Loading
Loading…
Loading…
Tender Value
₹30.9 Cr
EMD Value
₹30.9 L
Closing Date
11 May 2026, 10:30 pmClosed
Visvesvaraya Jala Nigam Limited
Sreepeeta S Kumbhavath
Construction of 220kV Switching Station for arranging power supply to an extent of 35MVA on EHT Basis on 220KV Voltage class in favour of Executive Engineer Yettinahole Project, Divsion No. 4, Madhugiri for pumping water to Ramanagara, Magadi T G Halli Water reservoirs at Mudalakerepalya village in Kolala Hobli, Koratagere Taluk in Tumkur district under Self Execution scheme by M/s VJNL.
VJNL/2025-26/SS/WORK_INDENT249/CALL-3
VJNL/2025-26/SS/WORK_INDENT249/CALL-3
Open
Sub-Station
Two Tender Document System(Two Cover)
VJNL Division YP NO 4 Office Madhugiri
16 documents required · 16 mandatory
Scanned signature of the bidder / authorized representative in case of a firm or company, to be attached while uploading the bid documents. Also in case of authorized representative, scanned copy of power of attorney should be uploaded.
Tenderer or Bidder should have Satisfactorily Constructed, Completed & Commissioned atleast One No. of 220 kV or above voltage class Sub-Station or Switching Station in the last 05 years OR bidder should have satisfactorily constructed, completed & commissioned not less than two nos (2) 66KV or above voltage class AIS substation Preceding the date of bid submission usually not less than 50% of estimated value of the contract i.e., 1544.82 Lakhs during the Last 5 financial years. from 2021-22 to 2025-26 An additional weightage of 10 percent each year will be added to the cost of work to bring it to the price level FY 2026-27. The work done certificate should be obtained from competent authority not below the rank of Executive Engineer or equivalent in case of Government under taking Note: If the bid submitted as joint venture the one partner of the JV should fully meet the Pre qualification requirement of similar nature of work
The intending bidder should have executed in any one financial year, the following minimum quantities of work in the last 5 financial Years(2021-22 TO 2025-26). The minimum quantities of work OR items. The work done certificate should be obtained from competent authority not below the rank of Executive Engineer or equivalent in case of Government under taking.1.Circuit Breaker :3 NO. 2.CT,PT,CVT,VT:18 NO. 3.Insulators:54 NO. 4. Cement Concrete:3622.40 cum.5. Steel:190.08 tonne. Note: If the bid submitted as joint venture the one partner of the JV should fully meet the Pre qualification requirement
Valid Super grade electrical contractors license issued by Govt of Karnataka.
Copy of the PAN card with GSTIN
Valid Employees Provident Fund Registration Certificate along with latest paid challan copy.
Income Tax returns of last 5 years (FY:2020-21 to 2024-25)
Tenderer should further demonstrate Equipment Capabilities Availability by owning at least 50% of the required / specified key and critical equipment for this work and (b) the remaining 50% can be deployed on lease / hire basis for all works, provided the relevant documents (commitment agreements etc.) for availability for this work are furnished. As per table no.04 of ITT of Bid Document uploaded
To qualify for a package of contracts made up of this and other contracts for which tenders are invited in this IFT, the Tenderer must demonstrate having experience and resources to meet the aggregate of the qualifying criteria for the individual contracts as listed in table No.05 of ITT of bid document uploaded under this tender
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: AXNX1.5-B where A is Maximum value of works executed (VJNL& Non-VJNL) in any one year during the last five years updated to FY 2026 to 27 price level taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited. and B is Value, at FY 2026-2027 price level, of existing commitments (VJNL& Non-VJNL) and on-going works (VJNL& Non-VJNL) to be completed during the next 15 Month
The bidder, JV partners shall not be under corporate Debt Restructuring (CDR)/Strategic Dept Restructuring (SDR) or Bureau of Industrial and Financial reconstruction (BIFR) in the last 5 Years prior to bid Submission date. In this regard, the bidder shall submit along with bid, a certificate from their Statutory Auditor with a declaration that, the bidder, JV partner is not under CDR/SDR or BIFR
Bidder / all members in case of J.V should not have been blacklisted / debarred in any department of Government of Karnataka / Government of India / any other State Government Department as on date of submission of Bid to be eligible to participate in the present bid. In this regard, the Bidder/ all members in case of JV shall submit a declaration along with Bid.
The intending Bidders can submit bids as an individual / Joint Venture. The Joint venture is to be formed prior to the bidding. The lead partner should be a Super grade electrical contractor, have at least 51% partnership and JV partner should be a Super grade electrical contractor/KPWD Class -1 contractor
The bidder should furnish the name of the individual/firm with postal address, E-mail Id and Telephone No. with place of registration, year of incorporation etc
Achieved in at least two financial years in the last five years i.e. FY 2020 to 21 to 2024 to 25 a minimum Financial Turnover of Rs.4943.44 Lakhs note: Updated to the FY in which the tenders are invited. Financial Turnover of previous years shall be given a weight of 10 percent per year to bring them to the price level of the FY in which the tenders are invited i.e, FY 2026 to 27 2.Audited balance sheets, Profit & Loss statement and Turnover certificate duly certified by Chartered accountant with their unique document identification number generated by ICAI portal should be uploaded.Certificate without UDIN will not be accepted.
Liquid Assets and availability of credit facilities of not less than Rs. 1213.00 Lakhs .for the work mentioned above for meeting the required funds in the form of credit lines or line of credit or certificate from Scheduled nationalized Bank
₹7,500
₹30.9 L
2 May 2026
2 May 2026
13 May 2026
6 May 2026
6 May 2026
Construction of 220kV Switching Station for arranging power supply to an extent of 35MVA on EHT Basis on 220KV Voltage class in favour of Executive Engineer Yettinahole Project, Divsion No. 4, Madhugiri for pumping water to Ramanagara, Magadi T G Halli Water reservoirs at Mudalakerepalya village in Kolala Hobli, Koratagere Taluk in Tumkur district under Self Execution scheme by M/s VJNL.
Providing,supplying,Erection and testing & commissioning of SF-6 CIRCUIT BREAKER: SF-6 Circuit Breaker with rigid bi-metallic terminal connector suitable for Drake ACSR with spring / semi-pneumatic / ...
Providing,supplying,Erection and testing & commissioning of 220kV Class Isolators:
220kV, electrically cum manually operated double break type disconnects with solid core insulators, terminal connecto...
Providing,supplying,Erection and testing & commissioning of 220kV Class Isolators:
220kV, electrically cum manually operated double break type disconnects with solid core insulators, terminal connecto...
Providing,supplying,Erection and testing & commissioning of 220kV Class Isolators:
220kV, electrically cum manually operated double break type disconnects with solid core insulators, terminal connecto...
Providing,supplying,Erection and testing & commissioning of 220kV Class Isolators:
220kV, electrically cum manually operated double break type disconnects with solid core insulators, terminal connecto...
Providing,supplying,Erection and testing & commissioning of 220kV Class Isolators:
220kV, electrically cum manually operated double break type disconnects with solid core insulators, terminal connecto...
Providing,supplying,Erection and testing & commissioning of Terminal connector for Isolators:Rigid Type Terminal Connector Suitable for Twin Moose ACSR conductor
Providing,supplying,Erection and testing & commissioning of Terminal connector for Isolators:Rigid Type Terminal Connector Suitable for Moose ACSR conductor
Providing,supplying,Erection and testing & commissioning of Terminal connector for Isolators:Flexible Type Terminal Connector suitable for 63mm Al. Pipe -3"
Providing,supplying,Erection and testing & commissioning of CURRENT TRANSFORMERS: Oil filled Current Transformers with rigid terminal connector suitable for Drake ACSR: 220 kV class, 50 KA, CT of rati...
Providing,supplying,Erection and testing & commissioning of CURRENT TRANSFORMERS: 220 kV class, 50 KA, CT of ratio 1200-800-400-300/ 1-1-1A with additional 2 cores of 1200/1A of Type-1 For metering : ...
Providing,supplying,Erection and testing & commissioning of Voltage Transformer Single Phase, oil filled outdoor type as per Technical Specification- 220KV, VTs of Ratio 220KV/(Sqrt of 3)/110V/(Sqrt o...
Providing,supplying,Erection and testing & commissioning of Capacitor Voltage Transformers - Single Phase, outdoor type as per Technical Specification:245 kV CVT, 4400 PF, 1 Ph CVT with2 secondaries, ...
Providing,supplying,Erection and testing & commissioning of Surge Arresters (Porcelain Housing):198 kV Metal Oxide with surge counterArrestor class : Station Medium Duty (SM) -Discharge Class 3
Providing,supplying,Erection and testing & commissioning of Wave Trap 0.5 mH, 2000 A, 40 kA Ph-Ph Coupling (Pedestal Type)
Providing,supplying,Erection and testing & commissioning of PLCC Terminals (Carrier cabinets) : 40W Carrier cabinets Single Channel
Providing,supplying,Erection and testing & commissioning of Protection couplers 4 commands version
Providing,supplying,Erection and testing & commissioning of Coupling Device with protective device (LMU+LMDU) Coupling Ph/Ph
Providing,supplying,Erection and testing & commissioning of HF Co-axial Cable 75 ohm
Providing,supplying,Erection and testing & commissioning of EPAX for PLCC Trunk/E&M/Line 8/8/16
Providing,supplying and instalation of Push Button Telephone
Providing,supplying,Erection and testing & commissioning of 48 Volts battery charger suitable for 200Ah Battery
Providing,supplying,Erection and testing & commissioning of 48Volts, 200Ah Battery Set
Providing,supplying,Erection and testing & commissioning of Relay & Protection Panels C&R Panels compatible to IEC 61850, communication protocol for Station automation system in 220 kV Sub-stations :2...
Providing,supplying,Erection and testing & commissioning of Relay & Protection Panels-C&R Panels compatible to IEC 61850, communication protocol for Station automation system in 220 kV Sub-stations :2...
Providing,supplying,Erection and testing & commissioning of Relay & Protection Panels-C&R Panels compatible to IEC 61850,communication protocol for Station automation system in 220 kV Sub-stations :22...
Sub-station Automation SystemComplete Sub-station Automation System includinghardware and software for Sub-station and foroperation from remote control centre along withassociated equipment as per Ann...
Providing,supplying,Erection of Station Structure Tower - 2T1 with peak. (1.502+0.076=1.578 MT per tower)
Providing,supplying,Erection of Station Structure Tower - 2T2 without peak. (1.272+0.053=1.325 MT per tower)
Providing,supplying,Erection of Station Structure Tower - 2T2 without peak with 2.5M extension (1.5264+0.0636=1.59 MT per tower) (20% Extra Weight of 2T2 without peak considered for2.5Mtr Extension)
Providing,supplying,Erection of Station Structure beam suitable for fixing underhang isolator - 2B1 (1.631+0.064=1.695MT per beam)
Providing,supplying,Erection of Station Structure beam - 2B2 without underhang isolator (1.112+0.055=1.167 MT per beam)
Providing,supplying,Erection of Lighting/Lightning Mast Structure (2.678+0.1339=2.8119MT Per Structure)
Providing,supplying,Erection of Mounting Structures::220 kV Isolator Live point height 8250 mm .(1.64MT per Structure)")
Providing,supplying,Erection of Mounting Structures::220 kV Isolator Live point height 5750 mm .(0.95MT per Structure)")
Providing,supplying,Erection of Mounting Structures:Current transformer. For 220kV Current transformer & NCT's (0.16+0.01=0.170 MT per Structure)
Providing,supplying,Erection of Mounting Structures:Capacitor Voltage transformer. 220 kV . (0.170+0.01=0.180 MT per Structure)
Providing,supplying,Erection of Mounting Structures:Voltage transformer. 220 kV . (0.170+0.01=0.180 MT per Structure)
Providing,supplying,Erection of Mounting Structures:Suge Arrestors:Lightening Arrestors. 220 kV 198KV . (0.18+0.05=0.185MT per Structure)
Providing,supplying,Erection of Suge Arrestors:Mounting structure for Wave traps 220kV 0.5mH
Providing,supplying,Erection of Mounting Structures:Post Insulators:For Post insulators of Rigid bus 220 kV side. - LPH 5750 (0.1440 MT per Structure)
Providing,supplying,Erection of Rigid bus with taps and clamps:Aluminium Tube Conforming to 63401WP of IS-5082/1969 (BS1600-Sch.40) of following sizes100mm Size - 220KV Side
Providing,supplying of Rigid bus with taps and clamps:Aluminium Tube Conforming to 63401WP of IS-5082/1969 (BS1600-Sch.40) of following sizes63mm Size for connecting isolator to vertical tap - 220KV S...
Providing,supplying of Inverted ‘V’ taps made of 63mm Aluminium Tube (BS-1600) of 2500mm vertical height for vertical portion and cross bus on 220KV Side with rounded off end.
Providing,supplying of Post Insulator Clamp suitable for 100mm Aluminium Tube and post Insulators Solid Core Type.220KV Side-Rigid Type
Providing,supplying of Post Insulator Clamp suitable for 100mm Aluminium Tube and post Insulators Solid Core Type.220KV Side-Expansion Type.
Providing,supplying of Corona Bell Suitable for Aluminium Pipe of Size-100mm on 220KV Side
Providing,supplying of Corona Bell Suitable for Aluminium Pipe of Size-End cap Suitable for Aluminium Pipe of Size 63mm
Providing,supplying,Erection and testing & commissioning of ACSR Conductor-Moose ACSR - 220KV Side
Providing,supplying,Erection and testing & commissioning of Busbar Formation-Main bus/cross bus (all the three phases in a segment) using Drake-single/double conductors with fixing of insulator spacer...
Providing,supplying,Erection and testing & commissioning of Post Insulators - Cylindrical Solid Core Insulators as per IS:5350, Part-II & III For 220KV Side-2 Units / Stack (Rigid Bus)
Providing,supplying,Erection and testing & commissioning of Post Insulators - Cylindrical Solid Core Insulators as per IS:5350, Part-II & III For 220KV Side-2 Units / Stack (Wave trap)
Providing,supplying of 11KV, 120KN Disc Insulator String -220KV Side Single Tension String:String of 16 Units
Providing and supplying of 11KV, 120KN Disc Insulator String -220KV Side Double Tension String : String of 2*16 Units
Providing and supplying of 11KV 90KN Disc Insulator -220KV side suspension string - string of 14 units
Providing and supplying of Bolted Type Double tension clamp to suit Twin Moose ACSR Conductor for 220 KV line & Bus cupler bay
Providing and supplying of Bolted type Tension clamp to suit Moose (a) 220KV Side
Providing and supplying of Bolted type suspension clamp to suit Moose ACSR (a) 220KV Side
Providing and supplying of Bolted type Suspension clamp to suit Twin Moose ACSR for 220KV Line & Bus Coupler Bays
Providing and supplying of C type wedge connector (T- type) suitable for Moose to Moose ACSR -220KV Side
Providing and supplying of C type Wedge connector suitable for Twin Moose ACSR to Twin Moose ACSR (for 220KV line & B/C bays)
Providing and supplying of Connector suitable for High Performance conductor to Twin Moose ACSR conductor for 220KV Line
Providing and supplying of PI clamp suitable for Post insulator and Moose ACSR-220kV side
Providing and supplying of T-connector suitable for 63mm Al. tube and Twin Moose ACSR (For 220kV line bays)
Providing and supplying of Spacers for Twin Moose ACSR on 220KV Side
Providing and supplying of PI clamp suitable for post insulator -220kV side for Wavetrap
Providing,supplying,Erection and testing & commissioning of Auxiliary Transformers: 250 kVA, 11 kV/433 V, 3 phase Delta Star, Dyn11 : Auxiliary Transformer with copper windings & oil, cable terminatio...
Providing,supplying,Erection and testing & commissioning of LTAC Panel (Indoor)LTAC panel (indoor), 415V as per technicalspecification comprising of voltmeter and ammeter, 2 I/C ACB 800A + 2 O/G SFU, ...
Providing,supplying,Erection and testing & commissioning of 1.1 kV class PVC Insulated Armoured Aluminium Cables (a) Power Cable from Auxiliary Transformers to LTAC panels:1.1 kV PVC Insulated 240 Sqm...
Providing,supplying,Erection and testing & commissioning of 1.1 kV class PVC Insulated Armoured Aluminium Cables (b) PVC insulated aluminium power cable (AC supply for lighting and DFDB/SFDB):70 Sqmm ...
Providing,supplying,Erection and testing & commissioning of AC Distribution Box (outdoor):AC Distribution Box Double front type, 24 terminals, 1200 x 1350x600mm , 2I/c of 100A, MCCB 20KA +24 O/G MCB 1...
Providing,supplying,Erection and testing & commissioning of Diesel Generator set rated at58.5 kVA, 3Ph, 415 V, 0.8 pf mounted on a base frame, complete with inbuilt fuel tank and battery 1 No 12 V & i...
Providing,supplying,Erection of Station Battery Battery Set: Plante/Grid Plate type: 220V, 300AH
Providing,supplying,Erection and testing & commissioning of Battery Charger: 2 x 220 V, 300 AH (with 2 No of float and 2 No of float cum boost including control panels, change over arrangement etc., c...
Providing,supplying and Erection of Control Cable: PVC Insulated Copper Control Cable with lugs / ferrules quantities) Size of Cables:2.5 Sq.mm 19 Core
Providing,supplying and Erection of Control Cable: PVC Insulated Copper Control Cable with lugs / ferrules quantities) Size of Cables:2.5 Sq.mm 14 Core
Providing,supplying and Erection of Control Cable: PVC Insulated Copper Control Cable with lugs / ferrules quantities) Size of Cables:2.5 Sq.mm 10 Core
Providing,supplying and Erection of Control Cable: PVC Insulated Copper Control Cable with lugs / ferrules quantities) Size of Cables:2.5 Sq.mm 7 Core
Providing,supplying and Erection of Control Cable: PVC Insulated Copper Control Cable with lugs / ferrules quantities) Size of Cables:2.5 Sq.mm 4 Core
Providing,supplying and Erection of Control Cable: PVC Insulated Copper Control Cable with lugs / ferrules quantities) Size of Cables:6 Sq.mm 4 Core
Providing,supplying and Erection of Control Cable: PVC Insulated Copper Control Cable with lugs / ferrules quantities) Size of Cables:4 Sq.mm 4 Core
Providing,supplying and Erection of Control Cable: PVC Insulated Copper Control Cable with lugs / ferrules quantities) Size of Cables:16 Sq.mm 4 Core
Providing,supplying and Erection of Control Cable: PVC Insulated Copper Control Cable with lugs / ferrules quantities) Size of Cables:70 Sq.mm 2 Core
Providing,supplying and Erection of Copper PVC Instrumentation Cable, Armoured (Screened Cable) Copper Cable with glands/ lugs/ferrules: 1Px1.5 Sq.mm screened cable
Providing,supplying and Erection of11KV UG Cable with the required cable terminations:[a] 11KV XLPE 95 Sq.mm Aluminium Cable-3 Core (Two runs from each Auxiliary transformer to 11KV DP Structure of Pr...
Providing,supplying and Erection of 11kV Cable Termination Kit suitable for following sizes as per Technical Specification. 95 Sq.mm 3 Core - Outdoor
Providing,supplying of Fire Fighting Equipments with necessary mounting Stands:a) Mechanical Foam Extinguisher Type:50 Liters
Providing,supplying of Fire Fighting Equipments with necessary mounting Stands:a) Mechanical Foam Extinguisher Type:9.0 Liters
Providing,supplying of Fire Fighting Equipments with necessary mounting Stands: Water Type (Gas Pressure Type)- 9.0 Liters
Providing,supplying of Fire Fighting Equipments with necessary mounting Stands: Carbon Dioxide Type 4.5 Kgs
Providing,supplying of Fire Fighting Equipments with necessary mounting Stands: Sand Type G.I. Bucket 9 Liters Capacity
Providing,supplying of Fire Fighting Equipments with necessary mounting Stands: Steel Stands
Station Yard Lighting (Outdoor):Lighting/Lighting Mast (LM) are proposed for lighting protection and for illumination. The quantity of lightning / lighting mast indicated are located such that the ent...
Providing,supplying and Erection of FODP - Fibre Optic Distribution Panel-FODP 24F : Indoor type consisting of 1 No of rack mounted LIU (to be housed in FODP) with 24 ports each with FCPC coupling & p...
Providing,supplying and Erection of Fibre Optic Approach Cable-24 Fibre (DWSM) Fibre Optic Approach Cable - Including accessories and Installation Hardware set for 24 Fibre, Fibre Optic Approach Cable
Providing,supplying and Erection of SDH Equipment-(STM-16 MADM upto 3 MSP Protected Directions) Base EquipmentCommon Cards, Cross Connect/Control cards, Optical base cards, Power supply Cards, Power C...
Providing,supplying of Trans Receiver(a) L16.1SFP-3MSP ( 50-75 Kms)
Providing,supplying of Trans Receiver(b) S16.1SFP-3MSP ( 75-90kms)
Providing,supplying of Tributory Interface(a) E1 Interface card (Min 16 Interfaces per card) - 3MSP
Providing,supplying and Erection of Tributory Interface(b) Ethernet interface 10/100 Mbps with Layer-2 Switching (Min 2x1Gbps+4x100/10Mbps ports) Without SFP- 3MSP
Providing,supplying and Erection of Tributory Interface( c) 1x1000 base LX SFP (GIGABIT Ethernet interfaces 10/100MBPS with Layer-2 Switching)
Providing,supplying and Erection of Tributory Interface (d) Cabinet Equipment to house SDH Equipment + Optical cards + Tributory cards, Drop/Insert MUX Equipments and DACS Equipment
Providing,supplying and Erection of Tributory Interface e) 220V DC to 48V DC Converter for SDH Equipment
Providing,supplying and Erection of Tributory Interface f) VOIP Phones
Providing,supplying and Erection of Tributory Interface g) Fail Over/ Switch/ Routers for Change over between OFC & VSAT Communication for SCADA Data
Providing,supplying and Erection of Tributory Interface (e) Digital Protection Coupler of with E1 interface with 220V DC Power Supply
Providing,supplying and Erection of 11KV Isolator & DP Structure.(d) 11KV DB Isolator, 400A, 25kA with LA (for Auxiliary transformers)
Providing,supplying and Erection of 11KV Isolator & DP Structure.(e) 11KV RCC DP Structure for mounting 11KV DB Isolator for Auxiliary transformer
Providing and supplying of Earth resistance tester
Providing and supplying of Portable (mobile) Oil Pump (1/2 HP Air Pump 500 to 1000 gallons)
Providing and supplying of Telescopic Ladder aluminium 6 m height
Providing and supplying of Ring spanners - 12 No per set
Providing and supplying of Tube Spanners - 12 No per set
Providing and supplying of Pipe wrench 24 inches size
Providing and supplying of Pipe wrench 18 inches size
Providing and supplying of Hydraulic crimping tool upto 1000 Sq mm
Providing and supplying of Hydraulic shearing Machine
Threading die set for pipe threading (Market price of RS Pro 8 Piece die set)
Providing and supplying of Arc welding machine (9/10 kVA)
Providing and supplying of Portable drilling machine with stand (heavy duty)
Providing and supplying of Rubber hand gloves 15 kV tested
Providing and supplying of Rechargeable 5 W LED Hand Torch
Providing and supplying of Insulated cutting pliers 12 inches size
Providing and supplying of Insulated cutting pliers 8 inches size
Providing and supplying of Line live tester
Providing and supplying of Screw driver 18 inches size
Providing and supplying of Screw driver 12 inches size
Providing and supplying of Hammer 8 Lbs.
Providing and supplying of Hammer 2 Lbs.
Providing and supplying of Chain pulley block 5 Ton Capacity
Providing and supplying of Hydraulic Jack 5 Ton Capacity
Providing and supplying of Pipe derrick
Providing and supplying of Allen keys
Providing and supplying of Box spanners - 12 No per set
Providing and supplying of Transil oil dielectric breakdown test kit
Providing and supplying of Insulation Tester Digital type (Megger) 2.5 kV - 5 kV
Providing and supplying of Insulation Tester (Megger) 500 V rating
Providing and supplying of SF6 gas leak detector
Providing and supplying of Multimeter electromechanical type
Providing and supplying of Multimeter electronic type
Providing and supplying of Protective Goggle
Providing and supplying of Double end spanner - 12 No per set
Providing and supplying of Hack saw frames +B185
Providing and supplying of Hickery rods
Providing and supplying of Grounding sticks extendable upto 18 ft - 3 No of each 6 ft Sticks of 3 phase R, Y, B (3 No of 1 set)
Providing and supplying of Manilla rope 1" (One bundle of 100 m)
Providing and supplying of Manilla rope 3/4" (One bundle of 100 m)
Providing and supplying of Files of sizes (One set of 6 No)
Providing and supplying of Rubber shoes knee height
Providing and supplying of Safety belts
Providing and supplying of Safety helmet with rachet
Providing and supplying of Steel Measuring tape 30 m
Providing and supplying of Steel Measuring tape 15 m
Providing and supplying of Manual crimping tool upto 400 Sq mm
Providing and supplying of Rain coat with dick back
Providing and supplying of Gum Boots
Providing and supplying of Hydraulic Bolt Cutter / Wire Cutter upto Drake ACSR conductor with bits for cuttings
Providing and supplying of Thermometer with wall mounting holder
Providing and supplying of Steel Almirahs 6.5 Feet
Providing and supplying of Steel Almirahs 6.5 Feet with glass panel doors
Providing and supplying of Officer’s tables
Providing and supplying of Steel Slotted Angle Rack (Big Size)
Providing and supplying of Steel Slotted Angle Rack (Small Size)
Providing and supplying of Steel Dust Bins
Providing and supplying of Executive revolving chairs
Providing and supplying of S-type arm chairs
Providing and supplying of Steel folding chairs.
Providing and supplying of Rubber mats 2000mm x 1000mm x 12mm size tested for 15KV class
Providing and supplying of First aid box
Providing and supplying of Shock treatment charts hard board laminated with colured pictures & Literatures both in kannada & English
Providing and supplying of Water filter/water purifier wall mounting type (Aqua guard type)
Providing and supplying of Sub-station name board duly painted as per specification including erection & civil works
Providing and supplying of Fixograph of size 1.5m x 2.5m with Engilsh/Kannda alphabets
Providing and supplying of Door locks 7 levers (Navtal make)
Providing and supplying of Danger board (probhited) with support structure in front of the gate
Providing and supplying of Equipments name plates & earthing name plates including fixing at outdoor yard. (Rate of Rs 398 per Name plate is Considered as per DPR issued for Torehalli Sub-station) (32...
Providing,supplying and Erection of Smart Surveillance System (CCTV): Using PTZ & Fixed Cameras, OFC monitoring system, HMI etc as per specifications.(a) PTZ Camera:Lens type: Auto foucs with Optical ...
Providing,supplying and Erection of Smart Surveillance System (CCTV): Using PTZ & Fixed Cameras, OFC monitoring system, HMI etc as per specifications.(b) Fixed Camera:Lens type: Bio focal auto iris wi...
Providing,supplying and Erection of Smart Surveillance System (CCTV): Using PTZ & Fixed Cameras, OFC monitoring system, HMI etc as per specifications.(c ) HMI (Industrial Grade PC)Operating System: Wi...
Providing,supplying and Erection of OFC: 6F Armoured Multimode with LIU along with required number of SC/ST Connectors. (Upto 1.0Kms)
Earthmat Formation(a) Supplying and laying of MS flats of size 75 x 12 mm , welding and applying ACB paint to welded portion and covering with soil , as per the drawing/standard specifications without...
Earthmat Formation(b) Grounding of equipment with 75 x 12 mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, dril...
Earthmat Formation(c) Providing 40 mm dia M.S. rod 1.075 meter Long earthmat spikes including heating, bending top 75 mm over lap flattening and making spike edge at one end driving into the earth bel...
Earthmat Formation(d) Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pi...
Earthmat Formation(e) Supplying & Providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.
Providing and supplying of Mandatory spares -Circuit Breaker (CB)-Closing coil with resistor for 220kV CB
Providing and supplying of Mandatory spares -Circuit Breaker (CB)Tripping coil with resistor for 220kV CB
Providing and supplying of Mandatory spares -Circuit Breaker (CB)-Terminal pad for 220kV CB
Providing and supplying of Mandatory spares -Circuit Breaker (CB)-Terminal connector for 220kV CB
Providing and supplying of SF6 gas
Providing and supplying of Isolator- Copper contact finger male & for female for 220KV
Providing and supplying of Isolator- Terminal connector for 220KV
Providing and supplying of Isolator-Terminal pad for 220KV
Providing and supplying of Relay Panel Spares1) All Type of Numerical Relays (1No each type)
Providing and supplying of Tripcircuit supervision relay(2No)
Providing and supplying of Self reset trip relay [1No each type]
Providing and supplying of Hand reset trip relay[1No each type]
Providing and supplying of Timer relay [1No each type]
Providing and supplying of DC supervision relays
Providing and supplying of Flag relays [1No each type]
Providing and supplying of Auxillary relays [1No each type]
Providing and supplying of Mandatory Spares for SAS-Bay Control Unit with Configuration software
Providing and supplying of Mandatory Spares for SAS-Ethernet Switch of each type
Providing and supplying of Mandatory Spares for SAS-Optical Cable fibre of longest length
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in ordinary/soft rock without blasting upto 1.5m depth as per drawing and te...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in hard rock without blasting upto 1.5m depth as per drawing and technical s...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand),complete the work with all lead & lift as per specification and as directed by Eng...
Fibre Optic Armoured Approach Cable-Media Converter
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering complete the work with all lead & lift as...
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications-Stone/Boulde...
FALSE CEILINGProviding and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of ...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance +/-1mm), with wall thickness 2.0 mm (+/- 0.2 mm), corners of the door f...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type),complete the work with all lead & lift as per specification and as directed by E...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...
Providing and placing on terrace (at all fllor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 g,complete the work with all lead & lift as per specification and as direct...
Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 15 mm nominal bore, 86 mm long, weighing not less than 88 g Control Room for 15 mm dia,complete the work with all...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.complete the wor...
Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
PUMPSET : Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000, 3Phase, SS Bowl & Impeller with Low volt Motor as per specification...
SUBMERSIBLE CABLESupply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest am...
PRESSURE GAUGE :Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm
GATE VALVE :Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
NON - RETURN VALVE :Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
ix) Control Panel BOARD-A:Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, An...
POWER CAPACITOR :Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...
MCB : Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/1...
Erection elctrification & Commissioning works of pumpsets : Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply ...
Ercerion of panel board & meter board Unit : Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provid...
Main connections: Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board uni...
Site surfacing and Jelly spreading:1. The site surfacing with due compacting should be executed only after the foundation of all equipments, structures and cable duct and controol room.2. The spreadin...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without s...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without s...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without s...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without s...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without s...
Concealed Conduit System Supplying……mm dia 2mm/2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the sl...
Concealed Conduit System Supplying……mm dia 2mm/2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the sl...
Groove cutting in the wall supplying ….dia 2mm/2.5mm thick heavy gauge PVC Conduit Pipe with bends, metal junction boxes adhesive paste etc.,and bracing U or J hooks and cement plastering up to the ...
Groove cutting in the wall supplying ….dia 2mm/2.5mm thick heavy gauge PVC Conduit Pipe with bends, metal junction boxes adhesive paste etc.,and bracing U or J hooks and cement plastering up to the ...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS - 6A One Way Switch3854 and IS 1293
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring .(9/20) - I. Group A. b.1.5 sqmm
Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring .(9/20) - I. Group A. c.2.5 sqmm
Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring .(9/20) - I. Group A. d.4 sqmm
Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring .(9/20) - I. Group A. e.6 sqmm
Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring .(9/20) - I. Group A. f.10 sqmm
Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring .(9/20) - I. Group A. g.16 sqmm
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (7/16) - a) 1-...
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (7/16) - b) 4-...
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (7/16) - c) 6W...
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (7/16) - d) 8W...
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (7/16) - e) 10...
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (7/16) - f) 16...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws, bolts nuts etc., complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws, bolts nuts etc., complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws, bolts nuts etc., complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws, bolts nuts etc., complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws, bolts nuts etc., complete on the existing met...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate..(8/18) - I. Using Group "A" materials g) 16Amps one way s...
Supplying and fixing one of 230 volts Ding dong bell and Remote with gang box fixed on necessary wooden or rawl plugs using NF screws.
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.(23/22) - 12" Sweep (300mm) a.Group 'A'
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450 mm)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...
Fixing a ceiling/wall mounting fan of all capacities and all types with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps ceiling rose of approved quality with necessary length of 2...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets with bolts and nuts and a 5 amps, ceiling rose wi...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3p...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board.(38/14) - c) 32-40 Amps 4 pole
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable of approved make.(49/32) - b) 2Pair Group A
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/ Bends/ End-caps of same materials in exisiting trench as per IS 14930 part -II sui...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.(73/20) - j) 95 sqmm Long Barrel
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.(73/20) - l) 150 sqmm Long Barrel
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit The pit should ...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (68/3) - Copper strip 600x600x3mm plate
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) - II) Copper w...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. (...
Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board.
Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT)
Supplying and fixing Trivector Meter suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. 5-20A.- Group A
Supplying, fixing and wiring rotary selector switch suitable for Ammeter.(39/21)
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer.class 0.5 accurecy with Tape Wound. - Group A
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C. - Group A
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which ar...
Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7)(70/6) - In soil (hard)
Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm alround the cable.
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required.(69/5) - In exixting trench/duct. 6 sqmm to 16 sqmm
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with therm...
Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947.(32/4) -125Amps Group 'A'
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...
Fabricating supplying and mounting MS box made out. SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w...
Supplying of recess mounting non integrated type LED down light 15-18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with ...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4'-36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Higher than 80. P...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2'-9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Higher than 80. Powe...
Supply of round/square recess/surface mounted rolling type LED Down light withLED square or round down light 5-6W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired...
Fabricating, supplying and erection of ...Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, inclu...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.
Supplying.....litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG ...
Erection charges for fixing a ... litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm...
Supplying .TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacito...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing modular cable sealing system as per KPTCL specfication including cost of materials, labour charges, etc., complete as per direction of engineer in charge of work.
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications Stone/Boulde...
Providing and supplying of Fully automatic Capacitance & Tan delta measuring test.
Providing and supplying of Portable dissolved gas analyser
Providing and supplying of SF6 gas filing adaptor kit for Circuit Breaker.
Providing and supplying of Micro ohm meter (1.0 micro-ohm to 199.99 micro-ohm)
Providing and supplying of BDV test kit
Providing and supplying of Circuit Breaker operational analyzer-DCRM
Providing and supplying of Numerical Relay testing kit
Providing and supplying of Digital DC insulation tester(0-5kV)
Providing and supplying of Online DC earth fault locator with built-in charger & rechargeable batteries
Providing and supplying of Combined CT & VT Analyzer
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Procurement_of_Works_____Use_of_Standard_Tender_Document-Revision-reg..pdf
Instructions to Tenderers • 0.20 MB
220 KV Switching station Bid Document Call-3 fINAL.doc
Tender Document • 21.54 MB
insurance bond format.pdf
Tender Submission Guidelines • 8.26 MB
NIT 4 Switching station.pdf
Instructions to Tenderers • 1.55 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .