SPECIAL REPAIRS TO BLDG NO P 33 3 AND PROVN OF MISC SANCTIONED WORKS AT JALAPAHAR UNDER AGE I DARJEELING

Amount

Dismantling boarding of any description, fixed in any position with nails, complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab/Blankets of any thickness, etc. including Cover Fillets of any description, complete all as specified and as directed.

Dismantling Timber Scantlings 40 Sq Cm and Over in Section as in Unframed work, in any position, complete all as specified and as directed

Taking down Chowkat or Frame (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description not exc 1.0 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description exc. 1.0 Square Metre and not exc. 2.0 Square Metre Each, complete all as specified and as directed.

Demolition of Cement Concrete (Reinforced) of any description in any position not otherwise specifically provided for, complete all as specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove Dust, debries/ rubbish etc., complete all as specified and as directed.

Taking down old steel tubing 15mm bore (dia) and connections, including cleaning and removing from site of work complete all as specified and as directed.

Taking down old steel tubing 20mm bore (dia) and connections, including cleaning and removing from site of work complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.

Surface dressing n. exc 15 cm deep and getting out in soft/loose soil, complete all as specified and as directed.

Excavation in Trenches, not exc. 1.50 Metre wide and not exc 1.50 Metre in depth for any type of foundation/cable trench and getting out in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

M&L Cement Concrete 1:4:8, type D-2 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, Foundation of Pole etc. including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed.

M&L Brick Work with Fly Ash Bricks, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Hardcore with broken stone of gauge exc. 63mm but not exc. 100mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L for 40mm thick second class hardwood Boarding, Planed one side, with butt joints and fixed with nails, as in floors, complete all as specified and as directed.

M&L for 20mm thick 2nd class hardwood boarding work fixed with nails planed one side with butt joint as in Shelves, Cupboards, racks, Palmet Box, Skirting etc., complete all as specified and as directed.

M&L for 20mm thick 2nd class hardwood boarding work fixed with nails planed one side with butt joint as in Roofing, Ceiling, weather boarding, eaves board etc., complete all as specified and as directed.

S&F Aluminium snap grid frame work for false ceiling size of grid 605 x 605 mm all as specified and as directed.

S&F 4mm thick non asbestos cement plain building boards, fixed to aluminium/ timber frame work with screws as in ceiling complete all as specified and as directed.

M&L second class hard Wood as in scantlings, timber fixed work clean swan complete all as specified and as directed.

M&L Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.

S&F Factory made 35mm thick, 2nd class hardwood plain framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkhats complete all specified and as directed.

M&L Factory Made Second Class Hardwood 30mm thick Glazed and Skeleton Shutters, open rebated and prepare to receive Glass, Gauge, etc. divided into Squares with Plain Chamfered or Rounded, mitred Sash Bars of any Numbers, Edges of Framing plain chamfered or rounded fitted with cut and mitred Beads for securing Glass, etc sizes of members of Shutter as specified in MES Schedule Part-I Section 8, Clause No. 8.24(b) and fitted to Wooden Chowkat, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50x47mm made out of 5.0mm plain colour PVC Sheet reinforced with Mild Steel Square Tube, and fixing in Opening as per Specifications and Drawing, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (style) consisting of frame made out of Mild Steel Tubes for Top & Bottom Rails having Mild Steel Frame shall be covered with heat moulded plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and plain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail; Panelling of plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/ sealed to the Stiles and Rails with suitable PVC Sheet Beading and joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawing, complete all as specified and as directed.

S&F Mild Steel Butt Hinge of size 100mm long (medium weight) and fixed with screws, complete all as specified and as directed.

S&F Mild Steel Butt Hinge of size 75mm long (medium weight) and fixed with screws, complete all as specified and as directed.

S&F Aluminium Alloy Handle 125mm long Febricated type, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium Alloy Handle 150mm long Febricated type, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt 125mm long, Extruded Section and fixed, complete all as specified and as directed.

S & F in repair 150mm long mild steel stove enamelled black hasp & staple including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded aggregate) as in Kerbs, Coping, Hold fast blocks etc. Chamfered Edges including use and waste of Form-work as required/ordered at Site(s), complete all as specified and as directed.

M&L Mild Steel Flat Iron 25x3 mm as in Holdfast size for Door, Window Frames or Chowkat, etc., cut to length or drilled hole and fixed with screw, etc. grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S&F Sheet Glass, ordinary quality, 3.0mm thick, Square or Rectagular, area not exc. 0.50 Square Metre in Each Pane and fixing to wooden/steel Shutters, etc. with oil putty or beading, complete all as specified and as directed.

S&F in-repair Curtain rails,mild steel,chromium plated with fixing brackets,stops,rollers etc complete all specified and as directed..

M&L Rendering (Internally) 15mm thick in Cement Mortar 1:6 on Fair face of Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering (Externally) 15mm thick in Cement Mortar 1:4 in two layers on Brick Walls/Concrete Surfaces, 5mm thick top layer mixed with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE: WPC shall be Measured and Paid as ‘Supply only’ under relevant Item.

Supply only Integral Water Proofing Compound(WPC), conforming to IS-2465:1975 and as approved, complete all as specified and directed.

S&F Rotational Moulded Polyethylene Water Storage Tank of 500 Litre capacity (Cylindrical Vertical with Closed Top), 3 layered, hoisted and fixed in position all as specified in MES Schedule Part-I , complete all as specified and as directed

S&F Rotational Moulded Polyethylene Water Storage Tank of 2000 Litre capacity (Cylindrical Vertical with Closed Top), 3 layered, hoisted and fixed in position all as specified in MES Schedule Part-I , complete all as specified and as directed

S&F Ball Valve 20mm dia (minimum Weight 210 Grams), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

S&F of 15 mm dia Gun metal, Globe or Gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F of 20 mm dia Gun metal, Globe or Gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

M&L for Screed Bed or Bedding Layer 20mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed.

M&L for Rendering or Bedding Layer 10mm thick in Cement Mortar 1:3 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and as directed.

M&L for providing non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match complete all as specified as directed. Note - Screed bed will be measured to paid seperately.

M&L Glazed Ceramic Tiles 300x200x7mm thick in Vertical Surface i.e. Dado, Skirting, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M&L Chequered Cement Concrete Coloured Tiles 300x300x25mm thick in Floors, etc., set, jointed and pointed in Neat Cement Slurry in Floors with Grey Cement and no Pigment, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M&L preparing previously untreated Surfaces of Wood and Wood Based Materials of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Backs of Chowkats, etc. Area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm Each including Sanding with clean sharp Sand after tarred complete all as specified and as directed.

M&L preparing previously untreated Surfaces of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Holdfast or Similar Small Items area tarred not exc. 0.10 Sqm Each including Sanding with clean sharp Sand after tarred, complete all as specified and as directed.

M&L preparing new Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of pink primer, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of Walls and applying Two Coats of Oil Bound Distemper over a coat of Chalk Whitening, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of Walls and applying Two Coats of Cement base paint over a coat of alkali-resistant primer, complete all as specified and as directed.

M&L for preparing newly plastered surfaces or boarding and applying Three Coats of White wash in walls/ceiling, complete all as specified and as directed.

M&L for preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.

M&L Complete removal of existing Surface Treatment by washing rubbing down and stopping of old decorated/treated surfaces of Walls and applying Two Coats of oil bound distemper, complete all as specified and as directed.

M&L preparing old treated/decorated surfaces of Walls and applying Two Coats of White Wash, complete all as specified and as directed

M&L preparing Old Painted Wood and Wood base Surfaces of any description, not otherwise described over 10 Cm Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/grade), complete all as specified and as directed.

M&L Cement Concrete 1:4:8, type D-2 (40mm graded aggregate), 100mm thick as in Sub-base of Floor, Path, Hardstanding, etc., laid in alternate bays, finishing Concrete Surfaces Even and Fair, complete all as specified and as directed.

M&L Cement Concrete 1:3:6, type C-1 (20mm graded aggregate), as in Steps/Path etc., finishing Concrete Surfaces Even and Fair, complete all as specified and as directed.

M&L Reinforced Cement Concrete (Nominal Mix) 1:1½:3 (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., rough finished surfaces of Concrete, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L Steel Work in Tubular Trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed.

M&L for 1.60mm thick Mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, topped ends, outlets, etc. as required, complete all as specified and as directed.

Supply and fix in-repair Bib Tap 15mm bore (dia), Cast Copper Alloy with Crutch or Butter-fly Handle, Fancy type, chromium plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

Supply and fix in-repair Stop Valve 15mm bore (dia), Cast Copper Alloy, Chromium Plated, (Consealed Type), screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

Supply and fix in-repair Pillar Tap 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

Supply and fix in-repair of Brass Chromium Plated Tubular Towel Rail, 20mm dia, 'D' Type, 60 cm long between flanges with bracket and fixed to Walls with Chromium plated Brass Screws, complete all as specified and as directed.

S&F in-repair Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed.

Supply and fix in-repair of Brass Chromium Plated Soap dish, any type, fixed to Walls with Chromium plated Brass Screws, complete all as specified and as directed.

S&F in repair cast iron floor trap 100mm dia with grating incl jointing to waste pipe in cement concrete 1:2:4 type B-1 complete all as specified and as directed.

S&F in repair, Vitreous China Wash Hand Basin 550x 400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair Vitreous China White Squatting Pan (Orissa Pattern) of size 580x440 mm with integral foot rests, 'P' or 'S' Trap and (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces and fixed-in-repair, complete all as specified and as directed.

Supply and fix in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, making good disturbed surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair, Stainless Steel Sink with Drainage Board l.0mm thick Over-all size 915x460mm and Bowl size 410x330x160mm for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Brass Chromium Plated, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in-repair of Flexible Waste Pipe 32 mm bore dia (bore) 90 Cm long for Wash Hand Basin, Sink, etc., complete all as specified and as directed.

S&F in-repair of PVC Connection Pipe 15mm size with PTMT Nuts of length 450mm, complete all as specified and as directed.

Re-fixing including taking down of existing PVC Casing caping of any description in original position with proper alignment after necessary rectification of wall/ ceiling surfaces, complete all as specified and as directed. Note:- Any treatment as required at site shall be measured and paid separately under respective item of works.

Re-fixing including taking down of existing tubelight with or without fitting, switches, sockets of any descriptions in original position after necessary rectification of wall/ ceiling surfaces, complete all as specified and as directed. Note:- Any treatment as required at site shall be measured and paid separately under respective item of works.

M&L preparing new Steel and Iron surfaces of any description, over 10cm width or girth by scrapping and applying Two Coats of Synthetic Enamel Paint (as approved) over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

M&L for Cutting chases in brick wall not exc 10 cm girth for concealed water tubing or concealed conduit wiring, etc. and making good to facings where required and pointing in cement mortar 1:3 to walls, complete all as specified aand as directed.

RAI CONSTRUCTION

HIRA SINGH

Damdoo Bhutia