REPAIR TO LEAKAGE / SEEPAGE IN ROOF, CHAJJA, BALCONIES AND WALLS ETC AND MISC REPAIR WORKS TO CERTAIN BLDG IN MES AREA AND REPAIR / REPLACEMENT OF STREET LIGHT, OH CONDUCTOR, DBs IN MES AND NCs QTRS AND LIVING IN AREA UNDER GE (AF) HASIMARA

Amount

SCHEDULE 'A' PART-I Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m as directed by the Engr-in-Charge.

Demolition of reinforced cement concrete in any position not otherwise specifically provided for complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any position exceeding 15 cm thickness above ground floor, etc complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed.

M & L Water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein below and as directed:- (a) Taking down existing old tarfelt, bituminous compound including cleaning, picking, sweeping and washing down with water and brushing with neat cement slurry & 3 Kg per Sqm & removing debris to a distance exc 100m & n.exc.250m. (b) 15 mm thick plastering in cement mortar 1:3 mixed with water proofing compound (to be measured seperately) as per manufacturer instructions finished even & smooth. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 300 ml per sqm conforming IS-3384 (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm

Dismantling of Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings with ridges complete all as specified and directed.

S & F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer's instruction complete all as specified and directed.

S & F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/vally gutter, fixed with self tapping screws as per manufacturer's instruction complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

Material and labour for 25 mm thick pre-polished cement concrete chequered tiles, glossy finish , smooth in design , compressive strength 300 kg/Sqcm, ISI marking (IS-13801-1993), set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over and including 20mm thick scread bed in cement mortar 1:6 complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L for joint free non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

S & F in repairs, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers, etc as in curtain rail complete all as specified and directed.

Taking up or down 15mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

S & F in repairs, 20 mm bore, gun metal Gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Dismantling cast iron, PVC or reinforced concrete drain pipes, etc upto 110mm bore, with fittings jointed in cement mortar and taking out of trenches, floor or walls if required complete all as specified and directed.

S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed.

S & F in repair 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repairs, 75 mm bore, Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F in repairs, cast iron nahani trap 75 mm dia with grating including jointing to waste pipe fixed in cement mortar 1:2:4 type B2 using 20mm graded aggregate complete all as specified and as directed..

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S & F in repair 15 mm bore, fancy type health faucet, ABS with chromium plated flexible tube and hook and with all accessories complete all as specified and directed. (Make: Crabtree Cat No. BACP07212 or equivelant of make as per list of manufacturer's)

S & F in repair Grating doom 125mm dia of PTMT (Minimum weight 40gms) complete all as specified and directed.

S & F in repair 15 mm bore, angular stop valve, cast copper alloy, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Hindware Cat No. F190003 or equivelant of make as per list of manufacturer's)

S & F in repair 15 mm bore, consealed stop cock with adjustable wall flange, cast copper alloy, chromium plated, fancy type, long shank type for iron pipe or for brass ferrule complete all as specified and directed. (Make: Hindware Cat No. F190004 or equivelant of make as per list of manufacturer's)

S & F in repairs, 15mm bore, hulf turn bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs, towel rack, 18 inch, brass chromium plated including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: ESSCO Cat No. AEC-1181A or equivelant make as per list of manufacturer's)

S & F in repairs, Toilet paper holder with cover, brass, chromium plated fixed to wall with brass screw complete all as specified and directed. (Make: Hindware Cat No. F840009 or equivelant of approved make)

S & F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S & F MS steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as speicfied and directed.

S & F 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position as specified in SSR Part I and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capapcity exc 500 & n.exc 1000 Ltrs and from mouths of circulating pipes, etc. using bleaching powder and washed with water including dismantling and reconnecting and refixing in psoition including writing date of cleaning with nwhite synthetic enamel paint as "CLEANDED ON" complete all as specified and directed.

S & F 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed.

M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed.

Taking down street light fittings/flood lights of any type any capacity from existing pole after disconnecting all electrical connections and removing from the site complete all as specified and directed.

S & F in repair Street light bracket arm of length not less than 1.2 m made out of GI tubing, 40 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Supply and laying well burnt bricks, sub class 'B' bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.

M & L for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment)

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core including taking out old one complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately)

All as per serial item No. 56 above but for 10 Sqmm 4 core cable complete ditto

All as per serial item No. 56 above but for 16 Sqmm 4 core cable complete ditto

All as per serial item No. 56 above but for 25 Sqmm 3.5 core cable complete ditto

S & F in repairs, powder coated MS box of size 200x200x140mm made out of 1.6 mm thick MS sheet with front openable hinged door, locking arrangement with 2 Nos aluminium bus bar, 200 Amps mounted on porcelain insulator, gland and lugs etc fixed to pole/PTL post, etc with suitable size flat iron clamps, nuts, bolts complete all as specified and directed.

S & F in repairs, powder coated MS box of size 300x250x200mm made out of 1.6 mm thick MS sheet with front openable hinged door, locking arrangement with 4 Nos aluminium bus bar, 200 Amps mounted on porcelain insulator, gland and lugs etc fixed to pole/PTL post, etc with suitable size flat iron clamps, nuts, bolts complete all as specified and directed.

M & L for disconnecting burnt end or portion of UG cable, removing the cable from loop including necessary excavation and earth work, relaying and re-connecting the cable by removing burnt protion of cable and preparing fresh terminals for cable of cross sectional area 10 Sqmm 2 core to 95 Sqmm 3.5 core of LT cable to pole main switch etc complete all as specified and as directed by the Engr-in-Charge.

S & F in repair powder coated street light feeder panel with IP65 protection for outdoor application, modular changeover functions as auto manual bypass of time switch, digital Astro time switch to adjust time, 16 module enclosure, one MCB 4 pole 10 KA capacity 40 Amp, one MCB type change over 25amp, 2P, 250V, one contactor 40A 230V including 4 pole surge protection device including locking arrangement, glands and lugs etc and fixed to pole with nuts bolts washers etc complete all as specified and directed. (Make : Hager/Havell's/Aristo and equivelant model of make as specified in list of manufacturer).

S & F LED street light fittings, 45 Watt in aluminium PDC housing toughened glass cover with IP 66 protection icnluding lamp and connecting up and testing complete all as specified and directed. (Make : Surya Cat No. SLE UL 45W IP66 LXN and equivelant model of make as specified in list of manufacturer).

S & F LED street light fittings, 60 Watt in aluminium PDC housing toughened glass cover with IP 66 protection icnluding lamp and connecting up and testing complete all as specified and directed. (Make : Surya Cat No. SLE UL 60W IP66 LXN and equivelant model of make as specified in list of manufacturer).

S & F energy efficient LED flood light fittings, 75 Watt with pressure die cast aluminium housing with IP 66 protection complete with all accessories including lamp and connecting up and testing complete all as specified and directed. (Make : C & S Cat No. LTEFI75WHPLED and equivelant model of make as specified in list of manufacturer).

S & F LED flood light fittings, 60 Watt with high luminous afficacy with front toughened glass cover with IP 65 protection icnluding lamp and connecting up and testing complete all as specified and directed. (Make : Surya Cat No. SLE FL 60W IP65 RFLOOD and equivelant model of make as specified in list of manufacturer).

S & F LED street light fittings, 30 Watt in aluminium PDC housing toughened glass cover with IP 66 protection icnluding lamp and connecting up and testing complete all as specified and directed. (Make : Surya Cat No. SLE UL 30W IP66 LXN and equivelant model of make as specified in list of manufacturer).

M & L for Preparation of old painted surface above the planting depth/PCC coping of steel tubular LT pole upto 11.00 metre long including MS clamps, cable protection pipe, bracket fitted with steet light fittings etc by scraping with steel wire brush and applying two coats of aluminium paint to external surface of poles, MS cross arms, MS clamp, cable protection pipe etc to give even shade including Zebra colour of painting upto 2.1 m height from the top of coping/bottom of pole as per site condition and numbering of poles complete all as specified and as directed by the Engr-in-Charge. (Note : Zebra colour will be applied by synthetic enamel paint of black/yellow colour as approved in alternate layer of 30 cm height of each layer).

M & L for Writing letters or figures (Block ,Roman, Italic or Indian) n. exc 5 cm height with synthetic enamel paint as in numbering of pole etc complete all as specified and directed.

S & F in repairs, three core twisted, flexible copper conductor wire of size 1.00 Sqmm for connection complete all as specified and directed.

M & L for boring of horizontally holes by manual method under road below 1 metre from the road surface and dia of hole not exc 100mm without damaging the exsting road, getting out and disposal of excavated soil, etc to a distance not exc. 50 meter from the site of work complete all as directed by Engineer in charge.

M & L for making hole by gas flame of appropriate size in street light steel pole (02 Nos per pole) for passing the connection wire etc from junction box to street light complete all as specified and directed.

M & L for 40 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor/road crossing/drain etc as in cable protection complete to walls and ceilings or laid in floors including taking up or down existing pipe complete all as specified and directed.

Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified and directed.

Taking down unserviceable sub-main wiring with rigid steel conduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed.

S & F in repair wall mounted slim LED batten, with extruded aluminium housing, with integrated LED driver with LED lamp, 18 Watt and connecting up complete all as specified and directed. (Make : Surya Cat No. SLE BT 20 and equivelant model of make as specified in list of manufacturer).

S & F in repair LED tube, T8, 18W, environment friendly, enargy saving with aluminium extrusion heat sink for optimum performance with high luminous afficacy complete all as specified and directed. (Make : Surya Cat No. SLE TL-DS 18PC Reform/Bajaj Cat No. BLRB 18W CWC/Cropmton Cat No. LTT8-20 and equivelant model of make as specified in list of manufacturer).

M & L Sub main wiring with two runs of 4 sqmm (Nominal area) single core cable FR PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through and including concealed PVC conduits of suitable size including 4 sqmm (nominal area) single core, FR PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point including PVC conduits of suitable size complete all as specified and as directed by Engineer-in-charge. (Note : (i) PVC Conduits, two run cables and one run of earth wire will be measured as one length. (ii) Cutting chases and making good of the same for concealed wiring shall be measured and paid seperately)

M & L for Sub main wiring with two runs of 6 sqmm (Nominal area) single core cable FR PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through and including concealed PVC conduits/casing-caping of suitable size including 6 sqmm (nominal area) single core, FRLS PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point including PVC conduits/casing-caping of suitable size complete all as specified and as directed by Engineer-in-charge. (Note : (i) PVC Conduits/Casing-caping, two run cables and one run of earth wire will be measured as one length (ii) Cutting chases and making good the same for concealed wiring shall be meaured and paid seperately.)

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but n.exc 20 cm girth complete all as specified and directed.

S & F Factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, SPN, 4 way, 240 Volts suitable for housing MCBs complete all as specified and directed. (Make : Legrand Cat No. 5076 10 or equivalent model as approved)

S & F sheet metal enclosure, double door MCB DBs, phosphatised, powder coated, single pole & neutral (SPN), 08 way, 240 Volts suitable for housing MCBs with din rail, neutral and earth bar in proper psoition complete all as specified and directed. (Make : Legrand, Cat No. 5076 11 or equivalent model as approved)

S & F MCB, SPN, 240 Volts, 6 to 32 Amps, 'C' series, 10KA capacity complete all as specified and directed. (Make: Legrand Cat No. 4086 14 - 17 or equivelant of make as per list of manufacturer)

S & F MCB, 'C' Series, SP, 240 Volts, 5 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and directed. (Make: Legrand, Cat No. 4085 87-95 or equivalent make as per list of manufacturer)

M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge.

CONSTRUCTION SHELTER

M/S DEY ENTERPRISE

M/S BISHAL ENTERPRISES

M/S P K AGARWALA

M/S SARDAR MAL NAHATA

M/S ASHOK ENTERPRISE

M/S RATHIN ENTERPRISES