Camouflage and external painting to Bldg in Zone A in Domestic area Jaisalmer at AF Stn Jaisalmer

Amount

15mm thick plaster in cement and sand mortar (1:4) on other than fair face of brick work or concrete surfaces or stone masonry surfaces of wall, finished even and fair without using extra cement and including taking down cement plaster complete all as specified and directed.

15mm thick plaster in cement and sand mortar (1:6) on fair faces of brick work or concrete surfaces or stone masonry surfaces of wall, finished even and smooth without using extra cement and including taking down cement plaster complete all as specified and directed.

10mm thick internal plaster in cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer of surfaces of wall any approved by GE complete all as specified and directed.

Preparation of newly plastered surfaces or unplastered surfase of walls and applying two coats of oil emulsion distemper over a coat of chalk whitening complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Preparation of old decorated plastered surfaces by washing, rubbing down and stopping of painting surfaces of wall and applying one coat of cement base paint (tinted) on surfaces of walls any colour as approved by GE complete all as specified and directed.

Preparation of old decorated plastered surfaces by washing, rubbing down and stopping of painting surfaces of wall and applying two coats of cement base paint (tinted) on surfaces of walls any colour as approved by GE complete all as specified and directed.

Preparation of old decorated or unplastered surfaces of walls by brooming down, scrapping down smoke soot, mould, moss and efflorescent salts and greasy spot etc and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated or unplastered surfaces of ceilings by brooming down, scrapping down smoke soot, mould, moss and efflorescent salts and greasy spot etc and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated surfaces of walls by washing, rubbing down and stopping of painted sufaces and applying one coat of oil emulsion distemper of any tint etc complete all as specified and directed.

Preparation of old decorated surfaces of ceiling surfaces by washing, rubbing down and stopping of painted sufaces and applying one coat of oil emulsion distemper of any tint etc complete all as specified and directed.

Preparation of old decorated surfaces of walls by washing, rubbing down and stopping of painted sufaces and applying two coat of oil emulsion distemper of any tint etc complete all as specified and directed.

Preparation of old decorated or unplastered surfaces by brooming down, scrapping down smoke soot, mould, moss and efflorescent salts and greasy spot and applying one coat of exterior emulsion paint on surfaces of walls/floor surfaces (VVIP area) any colour as approved by GE complete all as specified and directed.

Preparation of old decorated or unplastered surfaces by brooming down and steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and greasy spot and applying two coat of exterior emulsion paint on surfaces of walls/floors surfaces (VVIP area) any colour as approved by GE complete all as specified and directed.

Preparation of old painted wooden surfaces or wood based material of any description exceeding over 10cm width or girth and applying one coat of synthetic enamel paint of any tint etc any colour as approved by GE complete all as specified and directed.

Preparation of old painted steel surfaces over 10cm in width or girth as in steel gate, swan neck fencing posts and applying one coat of synthetic enamel paint complete all as specified and directed.

Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 15cm high and 2.50cm width with thick synthetic enamel paint over and including one coat of synthetic enamel paint on plaster or concrete surface for writing of letter complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed

Reinforced cement concrete (Nominal Mix) 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in chajjas and the like complete all as specified. Note:- Reinforcement & formwork shall be measured and paid for separately.

Formwork to flat surfaces of chajjas, chullah hoods, troughs and similar items including edges for rough finished surfaces complete all as specified.

Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

75mm thick Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor and plinth protection, finished surface even and smooth without using extra cement complete all as specified and directed.

Precast cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in louvers and jallies, 50mm thick (measured solid), including all mouldings but excluding frame, set in cement and sand mortar 1:4 complete all as specified & directed.

Factory made precast cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in bonders (for stone waliing), coping, posting, boundry pillars etc with plain fair faces, including chamfers, weatherings throating etc and setting in cement and mortar 1:6 complete all as specified and directed.

Stone railing approved design and pattern suitable for any surfaces as in existing containing 30-40cm wide, including 10cm thich base stone fixed to levelled surface fixed in cement and sand mortar 1:4 after dismantling of existing railing of any description, size and demolition of existing surface for resting base stone and make good surface with neat cement, making suitable size holes in base stone to receive railing posts (post girth upto 40cm) at 25-30cm centre to centre, confined by top hand rail of same stone, hand rail to be fixed with large post (newel) at top and bottom (landings) of girth upto 60cm and and height upto 1.40m, intermediate post of height (upto 1.00m) to be fixed between base stone and hand rail making all holes fixed with coloured cement, chemical to match the colour of railing, washing of complete prepared railing with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone complete all as specified and directed. Note: (i) Measurement will be taken along sloped length for payment surpose. (ii) Rates are included base stone, newel post, stone railing with all suitable fixing arrangements in position as directed. (iii) Photo of required design enclosed for ready references.

S K TRADER