mm thick complete all as directed.

Sheet glass, 4.8 mm thick, ordinary quality in squar pane, exc. 0.5 Sqm each complete all as directed.

Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as directed.

Mild steel iron framed work such as designer grills, gates including Pintle Hinges, stops, hand made sliding bolts with ends of bars shouldered and / or riveted, or forged into spikers framed guard bars and framed work of similar work confirming to Fe- 290 Gde –E-165, complete all as directed.

19 mm thick Veneered decorative plywood, type-I, conforming to IS-1328-1996 (with BWR resin) with decorative face veeners on one side and another side commercial ply fixed with screws to timber frame work with external teak wood lipping 6 mm thick fixed with nails complete all as directed.

French polishing on surface of decorative venior of plywood including cleaning and preparing the surface complete all as directed.

Preparation of new plywood surface and applying two coat of synthetic enamel paint over a coat of pink primer complete over 100 mm width or girth complete all as directed.

Taking up or down steel tubing and connections, 15 mm bore including cleaning for refixing or removal to store complete all as directed.

All as per item No. 38 but 20 mm bore

15 mm bore, steel water tubing, medium grade, galvanised with all fittings fixed to wall or laid in trenches, complete all as directed.

All as per item No. 40 but 20 mm bore

Dismantling of water storage tanks of capacity exc 500 ltrs and not exc 1000 ltr complete all as directed.

HDPE Water storage tank, 500 liter Capacity, Rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position complete all as directed.

Ball Valve, 20 mm bore, brass body, high pressure, with polythene float and fly nut, screwed for iron pipe of brass ferrule and fixed complete all as directed.

Gun metal globe or gate valve, heavy grade, 15 mm bore, with iron wheel head screwed at both ends for irom pipe complete all as directed. Make: Zoloto/Leader/Shakti

All as per item No. 45 but 20 mm bore

Bib tap, 15 mm bore, Fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed in repair complete all as directed. Make:- Ruby series of Cera or equivalent to Kohlar / Jaquar

Pillar tap, 15 mm bore, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe fixed in repair complete all as directed. Make:- Ruby series of Cera or equivalent to Kohlar / Jaquar

Stop Valve, 15 mm bore, stop valves / Angle valve, fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, fixed in repair complete all as directed. Make:- Ruby series of Cera or equivalent to Kohlar / Jaquar

Grating doom 125 mm dia with waste hole of PTMT with minimum weight of 40 gms complete all as directed.

PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as directed.

10 mm thick toughned glass in square N exc. 0.5 Sqm in each pane edges polished and secured with Stainless steel 'D' brackets and screws including edge polishing to exposed end for shelving , sliding doors with locking arrangement complete all as directed.

Vitreous china washdown water closet pan and trap (pedestal pattern) with plastic water closet seat black closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device with flush pipe to pedestal pan including all joints and connections to drain and flush pipe fixed in repair complete all as directed.

Health faucet with 1.5 M flexible Chromium plated tube and hook fixed to angle valve fixed in repair etc. complete all as directed. Make:- Cera / Prayag / Jaquar / Hindware / Kohlar

PVC Flushing cistern, low level of 10 litre capacity, fixed in repair, white with inlet ball valve float and handle including bracket. PVC connections 15 mm size with PTMT nut of length 450 mm etc. complete all as directed.

Flush pipe, 32 mm dia, polyethylene for low level flushing cistern, complete all as directed. Make:- Prayag / Shakti / Polytuff

Vitreous china wash hand basin, fixed in repair, white flat back of size 550 x 400 mm including, CI brackets, 40 mm CP brass waste fitting, complete all as directed.

Waste fitting 32 mm brass chromium plated for glazed ware sinks basins etc. with long screwed shanks and fly nuts, flange end bedded with red lead cement and other end fixed complete all as directed.

PVC waste pipe, 32 mm dia, for wash hand basin complete all as directed. Make:- Prayag / Shakti / Polytuff

Towel rail, chromium plated, 600 mm long, fixed in repair with chromium plated brass screws and plastic cleats (included) complete all as directed.

Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide chromium plated bracket gurard and railing 600 mm long complete all as directed. Make:- Prayag / Shakti / Hindware/Jaquar

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key scrubbing down with water etc. complete all as directed.

Demolition of brick or stone masonry built in cement mortar including all quoions arches pillars etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as directed.

Precast cement concrete block masonry with solid blocks grade C-5, exc 10 cm in width and setting in cement mortar 1:6 complete all as directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (without using extra cement) complete all as directed.

Rendering 15 mm thick on other than fair faces of brickwork or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as directed.

Preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as directed.

Preparation of newly plastered surfaces of wall and applying two coat of antifungal exterior emulsion over a coat of primer over wall care putty (minimum 1 mm thick) complete all as directed.

Complete removal of existing treatment and applying two coat of distemper oil emulsion including priming plastered and other surfaces with chalk whiting complete all as directed.

Preparing old treated surfaces of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer, over wall care putty (minimum 1 mm thick) complete all as directed.

Granite stone, polished, 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20 mm thick screed bed in CM (1:6) complete all as directed

Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 100 mm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

Dismantling boarding, any description, fixed in position with nails etc complete all as directed.

False ceiling with GI snap frame work of size 600 x 600 mm in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 170 gsm / Sqm and bottom exposed width prefinished with baked polyester paint) consisting of main `T’ runners of size 38 x 24 x 0.3 mm with suitably spaced joints to get required length spaced at 1200 mm C/C and cross T of size 24 x 25 x 0.3 mm, 1200 mm long spaced between main T at 600 mm C/C to form a grid of 1200 x 600 mm and secondary cross `T’ of length 600 mm and size 24 x 25 x 0.3 mm to be interlocked at middle of the 1200 x 600 mm panel to form grids of 600 x 600 mm and wall angle of size 21 x 21 x 0.3 mm

and laying flase ceiling tiles of 4 mm thick fibre, cement building board, non asbestos (minimum weight 4.8 kg / Sqm) fixed or laid / inserted to GI frame work with screws / clips for false ceiling work including, wherever required, cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. main T runners shall be suspended from ceiling using GI slotted cleats of size 25 x 35 x 1.6 mm fixed to ceiling with 6 mm dia and 50 mm long metal dash fastener, 4 mm GI rods with galvanized steel leveling clips spaced at 1200 mm C/C along main `T’ section (False ceiling system shall be capable to bear distributed load of minimum 15 Kg / Sqm) complete all as directed

Dismantling PVC / CI / AC drain pipe N. exc 110 mm dia complete all as directed.

PCC 1:4:8 type D2 concrete bed to drain pipe including packing under and haunching against the sides of pipe of 150 mm bore after they are laid and tested complete all as directed.

Salt Glazed Stone Ware (SGSW) drain pipe 150 mm bore laid in trenches jointed in cement mortar 1:1 complete all as directed.

Cutting out existing PCC floor, hardcore, or any other matelled, road cutting N exc. 1 M wide and N. exc 1 M in depth and making good the disturbed portion as per the existing surface after laying of sewage line / drain pipe complete all as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 150 mm thickness (below or above ground floor) complete all as directed.

Hardcore of broken stone or boulders of gauge N. exc 63 mm deposited spread and leveled in layer N. exc 150 mm thick, watered and rammed to a true surface complete all as directed.

PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in 75 mm thick plinth protection / path / paving finished even and smooth without using extra cement including forming groove 10 mm wide, 30 mm deep, filled with mastic filler complete all as directed.

75 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate), as in floors complete all as directed.

22 mm thick Chequred concrete inter locking tiles machine pressed, set and jointed and pointed in neat cement slurry as in floors over and including 20 mm thick screed bedding layer in CM 1:4, and securing properly edges of path / similar work in PCC 1:2:4 Type B1 complete all as directed.

75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as directed

75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as directed.

110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as directed.

110 mm bore PVC (SWR) bends any radius with access door complete all as directed.

Preparing surfaces of wood and wood based tiles or slate battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with, new or old, of any description and girth, not otherwise described and treated with one coat of creosote complete all as directed.

Post construction anti termite treatment (ATT) along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as directed.

Post conrtruction ATT of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors surfaces complete all as directed.

Post contruction treatment of voids in masonry (Post ATT to masonary work) using chemical emulsion @ 1 liter per holes, at 300 mm intervals including drilling holes at 45 degree and repluging them with cement mortor (1:2) to mach the existing floors complete all as directed.

Post ATT at the points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 liter per holes, by drilling 6 mm dia holes at a down ward angle of 45 degree at 150 mm centre to centre and repluging them with cement mortor (1:2) to mach the existing floors complete all as directed.

Anodised, Aluminium frames, for windows, ventilators, sliding windows etc, with one or more rebates including joining cleat for fixing etc. and thickness of section not less than 1.5 mm thick complete all as directed.

Anodised aluminium windows and ventilations shutter, side hung type or sliding type, without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clip, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as per stays 150 mm long (1 No). hinges type B-21 100 mm long (2 No) suitable handle (1 No.) complete all as directed.

Anodised aluminium window and ventilator shutters fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, roller, locking arrangements etc confirming to IS 737-1986 complete all as directed.

Anodised aluminium grill, of 50 mm aperture and 6 mm thick complete fixing to anodised aluminium frame work with packing materials etc. complete all as directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good distrubed surfaces of wall, floors, etc. complete all as directed.

Taking down unserviciable main switch DB, teak wood boards etc. and making good distrubed surfaces of wall, floors, etc. complete all as directed.

Wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and including non metalic rigid PVC conduit concealed, for modular type steel sheet pressed terminal box (recessed) with modular frame and to cover including accessories, on wall, for housing the switches, switch sockets outlets, fan regulators etc. including provision of 1.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly for one light or fan point controlled by one way switch complete all as directed. Note:- MS sunken boxes, cover plates with frame switches, sockets shall be measured and paid seperately in an appropriate item of BOQ and laying / fixing of sunken box and cover with frame is included in quoted rate.

All as per Item No. 100 above but One 3 pin socket outlet, 5 amps, on independent board.

All as per item No. 100 but wire size 2.5 sqmm for 6 pin 15 Amps switch socket combination outlet on independent board.

Ceiling rose surface bakelite 65 x 50 mm 3 terminals complete all as directed.

Switch Modular type 6 A one way complete all as directed.

One way modular switch 16 A one Module complete all as directed.

Socket outlet 2 in 1, 3 pin, 6 Amps Modular type complete all as directed.

Socket outlet, 2 in 1, 3 pin, 6 / 16 Amps modular type complete all as directed.

Modular fan regulator, step type, electronic, 2 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 3 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 4 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 5 module complete all as directed.

Supply only modular metal flush box with white cover plate with frame of 6 module complete all as directed.

MCB single pole 6 to 32 Amps 240 volts 10 KA rupturing capacity (curve-c) providing in DB complete all as directed.

All as per item No. 113 but SPN

MCB TPN 40 to 63 Amps, 415 Volts (C curve) providing in DB complete all as directed.

Sheet metal enclosure (ISI marked) distribution board SPN, 240 volts, 8 way horizontal type, double door with 200 Amps rated copper bus bar for housing MCBs, fixed flush in wall surface, and tested complete all as directed.

MCB Distribution board TPN, 415 Volts, 4 way horizontal type, double door with 200 Amps rated copper bus bar, with PVC Blanking plate, stove enameled, dust and vermine proof, for housing MCBs, fixed flush in wall surface complete all as directed.

Sub main wiring concealed type with 3 runs of 6 sqmm, single core, PVC insulated and unsheathed cable conforming to IS-694, FRLS, 1100 volts with copper conductor multi stranded drawn in non metallic PVC conduit FR grade with all accessories such as Tees, Elbows, junction box, reducers etc as requied all as directed. Note:- Three run of 6 Sqmm cable, one run of of PVC non metalic conduit with all necessary accessories will be measured as one length.

Energy efficient LED batten 20 watt 4 feet length housing in extruded aluminium natural anosised finish with end cap made of ABS plastic with white colour finish and high efficiency translucent (HET) diffuser and integral electronic cable of suitable size including taking down existing unserviceable tube light fittings complete all as directed. Make: C&S Cat No LTTB4F20WLED or equivalent of Havells / Bajaj / Wipro

LED Baten type tubelight for indoor application, 10 watt, 2 feet length polycarbonate housing with end cap made of ABS plastic with white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable sizeincluding taking down existing unserviceable tube light / CFL fiings complete all as directed. Make: C&S Cat No LTTB2F10WLED or equivalent of Havells/Bajaj/Wipro

Energy efficient LED down light, recess mount, 36 Watt 2 x 2 feet, extruded aluminium housing with milky diffuser recess mounting ultra slim LED panel integrated electronic driver of operating voltage 110 to 265 volts complete with all accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size 24 / 00.2 mm and taking down old unserviceable tube light fitting complete all as directed. Make:- Cat No. LTCRSLM36WATT2X2 of C&S / Bajal Cat No BCTBLR-36 W LED FP CW / Crompton Cat No. LCPL-36-CDL(2X2) or its equivalent in Philips / Jaguar / Wipro

LED Street light fitting 25 W with pressure die cast housing along with prismatic poly carbonate diffuser and LEDs with secondary optics and IP 65 protection complete with all accessories including conneting up with twin core twisted flexible copper conductor cable of suitable size 24 / 0.2 mm and taking down old unserviceable street light fitting complete all as directed.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connecting with steel GI earth wire 4mm dia by means of bolt nut check nuts and washers including PCC pit with 1:2:4 type B-1 using 20 mm graded stone aggregate and frame cover of angle iron 25 x 25 x 6 mm, MS sheet 3 mm thick and handle of 6 mm dia MS bar made to shape, GI medium grade 20 mm bore pipe for watering common salt chorcoal funnel wiremesh earth work in any type of soil returning filling in and removal of soft / loose soil to a distance n.exc 5 mtr including earth test point and making connections testing on completion all as per electric plate No 3 of SSR Part-I, complete all as directed.

Less Schedule "A" Credit (For Detail description, and rate of particular item, Please refer Schedule "A" Credit Page as attached in Tender Doccuments)

S SUDHAKAR

ShaikPyarejanandsons

ROHAN BUILDERS

Elite Constructions

apoorva builders