REPAIR RECANNING PAINTING AND POLISHING TO STEEL AND WOODEN FURNITURE AT BRC DANAPUR CANTT AND MUZAFFARPUR UNDER GE DANAPUR CANTT

Amount

BED PLYWOOD TOP(FD-246,247 )

M&L for taking out old damaged/unserviceable head rest of bed plywood top and supply & fixing new head rest (of suitable size), 3.5 mm thick one side teak faced and other side commercial plywood including preparation of surface & applying high gloss French polish on newly fixed head rest to match the colour with existing surface complete all as per drg and as directed.

All as per item No.1.01 above but broken foot rest complete.

M&L for taking out old damaged/unserviceable long rails of bed plywood top and supply and fixing new long rails made of Ist class hard wood (MP teak) minimum size 1800x100x35 mm and applying high gloss French polish on newly fixed long rails to match the colour with existing surface complete all as per drg and as directed.

M&L for taking out old damaged plywood top and supply and fixing new ply wood of suitable size, 12 mm thick commercial type, grade BWP (minimum size 6’ x 3’) complete all as per drg and as directed.

CHAIR DINING(FD-16, 279,228, 203)

M&L for taking out old broken unserviceable front leg of chair dining and supply & fixing new front leg of suitable size, made of Ist class hard wood (MP teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing chair complete all as per drg and as directed.

All as per item No. 2.01 above but rear leg complete.

All as per item No. 2.01 above but side rails complete.

All as per item No. 2.01 above but rear rails complete.

All as per item No. 2.01 above but front rails complete.

All as per item No. 2.01 above but side stiffeners complete.

All as per item No. 2.01 above but center stiffeners complete.

All as per item No. 4.01 above but back rest complete

CHAIR WRITING(FD-250,280)

M&L for taking out old broken unserviceable front leg of chair writing and supply and fixing new front leg of suitable size ,made of Ist class hard wood (MP teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing chair complete all as per drg and as directed.

All as per item No. 3.01 above but rear leg complete.

All as per item No. 3.01 above but side rails complete.

All as per item No. 3.01 above but rear rails complete.

All as per item No 3.01 above but front rails complete.

All as per item No. 3.01 above but arm complete.

All as per item No. 5.01 above but side stiffeners complete.

All as per item No. 3.01 above but center stiffeners complete

All as per item No. 3.01 above but back rest complete.

CHAIR EASY(FD- 17,201,229)

M&L for taking out old broken unserviceable front/rear leg of chair easy and supply & fixing new front leg of suitable size made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing chair complete all as per drg and as directed.

All as per item No. 4.01 above but front rail complete.

All as per item No. 4.01 above but rear rail of seat complete

All as per item No. 4.01 above but top rail of back complete

All as per item No. 4.01 above but bottom rail of back complete.

All as per item No. 4.01 above but arm complete.

TABLE PEG (FD-25,236,277)

M&L for taking out old broken unserviceable leg of table peg and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as per drg and as directed.

All as per item No. 5.01 above but side rail complete.

All as per item No. 5.01 above but front/rear rail complete.

All as per item No. 5.01 above but side stiffener complete.

M&L for taking out broken/un-serviceable table top of table peg and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board ,bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and directed.

TABLE CENTRE(FD-29, 274 & 235)

M&L for taking out old broken unserviceable leg of table centre and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as per drg and as directed.

All as per item No. 6.01 but broken side rail complete.

All as per item No. 6.01 above but front/rear rail complete.

All as per item No. 6.01 above but broken side stiffener complete.

M&L for taking out broken/un-serviceable table top of table centre and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and as directed.

TEAPOY(FD-64,232,278)

M&L for taking out out old broken unserviceable leg of teapoy and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as per drg and as directed.

All as per item No. 7.01 above but broken side rail complete.

All as per item No. 7.01 but broken front/rear rail complete.

All as per item No. 7.01 above but side stiffeners complete.

M&L for taking out old broken/un-serviceable table top of teapoy and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and as directed.

TABLE DINING 6 PERSONS(FD-30, 239, 273, 376)

M&L for taking out old broken unserviceable leg of table dining and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as per drg and as directed.

All as per item No. 8.01 above but broken side rail complete.

All as per item No. 8.01 above but broken front/rear rail complete.

M&L for taking out broken/un-serviceable table top of table dining(6 persons) and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and as directed.

TABLE DINING 8 PERSONS(FD-273,239)

M&L for taking out old broken unserviceable leg of table dining and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as per drg and as directed.

All as per item No. 9.01 above but broken side rail complete.

All as per item No. 9.01 above but broken front /rear rail complete.

M&L for taking out broken/un-serviceable table top of table dining (8 persons) and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and as directed.

TABLE 3’X2’ WITH/WITHOUT DRAWER(FD-283,284,55,209,231)

Taking out old broken unserviceable leg of table 3’X2’ with/without drawer and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No.10.01 above but broken side rail.

All as per item No.10.01 above but broken front/rear rail.

All as per item No.10.01 above but broken side stiffener.

All as per item No.10.01 above but broken center stiffener.

M&L for taking out old broken/un-serviceable table top of table 3’X2’ with/without drawer and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and as directed.

TABLE DRESSING LADIES(FD-251,378)

M&L for taking out old broken looking mirror of table dressing ladies and supply & fixing new looking mirror 5 mm thick of suitable size complete all as per drg and directed.(Float glass Make:-Modi Guard/Saint Gobain)

M&L for taking out old broken sliding glass shutter of table dressing ladies and supply & fixing new sliding glass 3 mm thick of suitable size all as per drg and as directed.

TABLE DRESSING GENTS(FD-31, 230, 278)

M&L for taking out old broken looking mirror of table dressing gents and supply & fixing new looking mirror 5 mm thick of suitable size (Make:-Modi Guard/Saint Gobain) complete all as per drg and as directed.

M&L for taking out old broken/un-serviceable side of looking mirror gents(box) and supply & fixing new side of suitable size made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side complete all as per drg and directed.

All as per item No.12.02 above but broken back of suitable size made of 12 mm thick commercial ply wood complete.

TABLE BED SIDE(FD-28,248, 276, 210)

M&L for taking out old broken/un-serviceable side of table bed side and supply & fixing new side of suitable size made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side and bottom shall be covered with 3mmX 18mm size teak wood beading fixed with panel pins complete all as per drg and as directed.

All as per item No. 13.01 above but broken top of suitable size complete.

M&L for taking out old unserviceable/broken center/bottom shelf of table bed side and supply and fixing new center /bottom shelf of suitable size, made out of 12 mm thick pre- laminated particle board bonded with formaldehyde synthetic resin, exterior grade, one side with approved shade & balancing white lamination on other side complete all as per drg and as directed.

M&L for taking out old unserviceable/broken back of table bed side and supply & fixing new back made out of 6 mm thick commercial grade plywood of suitable size complete all as per drg and as directed.

TABLE WRITING(FD-249, 33. 275 )

M&L for taking out old broken unserviceable leg of table writing and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as per drg and as directed.

All as per item No.14.01 above but broken side stiffener complete.

All as per item No.14.01 above but broken center stiffener complete.

M&L for taking out broken/un-serviceable box of table writing and supply & fixing new box of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins and back of box should be 6 mm ply duly given a coat of high gloss French polish complete all as per drg and as directed.

M&L for taking out broken/un-serviceable table top of table writing and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and as directed.

SOFA SET 4/5 SEATER(FD- 281& 373)

M&L for taking out old broken/unserviceable arm of sofa set 5 seater and supply & fixing new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete all as per drg and as directed.

All as per item No. 15.01 above but broken front leg complete.

All as per item No. 15.01 above but broken rear leg complete.

All as per item No. 15.01 above but broken rail of single seater complete.

All as per item No. 15.01 above but broken long rail of long pieces 3 seater complete.

M & L for removing old unserviceable foam cushion along with tapestry cloth of existing sofa set and supply & providing new 100 mm thick foam cushion, 32 density, size 520 x 560 mm duly covered with long cloth and leatherised rexin cloth /tapestry cloth not more than @ Rs 350 of approved quality complete all as per drg and as directed by engr in-charge. MAKE : Sleepwell / Kurlon

SIDE BOARD FD-241

M&L for taking out old broken unserviceable leg of side board and supply & fixing new suitable leg made of Ist class hard wood (MP teak) of suitable size including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surfaces complete all as per drg and as directed.

All as per item No 16.01 above but front and rear long stiffener complete.

All as per item No 16.01 above but side stiffener complete.

M&L for taking out old unserviceable /broken back ply of side board and supply & fixing new back made out of 6 mm thick commercial grade ply wood of suitable size complete all as per drg and as directed.

M&L for taking out broken/unserviceable top of side board and in lieu of supply & fixing new top of side board suitable size, made of 18 mm thick pre-laminated particle board and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high class french polish complete all as per drg and as directed.

All as per item No 16.01 above but sides complete.

All as per item No 16.01 above but shutter complete.

TABLE 3'X3' (FD-291)

Taking out old broken unserviceable leg of table 3’X3’ and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No.17.01 above but broken side rail.

All as per item No.17.01 above but broken front/rear rail.

M&L for taking out old broken/un-serviceable table top of table 3’X3’ and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and as directed.

M&L for taking out old caning from existing wooden furniture(any type) and supply & re-caning with white plastic cane 2 mm wide, oval shape (half round) as per Godrej pattern complete all as per drg and directed.

POLISHING TO WOODEN FURNITURE.

M & L for preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfaces with sand paper, removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surface with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish as per manufacturers instructions till glossy finish is achieved for the following furniture items complete all as directed :-

Bed plywood top (FD-246, 247).

Chair dining (FD-16, 279, 228, 203)

Chair Writing (FD-250, 280)

Chair easy (FD-201, 229).

Stool dressing CB.

Sofa Set Four Seater

Sofa Set Five Seater

Table peg (FD-25, 236, 277).

Table Centre

Teapoy

Table Dining 6 Persons

Table Dining 8 Persons

Table 3’x2’ with drawer/without drawer (FD-283, 284, 55, 209 & 231).

Table dressing ladies (FD-251 & 378).

Table dressing gents (FD-31, 230 & 278).

Table bed side (FD-241).

Table writing

Side board (FD-241)

Hat Stand (FD-362).

Table 3'x3'

Book Case wooden

M&L for preparation of old painted iron & steel surfaces (externally and internally including shelves etc) by scraping & rubbing down with sand paper, removing dents and scratches, if any and filing the same with paste filler and applying a coat of olive green synthetic enamel paint to the following furniture items complete all as per drg:-

Almirah steel. large with shelves (FD-67(M), 351, 1031)

Almirah Steel Medium with shelves (FD-67(M), 243, 350, 1032)

Locker steel.

Table 3x2 steel with drawer/without drawer (FD-1007, 1008)

Rack Steel Adj enclosed type 6 tier

Almirah large steel 1/2h 1/2 sh one side mirror

ALMIRAH STEEL LARGE FD-67 (M)/351/1031

Taking out unserviceable broken leg from almirah steel large and supply & fixing new leg made out of plain back iron sheet 1mm thick of suitable size and welded including applying two coats of spray paints with olive green synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Taking out old unserviceable lock without damaging the adjacent parts of almirah and supply & fixing new MS lock Godrej/link (Including duplicate keys of stainless steel of size 65mm to Almirah large steel complete all as shown on drawing.

Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as shown on drawing.

Supply and fixing steel almirah cover (for locking system) made out of 1mm thick MS sheet to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS screws including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Dismantling carefully and taking out old unserviciable/damaged shelf of almirah large steel and supply & fixed of new shelf made out of MS sheet 1mm thick band to required shape & size and welding the same properly in position including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing.

Dismantling carefully and taking out unserviciable/damaged door single leaf of Almirah large steel and supply and fixining new door single leaf made out of MS sheet 1mm thick to the required shape and size and applining two coats of spray paints internally and externally with synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing.

Taking out old unserviceable mirror without damaging the adjacent parts of almirah and supply & fixing new mirror Modiguard of size 5mm thick to Almirah large steel complete all as shown on drawing.

Taking out old unserviceable hanging pipe without damaging the adjacent parts of almirah and supply & fixing newhanging pipe 20mm dia steel to Almirah large steel complete all as shown on drawing.

ALMIRAH STEEL MEDIUM FD-67 (M)/243/350/1032

Taking out unserviceable broken leg from almirah steel medium and supply & fixing new leg made out of plain back iron sheet1mm thick of suitable size and welded including applining two coats of spray paints with olive green synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing.

Taking out old unserviceable lock without damaging the adjacent parts of almirah and supply & fixing new MS lock Godrej/link (Including duplicate keys of stainless steel of size 65mm to almirah steel medium complete all as shown on drawing.

Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as shown on drawing.

Supply and fixing steel almirah cover (for locking system) made out of 1mm thick MS sheet to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS screws including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Dismantling carefully and taking out old unserviciable/damaged shelf of almirah steel medium and supply & fixed of new shelf made out of MS sheet 1mm thick band to required shape & size and welding the same properly in position including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Dismantling carefully and taking out unserviciable/damaged door single leaf of almirah steel medium and supply and fixining new door single leaf made out of MS sheet 1mm thick to the required shape and size and applining two coats of spray paints internally and externally with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

CHAIR VERANDAH STEEL (FD-19/256)

Removing of unserviciable/torn nylon newar/ plastic cane/PVC Shoes from existing chair and supply & recanning with new plastic cane 4mm wide 1/2 round of approved quality all as directed irrespective of what is shown on drawing including painting the frame with one coat of white synthetic enamel paint before recanning including S & F PVC shoes to the legs comlete all as directed and rest all as per drawing.

TABLE (3' X 2') WITH DRAWER & WITHOUT DRAWER (FD-1007/1008)

Removing of old/broken table top and supply & fixing new table top of suitable size, made out of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm x 18 mm size fixed with fevicol and panel pins and duly given a coat of high glossy french polish and applying one coat of OG synthetic enamel paint on the steel frame complete and rest all as per drawing.

Removing of old broken drawer from existing table 3’x2’ and providing new steel drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer as directed and shown on drawing.

Removing the existing unserviceable lock from the drawer of table and supply & fixing new brass lock, with duplicate keys complete.

TABLE OFFICE CLERK STEEL (FD-84 (M)/1004)

Removing of old/broken table top and supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish complete as per drg.

Removing of old broken drawer from existing table office clerk steel and providing new steel drawer made out of 1mm thick PBI sheet duly painted one coat with synthetic enemal paint over one coat primer as directed by Engr-in-Charge and rest all as per drawing.

Removing the existing unserviceable lock from the drawer of table and supply & fixing new brass lock with duplicate keys complete and rest all as per drawing.

TEAPOY VERANDAH (FD-255)

Removing of old/broken table top and supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade-I , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish complete and rest all as per drawing.

Preparation of old steel surface of teapoy verandah and welding loose joints, if any including de-rusting the surface and painting with one coat of white synthetic enameled paint as directed by Engineer-in-Charge.

TABLE COMPUTER

Removing of old/broken table top and supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish complete as per drg.

Removing of old broken drawer from existing table computer and providing new 18mm thick pre laminated particle board drawer should 75mm deep on telescopic channel as directed by Engr-in-Charge and rest all as per drawing.

Removing of old broken key board from existing table computer and providing new 18mm thick pre laminated particle board key board tray on telescopic channel as directed by Engr-in-Charge and rest all as per drawing.18mm thick prelaminated particle board .

Preparation of old steel surface of table computer and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enameled paint as directed by Engineer-in-Charge.

All steel and iron surfaces exposed to view when placed in position shall be given two coats of automotive paint over a coat of primer after preparation of surfaces to obtain smooth painted surfaces.

LOCKER STEEL(FD-257/1029)

Taking out unserviceable broken leg from Locker steel and supply & fixing new leg made out of plain black iron sheet 1mm thick of suitable size including applying a coat of red oxide primer and one coat of synthetic enamel paint after preparation of surface complete and rest all as per drawing.

Dismantling/Taking down old unserviceable hasp and staple without damaging the adjacent parts of locker and supply & fixing new mild steel chromium plated hasp and staple 100mm size complete all as specified and rest all as per drawing.

Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new mild steel chromium plated handles 100 mm long of approved quality complete all as shown on drawing.

Taking out old unserviceable broken hinges of shutters without damaging the adjacent parts of locker and supply & fixing new MS hinges of 75 mm long of approved quality complete and rest all as per drawing.

CHAIR COMPUTER

Taking out old unserviceable broken seat & back from chair computer without damaging the adjacent parts of chair computer and supply & fixing new seat & back shall be approved quality complete all as shown on drawing.

Taking out old unserviceable broken pedestal from chair computer without damaging the adjacent parts of chair computer and supply & fixing new pedestal shall be approved quality complete all as shown on drawing. .

Taking out old unserviceable broken handale from chair computer without damaging the adjacent parts of chair computer and supply & fixing new handal shall be approved quality complete all as shown on drawing..

Taking out old unserviceable broken Twin wheel castors from chair computer without damaging the adjacent parts of chair computer and supply & fixing new Twin wheel castors are also fitted in the pedestal accessories. shall be approved quality complete all as shown on drawing..

Taking out old unserviceable broken hydrolic up and down from chair computer without damaging the adjacent parts of chair computer and supply & fixing new hydrolic up and down of approved quality complete all as shown on drawing.

Charpoy GI Ply top- FD-220

Taking out old unserviceable broken ply of charpoy GI and supply & fixing 12mm thick commercial ISI Marked ply wood with 10 Nos of nut and bolt with washer over GI Charpoy all as specified and directed by Engineer-in-Charge.

Replacement of existing damaged broken long rails from charpoy GI pipe and cutting and threading the same as one short rail and one leg and provision of two Nos of FI Clamps of size 25x3mm to each leg and treated with two coats of black paint over one coat of red oxide primer and fixing in the existing charpoys including fixing of elbow GI 32mm 3 way (ISI Marked) wherever required complete all as specified and directed by Engineer-in-Charge.

Converting retrieved damaged long rail into one short rails & one leg from each long rail and making thread as per drg and replacing the unserviceable short rail/leg with converted rail/leg of Charpoy GI Pipe including supply & fixing MS clamp for MNF Set and welding 3mm thick MS plain black sheet, 40mm dia round shape of suitable size to 32mm bore at the bottom of leg as specified and shown on drg.

Converting legs of charpoy GI pipe from retrieved damaged short rail (one from each short rail) and making thread as per drg and replacing the unserviceable legs with converted serviceable leg of Charpoy GI Pipe including supply & fixing MS clamp for MNF Set and welding 3mm thick MS plain black sheet, 40mm dia round shape of suitable size to 32mm bore at the bottom of leg complete as specified and shown on drg.

Removing existing unserviceable 32 mm dia 3 way elbow of charpoy GI Pipe and supply and fixing only new 32 mm 3 way elbows ISI marked to GI charpoy complete as specified and shown on drg.

Removing existing unserviceable check nut 32mm dia GI from charpoy GI Pipe and supply and fixing only new check nut 32mm GI ISI marked in position as specified and shown on drg.

Removing of old unserviceable stiffner and S&F new stiffner made of 35x5mm flat iron 900mm long made to shape shall be welded in frame for fixing of plywood shall be provided as per sample and all as directed by Engineer-in-charge

M/S SAROJ KUMAR SINGH