PROVISION OF CERTAIN SANCTIONED (MINOR / CAPITAL) B/R AND E/M WORKS AT CHAF BANGALORE

Amount

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Demoltion of Brickwork or stone/boulder masonry, laid in cement mortar

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil

M & L Cement concrete 1:4:8 Type D2 in foundations, filling and mass concrete in foundation

M & L Pre-cast cement concrete block 1:3:6 Type C1 masonry with solid blocks, exc. 10 cm in width and setting in mortar, cm 1:6 complete

M &L Rendering 15 mm thick cm 1;6 on fair faces of brick work or concrete surfaces finished even and and smooth without using extra cement

M &L Rendering 15 mm thick cm 1:4 on fair faces of brick work or concrete surfaces finished even and and smooth without using extra cement

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc for fair finished sutfaces

M & L Formwork to chullah hoods, chajjas, troughs and similar items including edges

M L precast cement concrete 1:2:4 Type B1 in landing,cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1;6

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L Mild steel bars 5 mm dia and over, upto and including 10 mm dia as in stirrups,spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L RCC 1;2:4 type B1 for chajjas

M & L RCC 1;2:4 type B1 for Beams, cantilevers, bressummers, lintels over 1.5m span

M & L 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.including 15 mm CM 1:6 bedding

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including one shop coat of primer.

S & F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M & L for Powder coated Aluminium sliding windows of three tracks outer frame top, side sections, bottom frame(track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh(total 3 nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40X18X1.5mm inculding glass 4 mm thick and aluminium wire cloth, 0.45mm nominal dia wire and average width of aperture 1.40mm complete all as specfied and dierected by Eng-in -Charge

S & F powder coated Aluminium anodised grill including U type channel all around and accessories etc complete( Make- Jindal)

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified ( Minimum thickness of powder coating 50 micron)

S & F powder coated Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F 9 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty

S & F 5.50 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

S & F 100 mm long brass mortice lock,2 lever vertical type

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M & L Sand filling under floors or in foundations including watering and consolidation

M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M & L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregates) as in sub base of PCC floor

M & L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5 mm graded aggregates) as in under floor finishing the the surface even and rough for receiving floor finish

M & L for 75 mm thick Cement concrete type C- 1,1:3:6 (20 mm graded aggregates) as in plinth protection.

M&L for joint free Non Skid ceramic tiles coloured of sizeexc 0.18 sqm but nexc 0.38 sqm and7 to 8mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles including 15mm screed bed 1:6 for laying floor finishes complete all as specifiedc and as directed.

M&L for glazed ceramic tiles coloured of Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles complete all as specifiedc and as directed including 10 mm thick rendering 1:4 for laying wall finishes complete all as specified and as directed.

M & L for 8 to 9 mm thick prepainted gypsum building boards of size 595 mmx595 mm PVC laminated at back side of board insulation and accoustic purpose flat in ceiling fixed or laid/including powder coated GI snap grid of size 605x605 mm frame work using 36.5x23.50x1.5 mm main Tee,23.50x23.50x1.5 mm cross Tee and 25x25x1.5 mm angles for false ceiling with screws fixed to false ceiling includin hangers 4mm dia upto 1200 mm length adjusting level fixed to roof roof slab/ hangers grids by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specifiedc and as directed ( Note:- Rates inclusive of scaffolding and and necessary arrangements )

S& F PVC (SWR) pipes single socketed 110 mm in any length with rubber ring joints fixed to walls

S & F PVC (SWR) bends 110 mm dia any radius

M & L Preparing surfaces new plastered on wall and applying two coats of oil bound distemper pver a coat of chalk whitening on plastered surfaces including preparation of surfaces

M & L Preparing surfaces new plastered on wall and applying two coats of cement base paint.including preparation of surfaces

M & L two coats of synthetic enamel paint overa coat of red oxide primer on Surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of surfaces

M & L Preparing surfaces on ceiling and applying three coats of white wash including preparation of surfaces

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. thick in any type of soil

Removing excavated material exc. 50m and nexc 5 Km and depositing where directed at a level n exc. 1.5 m

M & L stainless steel tubes/sections SS 304 grade, as in posts,railings,etc fixed in position complete all as specified and directed

M & L 25 mm thick cement cncrete 1:2:4 type B-0 Damp proof course to horizontal or vertical surfaces including necessary formwork

M&L for rendering 15mm thick on external brick masonry surfaces or surfaces fair faces of brick work or on one side of lathing in cement mortar 1:4 (5 mm) and 1:6 (10 mm) and finished fair and even without using extra cement with using WPC(WPC Paid and measured separately)

Preparing newly plastered surfaces of walls and applying three coats of white wash.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe-290( Gde E-165)).

M & L for 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra cement.

M & L for rolling and consolidating formation surfaces in cutting ground by hand roller 0.2 to 0.5 tonne

Excavating in post holes (or similar holes) each n exc 0.5 Cu.m, getting out, returning, filling in and ramming earth brokren rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil

Material and labour cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in lintels upto 1.50 m span ,cills and other similar bands, plinth courses ,parapets,coping bed blocks and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work etc complete all as specified and as directed

Taking down collapsible gate any description and size

Taking down steel windows/ ventilators any size and description

Taking down Aluminium door including fixed glass/ panel portion and description

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantling any type Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets any

M&L for coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cm bed 1:6 for laying floor finishes complete all as specifiedc and as directed.

M & L Preparing surfaces new plastered on wall and applying two coats of oil bound distemper over 3 mm thich wall putty on plastered surfaces including preparation of surfaces

Providing pigeon holder containers for storing Dialyzers, Made of 8 mm thick white coloured sun board for frame work.140 mm dia 4 kg psl,grey coloured PVC pipe for pigeon holders and PVC covers Each unit having 12 Nos pigeon holders

M & L Block boards, 18 to 19 mm thick grade 2 quality, interior grade, decorative type with decorative face veneer on two face, all as specified & directed by Engr-in-charge.

M & L Block boards, 12 mm thick grade 2 quality, interior grade, decorative type with decorative face veneer on one face, all as specified & directed by Engr-in-charge.

S & F aluminium channel with PVC roller for sliding arrangement of cupboard shutter all as necessary and as specified & directed by Engr-in-charge.

M & L second class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads.exc 13 sqcm but n exc 25 sqcm

S & F 6 mm thick teak wood lipping, fixed with nails on external edges of 18/19 mm block board

S & F 6 mm thick teak wood lipping, fixed with nails on external edges of 12 mm block board

S & F 125mm Extruded aluminium alloy handles, fabricated type, anodised cup board shutter all as specified & directed by Engr-in-charge.

S&F sink satin finish of make - Crocodile model No KCW 26031820 or equivalent including brackets , including waste pipe and waste coupling suitable for same

Elbow operated pillar tap casr copper alloychromium plated screwed for iron pipe 15mm bore, fixed as in repairs, completed all as specified and directed Make Cat No. 2320009 of ARK or equivalent model in jaquar

Supply and fix 18/19mm prelaminated particle baord, interior grade prelaminated both sides with decorative choice laminations.

M&L 2nd class hard wood palin fillets. Square, rectangular or triangular, exc 6 Sqcm & n.exc 13sqcm in section, clean sawn. Secured with screws.

S&F 40 mm continous (piano) hinges, mild steel, bright finish or electrogalvanised.

S&F 150m long extruded Auminium allory handles, fabricated type, analdised.

Taking down carefully copper/aluminium point wiring (light,fan, socket or power ) complete including its connected fitting/fixtures (ie holder, bulk head fittings, ceiling roses, fan regulators, switch , switch socket combination, FTL fitting, ceiling fans etc) and making good disturbed surfaces of wall roof etc complete all as specified and directed.

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC conduit/casing capping of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated hylam sheet top cover for housing switches, sockets, regulators etc. complete for one light/ fan/bell point controlled by one single pole 5 amps switch all as specified and as directed.

(a)One light point controlled by one single pole 5 Amps switch

(b)One fan point controlled by one single pole 5 Amps switch

(c )One switch socket out let point 5 Amps on same board with other switches

(d)One switch socket out let point 5 Amps on independent board

Supply and fixing inreplacement Piano type switch single pole 5 Amps one way 230 volts all as specified and as directed

Supply and fix inreplacement socket outlet 5 pin, 5 Amps, flush type, universal complete all as specified and directed.

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 2.5 sq mm nominal area, passing through heavy grade PVC casing/capping conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall , covered with 3mm thick electroplated hylam sheet top cover for housing 15 A switches, 15A sockets all as specified and as directed.

Supply and fixing inreplacement switch 15A flush type universal pattern 230 v all as specified and as directed

Supply and fixing inreplacement socket outlet 5 pin multi purpose 5/15 Amps flush type all as specified and as directed

Supply and fix ceiling rose surface bakelite 65x25mm, two to three termimals complete all as specified and directed.

M&L for UPVC DLP trunking for cabling 50X80 mm with 45mm cover cat 6 flat angles and Tees of Main carrier , straight cover and curved cover supprorts with 45mm deep back boxes with flexible end caps,socket spacer, internal and external corners ,screw fixing kit ,joint cover including fixing on wall properly complete all as specified and directed Make Legrand /Schneider/ Honeywell Prestige 3D

M&L for 4 module mounting box for UPVC trunking system complete all as specified and directed

M&L for 6 module mounting box for UPVC trunking system complete all as specified and directed

S& F modular white cover plate with frame 4 module all as specified and directed

S& F modular white cover plate with frame 6 module all as specified and directed

Supply and fixing of modular type switch single pole 6 Amps one module 230 volts all as specified and as directed

Supply and fixing of modular socket outlet 5pin multi purpose 6 Amps 2 module all as specified and as directed

Supply and fixing of modular type switch 16 Amps one module 230 volts all as specified and as directed

Supply and fixing of modular socket outlet 5 pin multi purpose 16 Amps two module all as specified and as directed

Labour only shifting of Wall mounting fan 230V of size 450mm 2000 RPM , 95 CMM as per user requirement all as spcified and directed. Make: Havells platina HS/Orient/ Crompton/ Bajaj

Supply and fixing exhaust fan 300mm sweep working in AC single phase 900 RPM with louver shutter on wall with necessary fitting,bolt,nutsand washer connecting up with ceiling rose with 3 core flexible cable including necessary arrangement for making hole on stone wall and holding frame etc all as directed.Make Havells Model Turbojet SP or equivalent in Bajaj/Orient

Supply and fixing inreplacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed.

Supply and fixing inreplacement LED light fitting, 36 Watt Suspended approx 2 mtr down linear in sleek design is suitable for all comercial spaces with polycarbonate diffuser & integrated electronic driver. including connecting up with twin core flexible copper conductor cable with suitable size all as specified and as directed. Make :CROMPTON GREAVES Model LCLP54-36-CDL or equivalent model in HAVELLS/PHILIPS/WIPRO

Supply and fixing inreplacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

M & L inreplacement sub main wiring with Two single core PVC insulated cable with copper conductor FRLS multistranded 1100 volts grade 2x4sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 4 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

All as per serial item No 23 above but for 2x6 sqmm copper conductor cable 6 sqmm pvc insulated unsheathed copper earth continuity conductor.

Supply and laying inreplacement sub main wiring with four single core PVC insulated cable with copper conductor multistranded 1100 volts grade 10 sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 10 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed.. Note : One run of earth continuity conductor and four run of copper conductor together taken as one length for measuring unit length.

Supply and fix inreplacement sheet metal enclosure double door type for DBs for mounting of MCB for 240V, 8 way with 200 Amps rated Bus bar, single pole & neutral, fixed in repairs complete all as specified and directed.

Supply & fixing inreplacement sheet metal enclosure MCB DB double door type 230v with 12 ways SPN suitable bus bar model inrepalcement of old unserviceable DB all as specified and directed

Supply & fixing inreplacement sheet metal enclosure MCB DB double door type 230v with 4 ways TPN suitable bus bar model inrepalcement of old unserviceable DB all as specified and directed

S & F in replacement of old u/s MCB TPN of 63A,'C' curve, 10KA rupturing capacity all as specified and as directed.

Supply and fix inreplacement miniature circuit breaker (MCBs) SPN, 240 volts, 10KA, 6 to 32 Amps c series complete all as specified and directed.

Supply and fix inreplacement miniature circuit breaker (MCBs) single pole, 240 volts, 10KA, 6 to 32 Amps C series complete all as specified and directed.

Supply and fix inreplacement distribution board Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) double door vertical SUITABLE FOR TP/FP ‘G FRAME’ MCCB complete all as specified and directed. Make: Havells Cat No DHDLVDRWGOFO04 or equivalent model in ABB/Scneider.

Supply and fix inreplacement MCCB 100 Amps fixed thermal fixed magnetic setting, 430 volts, 16KA,3 pole complete all as specified and directed.

Material and labour inreplacement earthing complete with galvanised steel earth plate electrode 600mm x 600mm x6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge earth plate at a depth not less that 1.5m below normal ground level connected to galvanised steel earth lead wire, 4mm dia by means of bolts, nuts, check nuts and washewrs of galvanised steel and connected to mainswitch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre- cast RCC (1:2:4) type B1 cover slab 54 cmx54cmx 5cm with one handle for lifting make out of 8mm dia MS bar, provision of funnel, wire mesh, 20mm bore galvanised steel tubing (med grade) for watering charcoal or coke and salt in alternate layers, 15mm bore galvanised steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR part-I.

Supply and fixing inreplacement electronic fan regulator socketed step type upto 100 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm. make : Anchor/Crompton greevs all as specified and as directed

Supply and install air cooled split type Air conditioner electric driven single phase 50 HZ,with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum copper condensor inverter type and ISEER not less than 4.5 .of capacity as 1.5 Ton complete by indoor unit on wall of room and out door unit out side exposed to open space on surface with suitable foundation or wall with proper fixer including insulating all the refriferent piping and free 3 mtr pipe complete all as specified and directed .Make:- Voltas Model No SAC -185V-JZJ-R32 or equivalent “Carrier, Bluestar, Daikin, Hitachi, LG, Samsung, Fedders Lloyd, Godrej”.

Supply and fix voltage stabilizer for automatic operation single phase naturaly air coooled indoor operation and design for input variation 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of + 2.5% and of capacity 4KVA connected with existing point all as specified and directed . Make: V GuardVWR400/ Sinetec/Powertec

S&F sheet metal enclosure with a two pin and earth plug and socket complete with one SP MCB 20 amps, 240 volts.all as specified and directed

M & L sub main wiring with Two single core PVC insulated cable with copper conductor FRLS multistranded 1100 volts grade 2x4sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 4 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

Labour only for taking down and refixing air cooled split type Air conditioner electric driven single phase of capacity as 1.5 Ton complete by indoor unit on wall of room and out door unit out side including insulation with all the refriferent piping complete all as specified and directed

Labour only for taking down and refixing voltage stabilizer 170 volts to 250 volts with output voltage stabilized at 230 volts of capacity 4 KVA all as specified and directed .

S & F Copper tube, 15 mm / 18 mm dia, superior quality suitable for refrigeration and suction lines of split ACs, drawn through pipes/ fixed to walls/ laid on floor or roof with insulation all as specified and as directed

S & F Copper tube, 9 mm dia, superior quality suitable for refrigeration and discharge lines of split ACs, drawn trough pipes/ fixed to walls/ laid on floor or roof with insulation all as specified and as directed.

M&L for Refrigerant gas,(R 32) suitable for cooling equipments supplied and filled all as specified and as directed.

Supply installation and testing water heater storage type single phase 230 volt 50 ltrs capacity and grouting 4 nos nut & bolts 90 mm long 12mm dia on wall for fixing complete all as specified and directed.

Supply and fix GI pipe 15mm dia medium grade with all fittings and fixed complete to wall and ceiling or Laid in trenches including drill hole on wall for out going connections from the geyser all as specified

S&F bib taps cast copper alloy with clutch or butterfly handle screwed for GI pipe 15mm dia chromium plated fancy type.

Cutting existing steel tubing for alteration or additions all as specification and directed.

S&F PVC connections 15mm size with PTMT nut of length 300mm complete all as specified and directed.

S&F Stopcock cromium plated screwed down High pressure with crutch or butterfly handleb screwed both ends for iron pipe or for union completebib taps cast copper alloy with clutch or butterfly handle screwed for GI pipe 15mm dia complete

S&F sheet metal enclosure with a two pin and earth plug and socket complete with one SPN MCB 20 amps, 240 volts.

M & L Point wiring concealed type complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated hylam sheet top cover for housing switches, sockets, regulators etc. complete for one light/ fan/bell point controlled by one single pole 5 amps switch all as specified and as directed.

(a)One light point controlled by one single pole 5 Amps switch

(b)One fan point controlled by one single pole 5 Amps switch

(c )One switch socket out let point 5 Amps on same board with other switches

(d)One switch socket out let point 5 Amps on independent board

M & L Point wiring concealed type complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 2.5 sq mm nominal area, passing through heavy grade PVC conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall , covered with 3mm thick electroplated hylam sheet top cover for housing 15 A switches, 15A sockets all as specified and as directed.

Supply & fix ceiling fan complete and with all accessories including rod of required length except fan regulator 230 V,1200 mm sweep. BEE 5 star rated Make Orient,Crompton, Bajaj, Havells ES NEO

M.VENKATARAMANAPPA AND COMPANY

Sri Vijalakshmi Constructions