Loading
Loading…
Loading…
Tender Value
₹39.3 L
EMD Value
₹78,700
Closing Date
23 Jul 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
POWER
16 conditions · 1 needing a document upload
The tenderer should have a valid Electrical Contractor Licence from the concerned statutory authority. The above said Electrical Contractor Licence is to be submitted along with the offer otherwise the offer shall be summarily rejected. Compliance may be ensured for following.
Electrical Contractor License a.Work shall be carried out by contractor, having valid Electrical Contractor License for carrying out installation work under direct supervision of persons holding valid certificates of competency issued by State Government.
b. Tenderer shall have a valid Electrical Contractor's License issued in name of firm by any State Government and shall furnish all particulars of the Electrical license held by him along with the tender documents.
c.Successful tenderer shall furnish names and particulars of certificate of competency of supervisor and workmen to be engaged for carrying out this work.
d.By a Gazette notification, Govt. of India has appointed Chief Electrical Engineer, N. Rly to be the Electrical Inspector and has directed that he shall exercise powers and perform functions of an Electrical Inspector under the Indian Electricity Act 2003 and Indian Electricity Rules 1956
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
29 conditions · 5 needing a document upload
GSTIN number: Bidder shall submit attested or self attested copy of GSTIN certificate.
Following documents shall be submitted by the tenderer: (A)SOLE PROPRIETOR SHIP FIRM: (i)All other documents in terms of clause 1.1.12 of tender document . (B)HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii)All other documents in terms of clause 1.1.12 of tender document. (C)PARTNERSHIP FIRM:(i)A notarised copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii)A notarised or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm.(iii)An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract.(iv)All other documents in terms of clause 1.1.12 of tender document . (D)JOINT VENTURE (JV): APPLICABLE ONLY FOR WORKS COSTING MORE THAN Rs.10.00 Cr. Not applicable for this tender. (E)Company registered under Companies Act- 2013:(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company.(ii)A copy of Certificate of Incorporation.(iii)A copy of Authorization / Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv)All other documents in terms of clause 1.1.12 of tender document. (F)LLP (Limited Liability Partnership) Firm under LLP Act-2008: (i)A copy of LLP Agreement.(ii)A copy of Certificate of Incorporation.(iii)A copy of Power of Attorney / Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.(iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (G)Registered Society & Registered Trust: The tenderer shall submit: (i)A copy of the Certificate of Registration.(ii)A copy of Memorandum of Association of Society/Trust Deed.(iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.(iv)A copy of Rules & Regulations of the Society.(v)All other documents in terms of clause 1.1.12 of tender document .
The tenderer shall submit a copy of certificate (Annexure 19(A)) in case of other than Company/Proprietary firm by each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP) etc, as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatory incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. Note:- As per railway board letter No. 2022/CE-I/CT/GCC Correspondence Dated: 14.05.2024 "On IREPS Module, a facility has already been created for online submission of Annexure-V. Therefore, the provision of downloading of Annexure-V of GCC & uploading of physically signed Annexure-V by the tenderer had been discontinued on IREPS".
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Payment of Bid-security in respect of E- tendering will be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-VIA of GCC Works 2022 and shall be valid for a period of 90 days beyond the bid validity period and any offer without the same will be treated as invalid. Details of bank account no. a n d technical details have been provided for in the software (IREPS) to which prospective registered tenderers will have access at the time of tendering.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i) A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii) The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids). (iii) Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv) The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v) The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. (vi) The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii) The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii)If the envelope is not sealed and marked as instructed above, the Authority assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
1. Only firm recognized by department of industrial policy and promotion (DIPP) as "Startups" shall be exempted from payment 4.1.1 of Bid Security as per GCC 2022. 2. All other firms except described above shall be required to submit the Bid Security as per terms and conditions of tender.
PAN CERTIFICATE : PAN The tenderer shall submit the photocopy of Permanent Account Number (PAN) issued by Income Tax authority attested by Gazetted officer / self attested.
The tenderer shall study the Northern Railway General Conditions of Contract Regulations for Tenders & Contracts - 2022 or latest along with tender documents before submission of the tender.
Applicable charges/recoveries/Advance etc. (Deployment of Technical supervisors per attached Annexure XIII) is applicable.
There is an option of payment to contractor through a letter of credit (LC) arrangement (Authority Railway Board's letter no. 2018/CE-I/CT/9 dated 04.06.2018)as given in clause 1.3.14 of tender document.
GCC works 2022(or latest if any) should be the integral part of this tender.
Electrical work in c/w Provision of Rubberized level crossing at 27 Nos existing level crossings in the jurisdiction of Sr.DEN-I/FZR and Electrical work in c/w Provision of 01 nos. 100 KL RCC OH water tank at GNA & 1 no at 225 KL at FZR in lieu of old abandoned steel OH water storage tank with plumbing pipes with pump house, bore & pump and Electrical work in c/w Provision of 5 Nos new SMC Over Head Tank of 100KL capacity each at BXB, LNK, MQS, GHS & JBD stations and provision of boring & pump house etc and Electrical work c/w Replacement of RCC tank of 2,25,000 liters capacity including Pump House and improvement to drainage system in Colony no. 1, 2, 3 & 4 at Firozpur.
251-Elect-T-09-2025-26
251-Elect-T-09-2025-26
Open
Works - General
6 Months
Firozpur, Punjab
₹0
₹78,700
23 Jul 2025
2 Jul 2025
79 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 39,34,423.28 | ||
| — | 50.00 | — | — | ||
| Supply of 180x100x60 mm deep M.S switch box conforming to IS 5133 ( Part - I ) - 1969(latest version) with white Phenolic laminated sheet cover of approved make on front of box with brass screws & cup washers, recessing as per Tech. Specification including earthing. | — | — | — | 3,723.5 | |
| — | 30.00 | — | — | ||
| Supply, fixing, testing commissioning of MS switch boxes of the 300X200X75 mm deep size made out of 16 SWG MS sheetduly painted / coated with red oxide primer with egg white hylem sheet 3 mm. thick as per tech.specification, ISS / IE Rules and site requirement. Hylem sheet shall be larger than MS Boxes of followingsizes:- ( NOTE :- The MS Boxes shall be with earthing bolts and hylem sheet shall be fixed with 04 Nos.brass machine screws and washers etc.) | — | — | — | 4,882.8 | |
| — | 8.00 | — | — | ||
| Supply of 300x200x100 mm deep M.S switch box conforming to IS 5133 ( Part - I ) - 1969(latest version) with white Phenolic laminated sheet cover of approved make on front of box with brass screws & cup washers, recessing as per Tech. Specification including earthing. | — | — | — | 1,470.08 | |
| — | 49.00 | — | — | ||
| Wiring for 5 pin 5 Amps plug points 5 Amps capacity with 2x1.5 sq.mm FRLS PVC insulated unsheathed multistranded copper conductor s/core cable in recessed PVC conduit pipe 25 mm dia including provision of 3 pin 5 Amps socket outlet with 5 Amps piano type switches and earthing of 3rd pin and MS box with 14 SWG GI wire as required at site. | — | — | — | 4,597.18 | |
| — | 44.00 | — | — | ||
| Wiring for 3 pin 15 Amps plug points 15 Amps capacity with 2x2.5 sq.mm FRLS PVC insulated unsheathed multistranded copper conductor s/core cable in recessed PVC conduit pipe 25 mm dia including provision of 3 pin 15 Amps socket outlet with 15 Amps piano type switches and earthing of 3rd pin and MS box with 14 SWG GI wire as required at site. | — | — | — | 7,438.64 | |
| — | 490.00 | — | — | ||
| Supply of Piano Type switch 5A (1-way) as per IS 4949 -1968(latest version) /Bell push as per IS 4794 ( Part 2 ) -1986(latest version)/flush type socket outlet as per IS 1293 -1988(latest version) & installation on the recessed switch box including cutting of phenolic laminated sheet, connection, testing & commissioning as per Tech. Specifications. | — | — | — | 8,178.1 | |
| — | 2500.00 | — | — | ||
| Supplying, laying, testing and commissioning of FRLS 1.0 sq mm PVC insulated multistranded copper conductor s/core cable1100 Volt conforming to IS-694 (latest version), make Finolex, Havells, Polycab, KEI in the recessed PVC conduit pipe 20 mm dia as required at site. | — | — | — | 29,000 | |
| — | 3300.00 | — | — | ||
| Wiring for light points with supply and laying of FRLS PVC insulated multistranded copper conductor cable 1100 Volt 1.5 Sq.mm multi stranded confirming to IS-694 latest in the existing PVC pipe. | — | — | — | 41,316 | |
| — | 1900.00 | — | — | ||
| Supply, laying, fixing,testing and commissioning of 2.5sq mm FRLS, PVC insulated multistranded copper conductor single core cable 1100 Voltsconfirming to IS-694(latest version),make Finolex,Havells, Polycab, KEI or equivalent in the existing PVC conduit for wiring of point wiring/circuit wiring/sub main/main as perTech Spec-I attached, IS & IErules. | — | — | — | 34,599 | |
| — | 250.00 | — | — | ||
| Wiring for sub-main with 2x2.5 Sq mm FRLS PVC insulated multistranded copper conductor s/core cable in the recessed PVC conduit pipe 25 mm dia as required at site. | — | — | — | 9,635 | |
| — | 1590.00 | — | — | ||
| Supply and recessing/fixing of 25mm (Medium) PVC conduit pipe conforming to IS 9537/Pt.III/1983 or Latest Version with accessories,junction box, etc including making chase, plastering/clamping etc as per technical specifications. | — | — | — | 57,399 | |
| — | 14.00 | — | — | ||
| Supply, fixing, testing and commissioning of LED tube light system wattage 18 Watt to 20 Watt complete with all mounting arrangement & accessories & flexible copper wire for connection from ceiling rose as per ISS/IR rules & site requirement as per CEE/NR Specification No.CEE/NR/121- Elect/PS/2018 (Rev '3') Dated 28.06.2018 & CEE/NR/121-Elect/PS/2019 (Rev.4) dated 04.11.2019 or latest, | — | — | — | 7,798 | |
| — | 72.00 | — | — | ||
| "Supply, fixing, testing and commissioning of LED light luminaries, having system wattage 1x > 18w (Max.), LED tube and inbuilt LED driver, CRCA body powder coated, complete with all mounting arrangement, accessories. The LED based 4 ft. tube light (lamp) shall be of make Phillips, Bajaj,Havells or similar conforming to CEE/NR's spec. No. CEE/NR/121- Elect/PS/2018 (Rev- '3'), & PCEE/NR's spec. No. PCEE/NR/121- Elect/PS/2019 (Rev- '4') or latest" | — | — | — | 39,914.64 | |
| — | 82.00 | — | — | ||
| Supply, fixing,testing and commissioning of 3-pin ceiling rose 5 Amp capacity on existing MS/PVC conduit junction boxes/casing caping Anchor, Cona, Kinjal, SSK or equivalent as per IS, IE rules and site requirement. | — | — | — | 1,027.46 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing and commissioning of energy efficient 230V, 50Hz a c ceiling fan size of 1200mm sweep having wattage of 28W, range of voltage operation at various speed - 120 to 260V AC with 5 step speed control electronic regulator, copper winding complete as per IS : 374 - 1979 or laterst, IE rule & site requirement. Make Bajaj, Usha, Havells, Crompton, Orient or equivalent. | — | — | — | 30,889.7 | |
| — | 50.00 | — | — | ||
| Supply, erection, testing and commissioning of the following Double door wall mounted Pre-fabricated L.T. Distribution Boards of approved make, as per explanatory note & comprising; (i) Incoming MCB 40 A DP 10 KA B/C - 1 No. (ii) Outgoing MCB 6 to 32 A. SP 10 KA B/C - 4 Nos. | — | — | — | 76,777 | |
| — | 400.00 | — | — | ||
| Supply & erection of 103 mm Inner dia Double Walled Corrugated pipe in ground under Railway track/road as required and as per explanatory note. | — | — | — | 1,34,236 | |
| — | 64.00 | — | — | ||
| Supply & erection of 5M pole with single arm bracket hot dip galvanized octagonal pole with top 70 mm and bottom 130 mm around face made of 3 mm thick, steel base plate size 200x200x12 mm complete with appropriate sleeve at the top of the pole for mounting arm bracket 300 mm long suitable for LED street light fittings including casting, muffing with cement concrete foundation (1:2:4) painting, earthing and foundation GI nut, bolts with washer and smart pack junction box with single pole MCB and terminals as per explanatory note | — | — | — | 5,65,333.12 | |
| — | 64.00 | — | — | ||
| "Supply and erection of 45 W LED Street light fitting operating voltage single phase 230 volts AC, 50Hz complete with all accessories as per CEE/NR Specification No.CEE/NR/121- Elect/PS/2018 (Rev '3') Dated 28.06.2018 & CEE/NR/121-Elect/PS/2019 (Rev.4) dated 04.11.2019 or latest, including connection with 2x2.5 sq.mm PVC insulated multi stranded FRLS copper conductor cable, testing, commissioning & earthing required as per specification" | — | — | — | 2,16,721.92 | |
| — | 81.00 | — | — | ||
| Earthing arrangement by providing earth electrode of GI pipe 50 mm dia (B class) 4.5 meter long with flange including 6 SWG GI earth wire from earth pipe to connecting point on switch board to distribution board/pole etc. as per site requirement including masonry enclosure as per Tech specification at annexure 'A' relevant ISS & IE rules and site requirements. A suitable CI/MS/RCC cover as approved by Rly . Representative, cover with locking arrangement shall be provided. | — | — | — | 1,81,878.21 | |
| — | 1233.00 | — | — | ||
| Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as mentioned in explanatory note. | — | — | — | 10,912.05 | |
| — | 7.00 | — | — | ||
| Supply & testing OF ISI MARKED ENERGY EFFICIENT SUBMERSIBLE PUMP SET ,800LPM 90 METER HEAD MAXIMUM OD 146MM WITH SUBMERSIBLE CABLE OF SUITABLE SIZE OF 3 METER LENGTH , 2900 RPM WITH COUPLED MOTOR OF CAPACITY 25 HP SUITABLE FAN OPERATION ON 415V+_ 5% ,3 PHASE 50 HZ CONFIRMING TO IS 8034-2018 OR LATEST. Make- KSB, Amrut & Sabur or similar. | — | — | — | 3,26,970.35 | |
| — | 12.00 | — | — | ||
| Supply & testing : Submersible pump set ISI marked 500 LPM, 90 Mtr head with maxim OD 142 mm submersible cable size length 3 mtr 2900 RPM with coupled motor of capacity 15 HP suitable for operation on 415 Volt +/- 5%, 3 phase, 50Hz conforming to IS 8034-2002 or latest and also having impller & bush of Brass on metal alloy as per attached technical specification. Make- KSB, Amrut & Sabur or similar. Make. | — | — | — | 5,38,372.68 | |
| — | 9.00 | — | — | ||
| "Lowering of submersible pumps (3 phase) from existing bore upto depth of 200 feet. " | — | — | — | 37,800 | |
| — | 1005.00 | — | — | ||
| Supply and fixing of GI pipe B Class 3 inch dia with MS flanges holding, locking system for safety and checking dropping down of submersible pump upto non return valve and connection with sluice valve to be matched with delivery pipe at ground level. | — | — | — | 5,28,268.2 | |
| — | 8.00 | — | — | ||
| Design, manufacture and supply, fixing of Digital programmable fully automatic star delta starter control panel suitable for 30 HP submersible pump, wall mounting type made up in sheet steel enclosure of 16 SWG of power coated paint with the following electrical components/switchgears housed and neatly wired using multistranded PVC insulated copper cable certified to IS 694 or latest. The panel shall have provision at the bottom for the entry and exit of incoming and outgoing cables as per detailed specification enclosed. | — | — | — | 3,27,096 | |
| — | 10.00 | — | — | ||
| Supply,fixing,testing and Commossioning of 20 HP fully automatic star-delta starter for submersible pump with overload current range 20-32amp, with single phase protection, Dry run, over voltage , under voltage and phase reversal with all accessories and as per site requirement. | — | — | — | 1,61,370 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing and commissioning Sluice Valve 3 inch dia and Non return Valve 3 inch dia and CI bends complete with connection etc. of make Standard, BEER, Leader / conforming to latest version of relevant IS CODE. | — | — | — | 56,916.7 | |
| — | 2450.00 | — | — | ||
| Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminum Clamping socket/lugs, testing and commissioning of Above 25 sq.mm | — | — | — | 1,47,612.5 | |
| — | 13.00 | — | — | ||
| Design, manufacturing of floor mounted MS feeder post made of MS sheet 16 SWG Die pressed of size 550mm x 450mm x 275mm deep complete with Aluminium bus bars four Nos. having cable glands 2 Nos. duly grouted with cement concrete ratio 1:2:4 duly earthed with earthing terminals. | — | — | — | 47,190.65 | |
| — | 250.00 | — | — | ||
| Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminium Clamping socket/lugs, testing and commissioning of upto 25 sq.mm | — | — | — | 16,115 | |
| — | 1.00 | — | — | ||
| SUPPLY, FIXING OF HEAVY DUTY CHAIN PULLEY BLOCK (ISI MARKED) CONFIRMING TO IS:3832, THREE TONNE CAPACITY, FORGED STEEL SHANK HOOKS to IS:15560, LIFT 07 METER. DOUBLE FALLS OF LOAD CHAIN,LOAD CHAIN DIAMETER. 9.5 MM, GR.80 TO IS:6216, HAND CHAIN 6 MM. DIAMETER. GR. 30 to IS:2429 (Part-I). (TOTAL LENGTH OF HAND CHAIN 12 METER LONG). | — | — | — | 23,118.68 | |
| — | 41.00 | — | — | ||
| Laying of cable under ground through 160mm dia HDPE pipe by MicroTunneling cable laying method including supply and jointing of HDPE pipe. | — | — | — | 72,746.3 | |
| — | 4.00 | — | — | ||
| Supply of Batten/Angle Holder/ceiling rose & installation on the Junction Box of laid conduit including connections, Testing & commissioning as per Tech. Specification. | — | — | — | 68.72 | |
| — | 2.00 | — | — | ||
| Supply, erection, testing and commissioning of the following Double door wall mounted Pre-fabricated L.T. Distribution Boards of approved make, as per explanatory note & comprising; (i) Incoming MCCB 4Pole 63 A 35 KA B/C - 1 No. (ii). Outgoing MCB 6 to 32 A. SP 10 KA B/C (4 Nos. On each Phase) - 12 Nos. | — | — | — | 29,233.62 | |
| — | 2.00 | — | — | ||
| Supply & testing : Five star rated 150 mm dia submersible pump set 3 phase 415 volt, 50 Hz, 20 HP/15 KW at head 80 meter, discharge 750 LPM model no. DSP8JFM50 of Duke make or similar. Manufacturer's authorization with valid dealership certificate required for these pumps with- Kirloskar, KSB, Falcon, CRI ,Lubi, Duke, Shakti pump, MBH pump, Amrut & Johnson. Warranty one year | — | — | — | 90,000 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing & commissioning of GSM based pump panel of capacity 3- 99 Amp with inbuilt safety for motor against single phasing, over current, dry run protection with calibrated digital display for voltage and current with facility of 100% correct reporting of motor / power / fault / switch position (Latest version) of make Khayatee, L&T or equivalent. | — | — | — | 29,460 | |
| — | 1.00 | — | — | ||
| Design, manufacturing, supply & fixing of box of size 16"x11"x6" duly pre-coated with red oxide and painted with enamel paint. | — | — | — | 3,100 | |
| — | 1.00 | — | — | ||
| "Design, Manufacturing, supply, installation, testing and commissioning of wall mounted electric control panel for 15 to 25 HP for operation of submersible pumps complete in all respects as per technical specifications." | — | — | — | 31,256.48 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .