REPAIRS MAINTENANCE TO E M INSTALLATIONS OF RESIDENTIAL AREA AND MISC REPAIR REPLACEMENT OF FLOORING PLUMBING AND JOINERY WORK IN SCIENTIST HOSTEL UNDER GE I RND DELHI

Amount

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick cement plaster on brick/concrete surface in CM 1:4 finished even and fair surface without using extra cement mixing with liquid WPC complete all as specified. Note :-(i) Water proofing compound shall be paid separately (ii) Rate also includes necessary scaffolding to carry out work upto a height of 15m.

M&L for 10mm thick cement plaster on brick/concrete surface in CM 1:4 finished even and fair surface without using extra cement complete all as specified

M&L rendering 15 mm thick in CM (1:6) on brick walls or concrete surface, surface finished even and fair without using extra cement complete all as specified and directed. Note:- (i) Rate also includes necessary scaffolding to carry out work upto a height of 15m.

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja etc.complete all as specified and directed.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved by GE complete all as specified and directed.

M & L Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 2mm wall care putty (each coat minimum 1mm thick) all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint with rooler/spray having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including water based priming coat of exterior primer applied @ 0.90 litre/ 10sqm over New plastered surface complete all as specified and directed. Note:- (i) Rate also includes necessary scaffolding to carry out work upto a hight 15MTR.

Preparation of newly plastered wall surfaces and applying two coats of cement base paint over priming paint.

M & L Preparation of newly plastered surfaces of Ceiling,chajja and applying three coats of white wash complete all as specified and directed.

Complete removal of existing treatment from internal / external plastered or unplastered surfaces of walls complete all as specified and directed.

M&L for 2mm thick layer(Each coat min 1mm thick) of white wall care putty on scrapped/uneven surfaces of any description to match with the existing surfaces complete all as specified and directed

M&L for applying two coat of oil bound distemper on walls including preparation of old decorated surfaces including filling minor holes with wall care putty and including brooming down or steel wire brushing, scrabing down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots complete all as specified and as directed

All as per item No. 13 above but on ceiling surfaces

M&L for applying one coat of synthetic enamel paint over old painted wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint over old painted steel surfaces of any descripition over 10cm width or girth including preparation of old surfaces complete all as specified and as directed

M&L for applying two coats of French polishing on old surfaces of any description, width or girth including preparation of surfaces complete all as specified and as directed

S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) triple layered hoisted and fixed in position 500 ltrs capacity including dismantling old water tanks and removing away from site and disconnecting and refixing the GI pipe and fittings complete all as specified and directed.

S&F in rotational moulded polythene water storage tank (Cylindrical vertical with closed top) triple layered hoisted and fixed in position 1000 ltrs capacity including dismantling old water tanks and removing away from site and disconnecting and refixing the GI pipe and fittings complete all as specified and directed.

S&F in repair 15 mm dia GI steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair GI steel tubing medium grade galvanised 20mm dia with all fittingsand fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair 20mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threadedp o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

All as per Srl item No- 22 but 25mm outer dia.

Making connection of PP-R distribution branch with PP-R main of sizes 16 to 40mm outer dia of pipe by providing and fixing tee including cutting and making fusion joint etc.complete all as specified and directed.

S&F in repairs PP-R gate valves (brass insert) for 25 mm outer dia of pipes as per requirement of the site.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and directed.

S&F in repair PVC valve less 10ltrs capacity syphonic action type flushing cistern low level white with inlet ball valve float and handle push type including flush pipe 32mm dia and connection to WC complete all as specified and as directed

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) incl Plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.

Supply and fix in repair wash hand basins, white colour,vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified and directed.

M&L in repairs 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete B-1, (1:2:4) complete all as specified and directed.

S&F in repair Toilet paper holder vitreous china box type fixed to wall with CP brass screw complete all as specified and directed.

S&F in repair plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repair CP grating 125 mm dia with or without hole for waste pipe fixed on floor / nahani trap fixed with cement morter complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber led joint fixed with to wall complete all as specified and directed.

S&F in repairs PVC (SWR) 110mm dia bends complete all as specified and directed.

S&F in repairs PVC connections 15mm dia & 600mm long with PTMT nuts complete all as specified and directed.

S&F in repairs chromium plated brass shower rose 125mm dia with swiveil joint complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame)n.exc 1.5sqm and making good to distrubed surface complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exc 1.5sqm but n.exc 4 Sqm and making good to distrubed surface complete all as specified and directed.

Taking down shutters exc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates of size 125x60 mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25 mm thick MS sheet complete all as specified and directed.

M&L 2nd class hard wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as spd and directed

M&L Providing, cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate for filling of Pressed steel frame etc, rounded or chamfered on edges complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton door shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing palin, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as spd in SSR Part I sec 8 clause 8.20 (a) complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any descripition over 10cm width or girth including preparation of surfaces complete all as specified and directed.

S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and directed.

S&F factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face with particle board core supplying & fixing in frame at site as per specification & drawing

S & F factory made solid pannel PVC door shutter 30mm the style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gep insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per spacification and drawing.

S & F stainless steel butt hinges 100 mm long complete all as specified and directed.

S&F 100 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,type B-21 complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.

S&F 150mm size aluminum handles cast type, anodized complete all as specified and directed.

S&F in repair 200 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.

S&F in repair 100 mm long aluminum anodized barrel tower bolt of extruded section all as spd and directed

S&F in repair 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repair 100mm mild steel Mortice lock, vertical type of make Gogrej or equivalent of MS 2 leavers complete all as specified and directed

S&F in repair 125mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repair of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140mm complete all as specified and directed.

S&F in repair 20mm dia MS CP curtain rods with fixing brackets, stops etc complete all as specified and directed

S&F in repair MS case ment stay size 300mm with hinged joint and two plates with studs complete all as specified and directed.

S&F Powder Coated(minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder Coated(minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F Powder Coated(minimum thickness of powder coating 50 micron)aluminium window and ventilator shutters(wire mesh shutter and glaze shutter), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including hacking out old glasses upto a height upto 15mtr including necessary steel/wooden scaffolding etc complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including hacking out old glasses upto a height upto 15mtr including necessary steel/wooden scaffolding etc complete all as specified and directed.

All as per ser item No-72 here-in-before but exc. 0.50 Sqm in each pane

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane

S&F 5 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including rubber beading complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing off the premises complete all as specified and directed.

M&L for Coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed in CM(1:6) complete all as specified and as directed.

M&L for light shade Vitrified Ceramic tiles 8 to 9 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick Screed bed or bedding layer of cement mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for light shade Vitrified Ceramic tiles 8 to 9 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.06 sqm,vertical surfaces as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl10mm thick cement mortar in CM 1:4 complete all as specified and as directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) polished, area of each tiles exc.0.18sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick in CM 1:6 and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc.0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick in CM 1:6 and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300 X 200 X 7mm thick set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or colour cement to match the shade of tile complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or colour cement to match the shade of tile complete all as specified and directed.

M&L prepolished coloured chequred cement concrete tiles 300X300X25 mm size set in screed bed 20 mm thick in cement mortar 1:4 including necessary PCC coping around the chequered tiles complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar or laid dry complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed. Including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick in staircase riser/thread/skirting dado etc laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed. Including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

M&L for Granite stone 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cemen mortor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Including 20mm thick screed bed or bedding lay in CM 1:6 complete all as specified and directed.

M&L for rubber moulded prepolished coloured precast concrete interlocking paver block 60mm thick of any shape and size with grey cement and pigment confirming to IS 15658-2006 M-35 Grade, complete all as specified and directed.

Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub class B old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) Gde Fe 410-0 W (Gde E-250) quality A complete all as specified and directed.

S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

M&L preparation of new steel & iron surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of primer complete all as specified and directed.

Dismantling Asbestos corrugated & Semicorrugated etc sheetin in roof covering of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed at site.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L-type or J-type or cranked bolts and washer in roof and wall etc complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

M&L in repairs aluminium sheeting 0.71 mm thick fixed to wooden shutters with CP screw including cutting to required size etc complete all as specified and directed.

M&L Cement concrete type B2 1:2:4 (40mm graded aggregate) as in foundations, filling and mass concrete/Subbase complete all as specified and directed.

M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection,subbase etc complete all as specified and directed.

M&L Cement concrete type C2 1:3:6 (40mm graded aggregate) as in foundations, filling and mass concrete/Subbase

Removing building materials etc.to a distance of upto 20 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

Taking down old tarfelt water proofing treatment on roof surfaces and removed from site complete all as specified and directed.

Roughening surfaces of old concrete floor by picking,sweeeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm complete all as specified and directed.

Material & Labour for 15mm thick rendering on roof surfaces in cement mortar (1 : 4) using with WPC finishes the surface even and smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound shall be paid separately

M&L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.30 Kg/Sqm complete all as specified and directed.

M&L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat will be paid seperately.)

M & L 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.Note: Application of APP membrane must be done by authorised applicator of membrane manufacturer.

M&L for applying two coats of bitumen based aluminium painting on water proofing treatment with preparation of surface as on non assesible area complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified. Note: 1. Rate also includes necessary scaffolding to carry out stone grit plaster work upto a height G+7 floor. 2. Payment for providing grooves as specified shall be also includes in quoted rates.

Clearing away all grass, cleaninig/brooming to terrace floor, vegetation, saplings, shrubs, brushwood, undergrowth, digging out roots, filling holes and levelling ground, and removing rubbish outside the MoD periphery of the area under clearance upto a distance of 10KM complete all as specified and directed. Notes :-(a) The cleaning of grass/vegitable/brushed growing to be cleaned upto 7 (Seven) storey and making good with PCC 1:2:4 type B1 and finishing the surface to match the exisitng surface complete all as spceified and directed by Engr-in-Change(b) Rate also includes necessary scaffolding, tools & plants to carry out the job upto a height G+7 floor. Notes : (a) The rate includes necessary cleaning of floor/tiles, doors/window incldung glass panes after complete of painting (b) Rate also includes necessary scaffolding, tools & plants to carry out the work/job upto a height G+7 floor.

M&L for repairing of spalled concrete from RCC surfaces (such as ceiling, beams, coloumns, parapets, chajjas etc) in the following stage :- (a) Preparation of existing surfaces like chipping of unsound weak/loose concrete with electric hammer or manually including tapping all edges, making square shoulder of cavities etc not exceeding 50mm thickness, including removal of cebrises complete all as specified and directed. (b) Applying rust remover cum passivators Sika rust off 100@ 0.20 Kg/Sqm in each coat as per manufacturer instructions to remove rust from existing reinforcement (Make :- Sika/Fosroc/Asian Paint). (c) Applying a epoxy base Zinc rich rebar corrison protection system of product Frianzic(R) @ 0.15kg/Sqm in each coat as per manufacturer instruction. (d) Mixing and applying two components epoxy resin concrete bonding coat of Sikadur R&B-42 @ 0.10 Kg/Sqm (Mixing Proporation as per manufacturers instruction) including preparation of surfaces by chipping and thoroughly cleaning of surfaces complete wherever required over new reinforcement (if required) and as directed. (Make : Sila/Fosroc/Asian Paint) Applying two layers of guniting over steel welded mesh 2mm dia of wire and aderture 75mm total thickness of guniting not exceeding 40mm (Avg thickness) in CM 1:2 using OPC 53 grade cement mixing with polycerate mixture 2% by weight of cement or as per manufacturer instruction. (e) Applying a prebached one component polymer modified cementious patch repair morter not exceeding 50mm in layers of 15mm thick each product Sika mono Top @ F as per manufacturer instruction to match the existing surfaces as in sides and soffits etc of slabs, chajjas, fins, facias, parapets, lintels, colum and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC membrance at any height upto G+6 storey buildings including removal of all small tress/shurbs etc complete all as specified and directed. Note : Rate also includes necessary scaffolding to carry out work upto a height G+6 floor.

Taking down and adjusting / repairing of steel window shutters for smooth opening/closing including greasing, welding and adjustment of projecting type friction hinges in any position to make fully functioning and refixing in same position including making good the distrubed surface complete all as specified and directed.

S&F in repair Steel rolling shutters, with out ball bearing, as specified including top cover, an?choring rod, hasp and staple and one shop coat of primer;erected in position as indi?cated, complete: push pull or manual type lath thickness 1.25mm complete all as specified and directed.

S&F in repair solid PVC wall lining/panelling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site over and including PVC frame as per specification and drawing complete all as specified and directed.

Removal of air lock/blockage of water in GI tubing 15mm/20mm bore cleaning the pipe or fitting etc and refixing the same in position all as specified

Repair to leakage in bib taps,pillar taps,stop cock, angle valve and low level flushing cistern,etc of any description by changing the washer etc all as specified

M&L for easing door,window shutters of any size/any number of panels for easy closing/opening, tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and as directed.

Supply and fix in repairs brass spindles for bib tap and angle cock etc (as per sample kept in office) complete all as specified and directed.

Supply and fix in repairs Brass spindle for WHB mixer and Wall Mixer and concealed stop cock (as per sample kept in office) complete all as specified and directed.

S&F in repair small fittings galvanised iron medium grade such as sockets, elbow, nipple,tee,union and hexa nipple etc as requiered for GI tubing for 15mm bore pipe complete all as specified and as directed.

All as per Item Srl No 125 above but for 20mm bore pipe

S&F in repairs in ball valve high pressure of PTMT complete with aluminum rod with polyplast ball for 15mm dia iron pipe complete all as specified

All as per Item Srl No 127 above but 20mm bore

S&F in repairs 20mm gun metal, globe or gate valves wih iron wheel head,screwed both ends for iron pipe complete as specified and as directed.

All as per Item Srl No 129 above but 25mm bore

All as per Item Srl No 129 above but 40mm bore

Disconnecting existing tanks, setting aside (or lowering if equired ) for repairs ,cleaning,etc.and hoisting if required reconnecting and refixing in position. including cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 ltr to 500 ltrs capacity of tanks complete all as specified and directed.

All as per Item Srl No 132 above before but capacity of tank exc.500 ltrs but n.exc.1000 ltrs

All as per Item Srl No 132 above but capacity of tank exc.1000 ltrs but n.exc.2000 ltrs

S&F in repair over head water tank cover for tank capacity 500,750&1000 litr with fixing bracket and screw

S&F in repair over head water tank cover for tank capacity 2000 litr with fixing bracket and screw

S&F in repair angle valve 15mm dia cast copper alloy chromium plated fancy type with capastan head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs Bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule & fixed in repair complete all as specified and directed.

S & F in repair of vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S&F in repairs sand cast iron `P' or `S' trap 100mm dia complete all as specified and directed.

S&F in repair jet spray with tube for single symphonic EWC complete all as specified and as directed

S&F in repair 75mm size butt hinges, medium weight cold rolled mild steel all as spd and directed

S&F in repair 100mm size butt hinges, medium weight cold rolled mild steel all as spd and directed

S&F in repairs continous (piano) hinges mild steel bright finish or electro galvanised width of flaps (when open) 40 mm all as spd and directed

Supply and fixing in repair Aral bihari 0/8/16 crank hinges of standered size and screw complete all as specified and directed

S&F in repair 50 mm brass Mortice lock, vertical type of make Gogrej or equivalent of MS 2 leavers complete all as specified and directed

S&F in repair fancy type pillar tap 15mm dia cast copper alloy with capstan heads chromium plated screwed down high pressure with or with out lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repair complete all as specified and directed.

S&F in repair waste fitting CP Brass 40mm dia for sink,basin brass chromium plated. complete all as specified and directed.

S&F in repairs brackets for towel rails complete all as specified and directed.

S&F in repair aluminium (Extruded section body)door closer hydraulically regulated,designation No. 2, universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete all as specified.

Welding in repair exc.2.5cm but n.exc.5cm in length of metal having thickness n.exc, 6mm complete all as specified and directed.

S&F 12mm thick Prelaminated particle board, interior grade, Prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work by taking out old unserviceable board from Kitchen cupboard/almiraha complete all as spd and directed.

S&F in repair 18-19mm thick Prelaminated particle board, interior grade, Prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work by taking out old unserviceable board from Kitchen cupboard/almiraha complete all as spd and directed.

S&F in repair plywood 4mm thick, grade BWP, type BB fixed with screw to timber frame work complete all as specified and directed

S&F in repair plywood 6mm thick, grade BWP, type BB fixed with screw to timber frame work complete all as specified and directed

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed in wooden cabinets

S&F in repair 50mm dia brass polished cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as spd and directed

S&F in repair 100mm size hasp and staple aluminium anodised, safety type with mild steel hinge pin incl bolt to hinge plate and fixed wiith screw all as spd and directed

M&L for grinding polished the terrazo tile/kota stone flooring/marble stone flooring and wall complete including wax polished all as spd. Note standard size machine shall be used for griding floor and hand grinding machine be used for vertical surface ie dado/skirting etc complete all as specified and as directed..

S&F in repair kitchen plate rack of size 33" X 31" X 10" made out of 1mm thick stainless steel complete all as spd and directed

S&F in repair night latch 75 mm 4 lever brass body complete all as specified and as directed

S&F towel ring chrome plated complete all as spd and directed

S&F in repair 20mm thick 2nd class hard wood weather boarding, clean sawn plain for resting of PVC loft tank and aluminium sheet 1mm thick all round wood complete all as spd and directed.Note: No extra cost will be given for removing the loft tank/plumbing work for replacement

S&F in repairs sand cast iron soil waste & vent pipes 75mm dia in any length with or without ears with cement joint fixed to wall complete all as specified and directed.

S&F in repairs sand cast iron soil waste & vent pipes 100mm dia in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia pipe complete all as specified and directed.

All as per Item Ser No. 167.00 above but 100mm dia

S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specification and as directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including hacking out old glasses complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F PVC(SWR) 75mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint laid in trenches or in floor all as spd & directed

S&F PVC (SWR) 75mm dia bends all as spd & directed

S&F in repair flush pipe PVC for low level flushing cistern including jointing to WC complete all as specified and directed.

S&F in repair faucet health (hand jet) 15mm bore with 1mtr tube and fitting complete all as specified and directed. Make:Prayag/parryware/Essco

M&L for white cement in traps/sides of 'P' or 'S' trap/joint of flush pipes and WC and making good complete

S&F 35mm thick factory made, 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) all as spd and directed

M&L preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

S&F in repair of 32mm dia PVC waste pipe fixed to WHB,sink,Urinal complete all as specified and directed.

S&F in repair fancy type chromium plated two way bib cock of 15mm bore two way bib cock screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

M & L for Applying silicon sealeant on joints of wall, cill, jambs roof, window etc.with sufficient quantity for proper sealing of joint all as specified and directed.

M&L for washing/rubbing down and stopping of distempered, plastered and painted surfaces of wall/ceiling including cornices etc and making good of holes by filling holes in plastered surfaces with POP mixed with distemper and applying one coat of distemper oil emulsion complete all as specified and as directed.

S&F in repair vertical venetian blind consisting of aluminium head rail, vanes/louvers 4” prime wide of approved tint and traverse cord complete all as specified and directed.

m/s Kailash Chander

SAWARIYA ENGINEERS AND CONTRACTORS

V.V CONSTRUCTIONS