Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹47.3 L
EMD Value
₹94,680
Closing Date
13 Nov 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Overhaul Division, Nasik
Aircraft Overhaul Division, Nasik
Construction of Crematorium at Indore village, Taluka-Dindori , Dist Nasik
17504
NK/FW/CSR-1606/2024-25
Works
Mig Complex - Aircraft Overhaul Divn - Nasik - Works - Contracts
₹0
₹94,680
13 Nov 2024
26 Oct 2024
26 Oct 2024
13 Nov 2024
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT OVERHAUL DIVISION, NASIK WORKS AND SERVICES DEPARTMENT
Name of work: Construction of Crematorium at Indore village, Taluka-Dindori , Dist Nasik
Tender No.:NK/FW/CSR-1606/2024-25
NIT NO. : NK/FW/541/2024-25
Estimate Value : Rs. 47.34 Lakhs
PRICE BID/ COMMERCIAL BID PART-B
Name of the Tenderer:
Sl. No Specification Unit Quantity Rate in Figs [Excluding GST] Rate in words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.
Part A- Civil works
1 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead all complete and as directed. Kg 100.00 5.18 Rupees Five and Eighteen Paise Only 518.00
2 Demolishing cement concrete of Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means in any position including disposal of material/debris off the site within 50 metres lead and stacking for further disposal all complete and as per direction of EIC. Cum 5.00 2227.96 Rupees Two Thousand Two Hundred Twenty Seven and Ninety Six Paise Only 11139.80
3 Demolishing brick work built in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. Cum 5.00 1885.61 Rupees One Thousand Eight Hundred Eighty Five and Sixty One Paise Only 9428.05
4 Dismantling GS Sheet in roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead for further disposal all complete and as directed. Sqm 64.00 150.98 Rupees One Hundred Fifty and Ninety Eight Paise Only 9662.72
5 Removing the excavated surplus soil / material / dismantled debris including loading, conveying and depositing at a place at a distance upto 1KM from starting point as directed and spreading & levelling all as directed by EIC. Cum 30.00 159.30 Rupees One Hundred Fifty Nine and Thirty Paise Only 4779.00
6 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. all complete and as directed. Note: This item will be paid only where no other item of excavation is paid. Sqm 900.00 31.26 Rupees Thirty One and Twenty Six Paise Only 28134.00
7 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift as directed by Engineer-in-charge.
a) All kinds of soil Cum 50.00 162.46 Rupees One Hundred Sixty Two and Forty Six Paise Only 8123.00
8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches, drains or like (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lifts , including getting out the excavated soil and disposal of surplus excavated soil , within a lead of 50 m all complete and as directed by EIC. Note: Soil, if any, which is required for refilling shall be stacked at site as per the directions of EIC.
a) All kinds of soil Cum 50.00 238.25 Rupees Two Hundred Thirty Eight and Twenty Five Paise Only 11912.50
b) Ordinary rock Cum 15.00 579.32 Rupees Five Hundred Seventy Nine and Thirty Two Paise Only 8689.80
c) Hard rock (Blasting Prohibited) Cum 24.00 1393.98 Rupees One Thousand Three Hundred Ninety Three and Ninety Eight Paise Only 33455.52
9 Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift as directed by EIC. Note : Earth from excavation other than BC soil and rock. Cum 80.00 179.39 Rupees One Hundred Seventy Nine and Thirty Nine Paise Only 14351.20
10 Supplying, stacking and filling of excavated murum (including royalty) by mechanical transport in foundation, trenches, plinth, sides of foundation, floors ,etc in layers not exceeding 20cm including watering and ramming/ compaction with mechnical vibrator/roller each layer for all lift all complete and as directed by EIC. Cum 110.00 641.14 Rupees Six Hundred Forty One and Fourteen Paise Only 70525.40
11 Providing and laying in position 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) including mixing, laying, curing, fininshing to level & line etc all complete as specified and as directed by EIC. Cum 70.00 7210.84 Rupees Seven Thousand Two Hundred Ten and Eighty Four Paise Only 504758.80
12 Providing Centering and shuttering for plain or reinforced cement concrete straight, horizontal, sloping as required including all cutting & waste, centering, bracing, strutting and removing the formwork after the retention period complete as specified & as directed for:
a) Footing, foundations, bases of column etc Sqm 70.00 358.92 Rupees Three Hundred Fifty Eight and Ninety Two Paise Only 25124.40
b) Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 50.00 879.84 Rupees Eight Hundred Seventy Nine and Eighty Four Paise Only 43992.00
c) Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 210.00 674.00 Rupees Six Hundred Seventy Four Only 141540.00
d) Suspended floors, roofs, landings, balconies and access platform Sqm 50.00 848.67 Rupees Eight Hundred Forty Eight and Sixty Seven Paise Only 42433.50
e) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc Sqm 10.00 771.11 Rupees Seven Hundred Seventy One and Eleven Paise Only 7711.10
13 Providing and laying in position 1:1.5:3(1 cement:1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) of reinforced cement concrete, including mixing, placing in position, compacting, vibrating, curing, finishing the exposed surface of concrete smooth/hacked complete all as specified and as directed.(MS reinforcement and form work will be paid seperately).
a) All work up to plinth level Cum 17.00 8279.17 Rupees Eight Thousand Two Hundred Seventy Nine and Seventeen Paise Only 140745.89
b) Columns, walls Cum 12.00 9933.21 Rupees Nine Thousand Nine Hundred Thirty Three and Twenty One Paise Only 119198.52
c) Beam, suspended floors, roofs, balconies, shelves, lintels, chajjas, bands, plain window sills, staircases Cum 16.00 10530.46 Rupees Ten Thousand Five Hundred Thirty and Forty Six Paise Only 168487.36
14 Providing and laying in position TMT deformed MS reinforcement of grade Fe-500D, for R.C.C. work including straightening, cutting to required length, bending, hooking, cranking, placing in position and binding with MS wire (annealed) not less than 0.9 mm Dia. or securing with clips including necessary lapping, spacers/cover blocks complete all as specified and as directed by EIC. Kg 4500.00 98.72 Rupees Ninety Eight and Seventy Two Paise Only 444240.00
15 Providing and fixing in position steel work in built up tubular (Electric resistance or induction butt welded tubes-round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. all complete as directed. Kg 1500.00 177.93 Rupees One Hundred Seventy Seven and Ninety Three Paise Only 266895.00
16 Providing & fixing in position colour coated corrugated galvalume sheet of 0.50 mm thick (total coated thickness) having high tensile strength of 550 mpa, with metallurgical coating of zinc aluminium alloy of 150 grams /Sqm (AZ 150) (both side inclusive ) conforming to ASTM -792 & AS 1397 having profile depth approximate 28mm high rib with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg for roofing / cladding/ridge including sheet shall be fastened with 40μm zinc coated or 25μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners with neoprene/EPDM washers. The sheet will have coating of minimum 20 microns of painting over corrosion inhibiting primer (min 5 micron) on top side & standard backing coat on reverse side. All penetrations and laps shall be sealed with silicon or equivalent sealants while laying the sheet. End overlap wherever required shall be minimum 150 mm & side lap are full rib as per manufacture catalogues. Sqm 120.00 616.75 Rupees Six Hundred Sixteen and Seventy Five Paise Only 74010.00
17 Providing and laying, spreading and compacting stone aggregate 90 to 45mm to WBM specifications in uniform thickness, hand picking , rolling with hand compactor/3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of creening/binding material sand to fillup interstices of coarse aggregate, watering and compacting to the required density all complete and as directed. Cum. 50.00 2878.80 Rupees Two Thousand Eight Hundred Seventy Eight and Eighty Paise Only 143940.00
18 Providing and constructing subclass 'B' Bricks , straight or curved on plan to any radius in half brick thick masonry in CM 1:4 above or below ground at any height and level using class B bricks including providing reinforcement if required and as directed by the engineer In charge, necessary scaffolding, curing complete as specified and as directed. (Brick of class designation 35kgf/cm2) Cum 40.00 8790.15 Rupees Eight Thousand Seven Hundred Ninety and Fifteen Paise Only 351606.00
19 Providing and applying 5mm thick sand faced plaster on faces of brick work in cement mortar 1:4 and/or concrete surfaces over and including a backing coat of 10mm thick in cement mortar 1:4 using fine sand, trowling, finishing to a smooth and even surface with straight edges, scaffolding, curing complete all as specified and as directed. Sqm 430.00 365.60 Rupees Three Hundred Sixty Five and Sixty Paise Only 157208.00
20 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. all complete and as directed. Sqm 120.00 895.54 Rupees Eight Hundred Ninety Five and Fifty Four Paise Only 107464.80
21 Providing and Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Sqm 430.00 165.89 Rupees One Hundred Sixty Five and Eighty Nine Paise Only 71332.70
22 Providing & applying painting with synthetic enamel paint on any surface of steel, wooden or plastered surface of approved brand and manufacturer of required colour to give an even shade : One or more coats on old work including preperation of surface remove dust, scrap with sand paper etc complete all as specified & directed by EIC. Sqm 70.00 207.08 Rupees Two Hundred Seven and Eight Paise Only 14495.60
23 Providing and laying polished Granite stone Black, Cherry/ Ruby red or equivalent in flooring, steps, etc. of required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sqm 20.00 4101.53 Rupees Four Thousand One Hundred One and Fifty Three Paise Only 82030.60
24 Providing edge moulding to 18 mm thick Granite work, marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Rmt 130.00 467.65 Rupees Four Hundred Sixty Seven and Sixty Five Paise Only 60794.50
25 Providing and fixing 25mm thick kota stone slab flooring over 20 mm (average) thick cement mortar 1:4 base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete and as directed. Sqm 70.00 1783.15 Rupees One Thousand Seven Hundred Eighty Three and Fifteen Paise Only 124820.50
26 Providing and fixing 20mm thick kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete and as directed. Sqm 5.00 2155.15 Rupees Two Thousand One Hundred Fifty Five and Fifteen Paise Only 10775.75
27 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., all complete and as directed. Sqm 5.00 1003.63 Rupees One Thousand Three and Sixty Three Paise Only 5018.15
28 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. all complete and as directed.
(a) 25mm dia. RM 5.00 428.12 Rupees Four Hundred Twenty Eight and Twelve Paise Only 2140.60
29 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) all complete and as directed.
(a) 25mm dia. Each 1.00 569.66 Rupees Five Hundred Sixty Nine and Sixty Six Paise Only 569.66
30 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
a) 15mm dia. RM 5.00 223.97 Rupees Two Hundred Twenty Three and Ninety Seven Paise Only 1119.85
b) 25 mm dia RM 50.00 325.29 Rupees Three Hundred Twenty Five and Twenty Nine Paise Only 16264.50
31 Providing and fixing PTMT bib cock of approved quality and colour, 15mm nominal bore, 86 mm long, weighing not less than 88 gms all complete and as directed. Nos 6.00 114.96 Rupees One Hundred Fourteen and Ninety Six Paise Only 689.76
32 Providing and fixing 15mm dia, 86mm long PTMT stop cock of approved quality and colour all complete and as directed. Minimum weight of stop cock shall not be less than 88 gms Nos 3.00 108.46 Rupees One Hundred Eight and Forty Six Paise Only 325.38
33 Writing Letters --- Lettering with black Japan/white paint of approved brand and manufacture all complete and as directed. Nos 380.00 5.63 Rupees Five and Sixty Three Paise Only 2139.40
34 Providing, fabricating ,hoisting & fixing in position structural steel work in single section, fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate red oxide steel primer all complete and as directed. Kg 751.00 107.41 Rupees One Hundred Seven and Forty One Paise Only 80664.92
35 Providing and laying non-pressure 300 mm dia NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. all complete and as directed. RM 15.00 910.04 Rupees Nine Hundred Ten and Four Paise Only 13650.60
36 Providing and laying 60mmthk factory made chamfered edge Cement Concrete paver blocks M-35 grade in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge Sqm 200.00 957.04 Rupees Nine Hundred Fifty Seven and Four Paise Only 191408.00
37 Providing and fixing in position C.I. Crematorium Pyre, bearing Temp.900 degree Celsius , minimum weight 540 kg suitable for I.W.C. to be fixed at least 6 inch into the ground/concrete bed prepared, pyre size 2.00 meter long , 1.00 meter wide and 1.30 meter height of perforated plate. made up of Cast Iron Alloy & supported on mild steel channels, angles, etc. all complete as specified and directed by EIC.( Bed concrete will be paid seperately) Nos 1.00 54179.00 Rupees Fifty Four Thousand One Hundred Seventy Nine Only 54179.00
38 Supply & Planting plants and shrubs, including digging of pits of size 0.30x0.30x0.30m an as filling back, removing unwanted material to outside of that perticular garden site including stacking (if require) and watering after planting.of plants and shrubs.
(a) Areca-palm 4-5ft height Nos. 20.00 267.09 Rupees Two Hundred Sixty Seven and Nine Paise Only 5341.80
(b) Ashoka - 6 to 7ft height Nos. 20.00 211.54 Rupees Two Hundred Eleven and Fifty Four Paise Only 4230.80
39 Supply and Installation of Precasted RCC Water tank of 3000 litre capacity completed all as specified & directed by EIC. Nos. 1.00 42218.00 Rupees Forty Two Thousand Two Hundred Eighteen Only 42218.00
40 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50 x 50 mm made of G.I. wire of dia 4 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Sqm 180.00 931.55 Rupees Nine Hundred Thirty One and Fifty Five Paise Only 167679.00
41 Testing of soil for SBC by Direct Shear Test as per IS-2720, at any locations of CSR projects in Nashik district. Excavation will be paid seperately under relevant item of excavation. Nos. 4.00 6110.50 Rupees Six Thousand One Hundred Ten and Fifty Paise Only 24442.00
Part B- Electrical works
42 Supply And Installation Of SPN 12 Way, Double Door, Distribution Board (D.B.) Make: Siemens / L & T / ABB / C&S /Polycab/Legrand/Standard NOS 1.00 2118.81 Rupees Two Thousand One Hundred Eighteen and Eighty One Paise Only 2118.81
43 Supply And Installation Of 63 Amp., DP MCB, Breaking Capacity 10KA, Make: Siemens / L & T / ABB / C&S /Polycab/Legrand/Standard NOS 1.00 482.34 Rupees Four Hundred Eighty Two and Thirty Three Paise Only 482.34
44 Supply And Installation Of 6 A To 32 Amp.,Breaking Capacity 10KA, SP Make: Siemens / L & T / ABB / C&S /Polycab/Legrand/Standard NOS 10.00 234.31 Rupees Two Hundred Thirty Four and Thirty Paise Only 2343.05
45 Supply And Installation Of 16 Amp., DP MCB, Breaking Capacity 10KA, for control at each class room / office / toilet / hall etc. Make: Siemens / L & T / ABB / C&S /Polycab/Legrand/Standard NOS 2.00 600.41 Rupees Six Hundred and Forty Paise Only 1200.81
46 Supply of materials & carry out point wiring (for fans, lights, etc.) using “HAVELLS / ANCHOR / FINOLEX / POLYCAB / TORRENT/R R KABLE” make 1.5 Sq.mm. stranded copper conductor, PVC insulated wire & 1.0 Sq.mm copper earth wire, “PRECISION / MODI / FINOLEX / POLYCAB / PRESSFIT” make PVC conduit / casing capping, “ANCHOR / M.K / LEON/ L & T/Crabtree" make 6A modular switch, socket, modulr metal flush box, modular surface plate, ceiling roses etc. Note: 1) Measurement shall be “point wiring” wise and one switch controlling one point shall be counted as one point. 2) Switch & socket installed on same board will be treated as a half point. 3) This may be a conceal-wiring work or surface wiring work. NOS 15.00 1342.68 Rupees One Thousand Three Hundred Forty Two and Sixty Seven Paise Only 20140.17
47 Wires / cable for circuit/submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required. 2x2.5 sq. mm + 1x1.5 sq. mm earth wire. Wire / Cable Make: HAVELLS / ANCHOR / FINOLEX / POLYCAB / TORRENT/R R KABLE M 30.00 213.25 Rupees Two Hundred Thirteen and Twenty Five Paise Only 6397.63
48 Supply of materials & carry out point wiring using HAVELLS / ANCHOR / FINOLEX / POLYCAB / TORRENT/R R KABLE make 2.5 Sq.mm. copper conductor, PVC insulated wire & 1.5 Sq.mm copper earth wire, PRECISION / MODI / FINOLEX / POLYCAB / PRESSFIT make PVC conduit / casing capping, “ANCHOR / M.K / LEON/ L & T/Crabtree" make 16A, 3 module, modular switch, socket, modular metal flush box, modular surface plate etc. Note: 1) Measurement shall be “point wiring” wise. 2) This may be a conceal-wiring work or surface wiring work. NOS 2.00 323.09 Rupees Three Hundred Twenty Three and Eight Paise Only 646.17
49 Supply & Laying Of XLPE Insulated,Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 V Grade, 4 Core X Cross Sectio Area 16 Sq.Mm. (Execution as per site requirement.) Make: HAVELLS / ANCHOR / FINOLEX / POLYCAB / TORRENT/ RR KABLE M 100.00 183.05 Rupees One Hundred Eighty Three and Five Paise Only 18305.08
50 Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. On pole or wall with the help of necessary fixtures. Make: Bajaj/ Crompton / Havells / Philips / Syska. NOS 3.00 3562.71 Rupees Three Thousand Five Hundred Sixty Two and Seventy One Paise Only 10688.14
51 Supply and installation of LED batten, 22 W / 24 W, with all fixing material like screws, clips etc. Make: Bajaj/ Crompton / Havells / Philips / Syska. NOS 10.00 500.00 Rupees Five Hundred Only 5000.00
52 Cutting chase, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 girth. M 5.00 337.29 Rupees Three Hundred Thirty Seven and Twenty Eight Paise Only 1686.44
53 Earthing with GI earth plate 600mm X 600mm X 6mm thick, including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc. with charcoal/coke and salt or bantonite powder as required. NOS 2.00 6838.78 Rupees Six Thousand Eight Hundred Thirty Eight and Seventy Seven Paise Only 13677.56
54 Supply and installation of Switch Fuse Unit (SFU) with sheet steel enclosure 500 V, 3 phase with HRC fuses complete with Neutral link of capacity 63 Amps. (Suitable for external / wall mounting.) Make: Siemens / L & T / ABB / C&S /Legrand/Standard Nos 1.00 2877.56 Rupees Two Thousand Eight Hundred Seventy Seven and Fifty Five Paise Only 2877.56
Sub-Total (Excluding GST) Rupees Forty Lakh Eleven Thousand Nine Hundred Sixty Nine and Nineteen Paise Only 4,011,969.19
The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Basic Amount Put to Tender Select Above or Below Percentage in Figures [Excluding GST] Amount
Tenderer's Quote (Excluding GST) 4011969.19 BELOW % 4,011,969.19
Add 18% GST Rupees Seven Lakh Twenty Two Thousand One Hundred Fifty Four and Forty Five Paise Only 722,154.45
Grand Total (Including GST) Rupees Forty Seven Lakh Thirty Four Thousand One Hundred Twenty Three and Sixty Four Paise Only 4,734,123.65
Note: (i) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess (if any), Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.
WARNING: PLEASE ENTER PERCENTAGE QUOTE
HINDUSTAN AERONAUTICS LIMITED
AIRCRAFT OVERHAUL DIVISION, NASHIK
Pre-Qualification Profile
Tender Ref No. or Contract No.: NK/FW/CSR-1606/2024-25
Name of Work: Construction of Crematorium at Indore village, Taluka-Dindori , Dist Nasik
Estimated Amount in Rs. Lakhs: 47.34
Tender Notice no.: NK/FW/541/2024-25
Name of the Individual / Firm / Company: * Mandatory
Sl.No Description Details Remarks
A Essential/ Prequalification Criteria
1.1 Annual Turnover: Average annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 of the previous financial year /Accounting year [ should not be less than 30% of Amount put to tender] i.e Rs. In Lakhs 14.20
Financial YEAR Turn over (Rs. In Lakhs) Remarks
2020-21 Audited copies and Audit report by CA with UDIN of financial documents for last three (3) years Viz.Balance sheet, P &L account, Supporting Schedules and notes to account.
Average Annual Turnover of last Three Financial Years Rs. 0.00 Not meeting eligible criteria
1.2 Solvency : Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of tender Submission.( Should not be less than 40% of the estimated cost i.e Rs. In Lakhs) 18.94
Name of Bank & Branch Issued Related Document to be Uploaded to eProcurement Portal.
Date of Issue [DD-MM-YYYY]:
Value (Rs. In Lakhs) Not meeting eligible criteria
1.3 Experience:
Experience of having successfully completed similar works (As per Annexure-A of tender notice.) during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. OR (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. OR (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Completed similar works during last 7 years You are Not Eligible
Work No I Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal.
Brief Description of Work:
Completed value of Work in `Lakh:
Date of Commencement of Work [DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
You are Not Eligible
Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal.
Brief Description of Work:
Completed value of Work in `Lakh:
Date of Commencement of Work [DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal.
Brief Description of Work:
Completed value of Work in `Lakh:
Date of Commencement of Work [DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
1.4 GSTIN Registration Number. Registration certificate to be uploaded
1.5 ESIC Registration Number Registration certificate to be uploaded
1.6 EPF Registration Number Registration certificate to be uploaded
1.7 Earnest Money Deposit (EMD) Related document to be scanned and uploaded to e-procurement portal and original one to be submitted to the address mentioned in NIT
1.8 License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works) Related Document to be Uploaded to e-procurement portal. i.e License or undertaking
2.1 ( C) (i) Undertaking Annexure-L Related Document to be Uploaded to e-procurement portal.
2.1 Documents to be uploaded along with tender
2.1.1 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., Related Document to be Uploaded to eProcurement Portal.
2.1.2 Address for correspondence
2.1.3 Contact details
Contact person name
Ph. No. with STD code
FAX No. with STD code
2.1.4 PAN No. Related Document to be Uploaded to eProcurement Portal.
2.1.5 I.T Returns for past 03 years (Assesment Year)
2021-22 Related documents to be uploaded in eprocurement portal.
2.1.6 Details of person holding the power of Attorney.
Name Related documents to be uploaded in eprocurement portal.
Ph. No. with STD code
2.1.7 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal and hard copy of original ECS and cancelled cheque to be submitted to address mentioned in e-tender notice for refund of EMD or payment etc.
Name of the Bank
Type of Account
3.0 Acceptance by party for Scope of work as per BOQ and Tender terms & conditions Accepted
4.0 DECLARATION
a The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 146) including price bid do hereby accept all the terms and conditions laid down Accepted
b I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Accepted
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Etender_notice.pdf
TENDER_DOCUMENT • 0.18 MB
PriceBid.xlsm
TENDER_DOCUMENT • 0.08 MB
Checklist.pdf
TENDER_DOCUMENT • 0.09 MB
Prequalification.xlsm
TENDER_DOCUMENT • 0.02 MB
AnnexureL.pdf
TENDER_DOCUMENT • 0.06 MB
ECSDetailsForm.PDF
TENDER_DOCUMENT • 0.16 MB
Tender_Document1606.pdf
TENDER_DOCUMENT • 1.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .