Additional works in Boiler House Upgradation of Central Heating System in Govt Dental College and Hospital Srinagar

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters (80x1.20 mm M.S. laths with 1.20 mm thick top cover)

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on, over and including water thinnable priming coat to give an even shade

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75 litre/10sqm of approved brand and manufacture

Complete rewinding of 03 HP motor of Gear Oil pump No 01 and reinstallion of the same

Repairs to Gear oil pump No 02 coupled with the 03 HP capacity electric driven motor by way of replacement of Coupling and other worn out/damaged parts. The pump is to be reinstalled back after proper repairs for smooth functioning

Installation of available aluminium frame work, particle board and glass. The job includes providing and fitting of all accessories required for installation of the frame work.

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) 50 mm thick with 20mm nominal size stone aggregate. finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.

Dismantling and Reinstalling of Structural steel work welded in built up sections, trusses and framed work, including colour coated tin sheets. The job includes cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Reinstallation of 03 No MS tanks of capacity 1000 Ltrs (02 Nos) & 2000 Ltrs (01 No). The necessary piping, fittings and valves are to be provided by the contractor

Providing & installation of 4 Pole 250 Amp 50 KA breaking capacity MCCB for main incoming supply