Construction of compound wall to the properties affected under the Road Development Project from Road No.45 to 51 connecting Road No.70 in Jubliee Hills.

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH - Brick/RR including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge.

Earth work excavation in Ordinary Soil using Mechanical Means and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means - Upto 3M Depth including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge.

Excavation for roadway in hard rock (Blasting Prohibited) with rock breakers including rock breaking, loading in tippers and disposal within all lifts and lead upto 1000m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.

Carting away surplus excavated earth from the work site with a lead of 5.0 KM's beyond the initial lead including loading, unloading and conveyance etc., complete for finished item of the work including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) with hand mixing under foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, including all Operational, Incidental and Labour charges for mixing, laying, Curing of concrete, including overheads and contractors profit charges and excluding Seignorage charges and applicable taxes etc., complete for finished item of work and as directed by engineer-in-charge etc.

Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand (with 50% river sand & 50% manufactured sand), water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc., complete for finished item of work in foundation and basement. (APSS No. 601 & 615) including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge.

Flush Pointing to RR/ CRS Masonry in CM (1:3) (with 50% river sand & 50% manufactured sand) including cost and conveyance of all materials in site, curing, labour charges etc, and overheads & contractors profit, complete for finished item of workincluding contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge.

Plain Cement Concrete corresponding to M-20 grade as per IS 456 nominal mix using 20mm size graded aggregate machine crushed hard granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, all operational, incidental and labour charges such as mixing, laying concrete, curing and cost of including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge., for:-Machine Mix-PCC : M-20 NOMINAL MIX FOR LEVELLING COURSE.

CR stone masonry in 1st sort in CM (1:3) prop: (cement : sand) using hard granite stones from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand) water, granite stones, etc., from approved quarry to site and including labour for cutting stones to required size and shape, mixing of cement, mortar, construction, scaffolding charges, curing etc., and including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge in foundation & basement. (APSS No. 615 & 601)

Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with Casuarinas Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,) , constructing masonry, lift charges, curing including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140)

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 550D grade as per IS 1786-1979 manufactured by GOEL, SHYAM, JAI BALAJI, AFSTAR/MSLIFE TMT. RADHA TMT, SUGNA TMT) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge. ( APSS No.126)

RCC M- 20 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site, including all operational, incidental and labor charges such as machine mixing, laying concrete, curing,including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge for Footing.

RCC M- 20 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site, including all operational, incidental and labor charges such as machine mixing, laying concrete, curing,including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge for RCC Walls.

Plastering 20mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with a base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to the site, including all operational, incidental and labour charges for mixing mortar, finishing, curing, including cutting grooves, cost and conveyance of all materials to work site and all operational, incidental, labour charges, scaffolding charges etc. including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge.( External walls )

Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost ofincluding contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats.

S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour harges complete including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge.

Manufacturing, Supply, Fabrication, Erection and Fixing of Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge including Labour charges for fixing in position power charges, cost and conveyance of all materials. Including lead and lift charges, including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge.

Supply and fixing of Nut & bolts including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge.

Providing cladding with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of premium colours (other than black) in single piece set over a base coat of CM (1:3) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge. (APSS No.701 & 707)

Supply of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge.

Providing Mild Steel, Structural Steel, I.e., Angles, Channels and I sections of different sizes, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing in position, including contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge.

Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades using ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., completeincluding contractor profit and overhead charges but excluding seigenorage charges etc. complete for finished item of work and as directed by the engineer-in-charge. (APSS No.1200, 1207 & 1211) in all floors.