SUPPLY AND INSTALLATION OF LAB EQUIPMENTS AND MATERIAL FOR VOCATIONAL EDUCATION LAB

Amount

Pipe Die- Used to cut threads in a hole

PIPE WRENCH -Used on pipes close to the wall or parallel work. An offset pipe wrench is used to grab onto pipes at awkward angles or in tight spots

PIPE VICE -used to hold pipe or tubing securely so that it can be cut or threaded. Pipe vices are also useful for pipe welding.

PIPE VICE - used to hold pipe or tubing securely so that it can be cut or threaded. Pipe vices are also useful for pipe welding.

WOODEN BENCH - uses, see Bench. Classic garden bench. A bench is a long seat on which multiple people may sit at the same time. Benches are typically made of wood, but may also be made of metal, stone, ...

HAMMER SLEDGE - uses, see Hammer (disambiguation). A modern claw hammer. A hammer is a tool consisting of a weighted "head" fixed to a long handle

HAMMER SLEDGEuses, see Hammer (disambiguation). A modern claw hammer. A hammer is a tool consisting of a weighted "head" fixed to a long handle

FLAT CHISAL-used for applying detail, smoothing surfaces and finished forms. It is usually held at 35-60° to the surface of stone but like other chisels it can be used in various ways, carefully to smooth or more roughly to shape quickly.

FLAT PUNCH - This punch has a parallel shank end and does not have a pointed end like a center punch but instead a flat base.

PIPE WHEEL CUTTER UPTO - use in extremely tight places, these tubing cutters require minimal swing .... up to 2 1/2” with the jacket either off or on, Reed recommends the TC2QRGT

SPANNER SET DOUBLE ENDED- used to provide grip and mechanical advantage in applying torque to turn objects—usually rotary fasteners, such as nuts and bolts—or keep them from turning.

SPIRIT LEVEL LENGTH 2 FEET - measure slope in fractions per foot of pitch

SCREW SPANNER -spanner use to grip and leverage to turn nuts and bolts

SCREW DRIVER - usually hand-operated, for turning screws with slotted heads.

GRIP PLIER-Uses Guide to find out more. ... Once locked in place, the pliers literally grip material like a vice

POKER- use poker equity charts when determining how to proceed with a drawing hand

CUTTING PLIERS -used for gripping something round like a pipe or rod, some are used for twisting wires

HACKSAW FRAME WITH BLADEs - cutting vertically downwards with work held in a bench vice

PLUMB BOB plum bob

COCKING CHISEL-cutting a hard material such as wood, stone, or metal by hand, struck with a mallet, or mechanical power.

BLOW LAMP -It is a portable tool which produces a flame for various heat applications such as soldering

TROWEL MASON SMALL AND BIG -trowel used in brickwork or stonework for leveling, spreading and shaping mortar or concrete

SPADE WITH HANDLE - the basic hole digging, the spade is handy for slicing off sod in preparation for using an area for planting

MORTAR PAN -A mortar pan is a vessel made of steel or rigid plastic used to hold or carry sand, cement, mortar and concrete.

HAND DRILLING MACHINE -A hand drill is a manual tool that converts and amplifies circular motion of the crank into circular motion of a drill chuck.

CLEANING BRUSH AND PAINTING BRUSH 2-Use mineral spirits or paint thinner to remove oil based paints

PIPE BENDING MACHINE -used to bend tubes and pipes to produce finished parts

OIL CAN (SMALL )-An oil can can also be used to fill oil-based lanterns

CHAIN WRENCH UPTO - used to hold or turn a smooth circular object. Easy to use, these wrenches are a heavy duty tool

HAND BENDING MACHINE-Use bending machines to bend metal pipe and tubing.

LADDERExtension and Straight Ladders Raise the extension ladder to the desired height and lock both sides

HYDRULIC PRESSURE TEST PUMP used to check the component to be tested is being filled up with an incompressible liquid, usually water or oil

SAFETY BELT-used by fighter pilots. ... Occupations that may involve the use of safety harnesses include:.

SHOVEL- A shovel is a tool for digging, lifting, and moving bulk materials, such as soil, coal, gravel, snow, sand, or ore.

PICKAXE The pointed end is used both for breaking and prying, the axe for hoeing, skimming, and chopping through roots.

MASON SQUARE- The Mason's Square, is an instrument used to ensure that two perpendicular surfaces are at a right angle with each other.

STEEL SCALE- The steel rule is a basic measuring tool. When used correctly, a good steel rule is a surprisingly accurate measuring device

DIA GAGE - They are typically used to measure deck clearances, crankshaft thrust and straightness, lifter travel and other measurements that involve the distance between two surfaces or small amounts of component travel.

GI PIPE -GI pipes are low carbon and zinc protected pipes respectively, used in a variety of industries. ..

GI pipes are low carbon and zinc protected pipes respectively, used in a variety of industries. ..

GI pipes are low carbon and zinc protected pipes respectively, used in a variety of industries. ..

GI pipes are low carbon and zinc protected pipes respectively, used in a variety of industries. ..

PVC PIPE-There are many uses for PVC. As a rigid plastic, it is used as vinyl siding, magnetic stripe cards, window profile, pipe, plumbing and conduit fixtures.

PVC PIPE-There are many uses for PVC. As a rigid plastic, it is used as vinyl siding, magnetic stripe cards, window profile, pipe, plumbing and conduit fixtures.

PVC PIPE-There are many uses for PVC. As a rigid plastic, it is used as vinyl siding, magnetic stripe cards, window profile, pipe, plumbing and conduit fixtures.

PVC PIPE-There are many uses for PVC. As a rigid plastic, it is used as vinyl siding, magnetic stripe cards, window profile, pipe, plumbing and conduit fixtures.

CI PIPES -use as a pressure pipe for transmission of water, gas and sewage, and as a water drainage pipe

STONE WARE PIPE- used for drainage, typically four or six inches in diameter. Stoneware is usually fired at a higher temperature than earthenware

WHITE WASH BASIN-use it almost anywhere; hotels, cinemas, clubs, lounge etc. For its classy design, compact design, and durability, the wash basin from cera is ...

WHITE I.W.C CISTEN- A cistern is a waterproof receptacle for holding liquids, usually water.

WHITE E.W.C-An open front airplane toilet seat, with notices telling users to not flush litter down the toilet and to keep the toilet seat clean for the next user with cover

WHITE 'P' TRAP- the trap is cemented into place, use a hacksaw to cut the trap at the wall pipe.

WHITE 'S' TRAP - use in tubular drain applications.

WHITE KITCHEN SINK- use a plate stand to create extra space on the bathroom counter

WITH URINAL-A urinal is a container used to collect urine. It is shaped to fit either a man or a woman

BIBCOK (1) & (S) (TAP)- First one is 2 lever basin mixer and the second one is single lever basin mixer. .... To use hands to get cleaned up

PILLAR COCK & ANGLE COCK-Pillar Cock is a faucet used for installation on wash basin of a bathroom.

BALL VALVE-They are used in the oil and natural gas industry, but also find a place in many manufacturing sectors, chemical storage, and even residential uses.

GATE VALVE -they are designed to be fully open fully closed

GLOBE VALVE-they are designed to be fully open fully closed

CHECK VALVE-they are designed to be fully open fully closed

NRV-non return valves

FOOT VALVE -foot valvel like ball check valve but have an open end with a shield or screen over it to block debris from emtering the line

G.I. ELBOW-elbow is installed between two lenthes of pipe to allow change of direction

G.I. ELBOW-elbow is installed between two lenthes of pipe to allow change of direction

G.I. ELBOW-elbow is installed between two lenthes of pipe to allow change of direction

G.I. ELBOW-elbow is installed between two lenthes of pipe to allow change of direction

G.I. TEE -tee used to connect pipe lines with a pipe at a right angle with the line

G.I. TEE -tee used to connect pipe lines with a pipe at a right angle with the line

G.I. TEE -tee used to connect pipe lines with a pipe at a right angle with the line

G.I. TEE -tee used to connect pipe lines with a pipe at a right angle with the line

G.I. REDUCER ELBOW-when the ends differ in size it is known as a reducing or reduser elbow

G.I. REDUSER ELBOW when the ends differ in size it is known as a reducing or reduser elbow

G.I. REDUSER ELBOW -when the ends differ in size it is known as a reducing or reduser elbow

G.I. COUPLING-a coupling is very short lenth of pipe with a socket at one or both ends that allows two pipes to be joined

G.I. COUPLING-a coupling is very short lenth of pipe with a socket at one or both ends that allows two pipes to be joined

G.I. COUPLING-a coupling is very short lenth of pipe with a socket at one or both ends that allows two pipes to be joined

G.I. STRAIGHT REDUCER -reducer are used to join pipe section of diffirent diameters on the same axis

G.I. STRAIGHT REDUCER -reducer are used to join pipe section of diffirent diameters on the same axis

G.I. STRAIGHT REDUCER -reducer are used to join pipe section of diffirent diameters on the same axis

G.I. BEND bend to use pipe ends

G.I. BEND bend to use pipe ends

G.I. BEND bend to use pipe ends

G.I. UNION union can use disjoint two pipes very easily

G.I. UNION union can use disjoint two pipes very easily

G.I. UNION union can use disjoint two pipes very easily

G.I. UNION union can use disjoint two pipes very easily

G.I. NIPPLEuse nipple is fitting consisting of a short piece of pipe

G.I. NIPPLEuse nipple is fitting consisting of a short piece of pipe

G.I. NIPPLEuse nipple is fitting consisting of a short piece of pipe

P.V.C ELBOW (45 DEGREE) use the derection pipe line

Perfect Suppliers