Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.9 Cr
EMD Value
₹2.5 L
Closing Date
20 May 2025, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
Veeresh B
Construction of wet well at old Amaravathi in ward No. 30 and at Dresses camp in ward No. 14 in Hospet CMC Limits Under NP-4 Grant
DMA/2024-25/OW/WORK_INDENT32188/CALL-3
DMA/2024-25/OW/WORK_INDENT32188/CALL-3
Open
Other Works
Two Tender Document System(Two Cover)
DMA District Urban Development Cell Vijayanagara
1 document required · 1 mandatory
To qualify for award of this contract each tenderer in its name should have in the last five years. Satisfactorily completed as prime contractor, at least one similar work such as STP with Wet Well (wet well work done value is not less then Rs.96.50 Lakhs) / Wet well Rs 96.50 Lakhs (Performance Certificate certified by Not less than the ranking of EE)
Executed in one year (for a continuous period of 12 months) the following minimum quantities of work Earthwork excavation- 854.67 Cum
Executed in one year (for a continuous period of 12 months) the following minimum quantities of work All type of Cement Concrete (Plain and Reinforced) 253.93 cum
Executed in one year (for a continuous period of 12 months) the following minimum quantities of work Steel reinforcement / TMT Steel 64.36 TON
Contractor Registration Certification
To qualify for award of this contract each tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24 achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs 386.00 Lakhs
liquid assets and or availability of credit facilities of not less than Rs. 57.90 Lakhs (Credit lines/ letters of credit/ certificates from Nationalized / Scheduled banks for meeting the fund requirement etc). (Usually not less than 30% of the estimated cash flow) standard format enclosed in bid document. (conditional Banker Certificate is Not Accepted)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
₹4,830
₹2.5 L
25 Apr 2025
25 Apr 2025
21 May 2025
6 May 2025
5 May 2025
Construction of wet well at old Amaravathi in ward No. 30 and at Dresses camp in ward No. 14 in Hospet CMC Limits Under NP-4 Grant
Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing an...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.5...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.5...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to ...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an eve...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials,conveying ...
Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments.(PWD Common S.R Vol-5, 2023-24 Rate Item No.13.47,...
Guide pipe holder - MS
MS auto rail guide pipe-50mm minimum.
D.I Dismantling joint-150 mm dia
M.S Chain-8 mm thick
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
NON RETURN BALL VALVE: Supply and delviery at site brand new D.I Ball valve suitable for handling water containing fibrous materials and solids of 80mm a)150mm dia P.N. 1.0
Delivery pipes and specials:Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduc...
PRESSURE GAUGE: Supply and delivery at site brand new 150mm dia Board approved make suitable dia sealed precision tube glycerine filled stainless steel pressure guage with stop cock, two way cock, nip...
Transformer : Supply, erection, electrification and commissioning at site, brand new Board approved make or any other make to be approved by the Board Distribution Transformer - 3 Phase, 11kV/433V - S...
Load break switch for transformers(ESCOMs SR 2023-24 Vol No: 6, Page No: 17, Iteam No: 41.01 )
8 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2 (Refer Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018)(ESCOMs SR 2023-24 Vol No: 6...
Main side cable:- 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per...
Load side cable:- Supply and deliverty at site brand new Board approved make or any other make to be approved by the Board Aluminium satndard conductors PVC insutated, sheathed steel tape/wire armoure...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, ...
11 KV HT XLPE CABLE: Supply and laying of new Board approved make or any other make to be approved by the Board 3 x 95 sqmm aluminium, earthed, round armoured XLPE HT cable for the purpose of connecti...
Construction of platforms (1.5x1.5x1.2) mtr in size stone, for erection of 25 KVA transformer and LBS including all materials, labour.Excavation of (1.5x1.5x1) mt pit for ...
Erection of control panel, auxilary panel, carrier cabinet, marshalling bay kiosk etc., alignment and fixing properly to foundation base including movement from the point of unloading to the point of ...
Erection of pumpsets: Laying and jointing of pipes and specials, lowering of pumpset into the wetwell and jointing delivery pipes, guide rail system, MS chains and lowering into the wetwell upto the f...
The works shall include digging of trenches size of 0.60 Mtrs. deep & 1.0 Mtrs. wide providing sand bedding to the cables laying the cable in trench providing cable marking bricks refilling, consolida...
The works shall include digging of trenches size of 0.60 Mtrs. deep & 1.0 Mtrs. wide providing sand bedding to the cables laying the cable in trench providing cable marking bricks refilling, consolida...
GI Pipe B - Class as per IS-1239 100 mm (ESCOMs SR 2021-22 Vol.6, Page No 38 I no 48.08)
LAYING IN G.I PIPE: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 3x95 to 150 (ESCOMs SR 2023-24 Vol....
LAYING IN G.I PIPE: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 3.5 x 50 sqmm 11 kV class (ESCOMs S...
Laying of load side cable: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm a) 3x 10 Sq mm...
Laying of load side cable: Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm b) 3x 6 Sq mm ...
2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 600 x 50 mm ( PWD Ele SR 2-23-24 Page No: 55 Iteam No: 12.59.4 )
EARTHING: Supplying fixing andwiring earth electrode for groundingof lifts, transformers, DGsetsetc. using 40mmdia2.9mm thick2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed ...
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete ...
GI/Copper strips for grounding connections, using necessary fixing
materials as required (PWD ELE SR 2023-24 Page No 55 I no 12.58.5)
Laying and jointing of MS pipes and specials for suction & delivery connections of the pump using suitable size bolts, nuts, packing etc., complete including fixing foot valve, all types of valves, ga...
Supply and installation of 4.5Kg C02 gas valve type Fire Extinugisher, Tro lley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diam...
Supplying of first aid box. Complete (PWD Ele SR 2023-24 Vol.6, Page No 93 I no 15.114)
Supplying of four bucket stand alongwith buckets. Complete (PWD Ele SR 2023-24 Vol.6, Page No 93 I no 15.111)
Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinerycomplete as per specifications.(PWD Ele SR 2023-24 Vol.6, Page...
Supplying of Hand gloves. Complete (PWD Ele SR 2023-24 Vol.6, Page No 93 I no 15.113)
Tool Kit: Supply and delivery at site best Taparia/or any other Board approved make and other reputed make tool sets for operation and maintenance of the above pumpsets comprising of the following.a) ...
PUMPSETS Supply and delivery at site brand new board approved makes non-clong sewage submersible pump coupled to Board approved makes squirrel cage induction motor of suitable 10HP 'F' class insulatio...
Control Panel Board for pumps +APFC panel Supply, delivery and commissing at site brand new board approved make or equivalent floor mounting, free standing, cubicle type control panel board unit suita...
Servicing and commissioning: The pumpsets along with all other elecrical equipments shall be serviced and commissioned in the presence of the Engineer-in-charge of work including trail running for a p...
For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring Clamps, B&N and all other accessories...
Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.(PWD E...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Wetwell Bid doc (1) (2).docx
Tender Document • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .