Provision of Street light in front of Main Building pathway premises in CSIR-CLRI

Amount

Provision of Street light in front of Main Buidling pathway premises in CSIR-CLRI.

MV CABLE LAYING IN DIRECT GROUND: Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation,sand cuhioning,protective covering and refilling the trench etc.as required. Upto 35 sq. mm

DWC PIPE LAYING: Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..in the existing trench,complete as required. Make: GEMINI/TELEREX/SUPREME 63mm dia (OD-63mm & ID-51mm nominal)

EARTH WIRE FOR POLE: Supplying and laying 6 SWG G.I wire at 0.50 meter below ground level for conductor earth electrode,including connection/ termination with GI thimble with necessary earthing accessary etc., as required.

CABLE END TERMINATION: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 x 16 sq. mm (28 mm)

G.I. PIPE LAYING: Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and floor/road cutting and finishing the with PCC in original condition and wherever required based on site condition as directed and required by site Engineer etc. Make: Jindal/Tata or any ISI make 50 mm dia

DISMANTLING OF EXISTING STREET LIGHT POLE : Dismantling of existing pole/street light standard/strut embedded in cement concrete foundation, handed over to department in without any damage,etc.as required.

PAINTING OF STREET LIGHT POLE: Painting for existing Street light pole(mild steel type) upto 6 metre with one or more coat of Aluminium paint of approved brand and manufacturer to give an even shade existing pole after cleaning using sand paper etc.as required.

POLE ERECTION: Erection of street light pole in cement concrete foundation 1:1 1/2:3 (1 cement : 1 1/2 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including ceaseing & shuffling complete and making concrete pillar above the ground level up to 1.5' x 1.5' x 2' height including excavation and refilling, finishing neatly with cemear mortar 1:5 (1 cemear : 5 fine sand) with materials involved, site repairs required, miscelleaneous items involved with holding clamps,bolts,nuts,washer,painting with exterior emusion with two or more covers with bure exterior primer (celous: As decided by CIRF) complete etc; in all leads & lifts etc; and all as required to site condition and as directed by the Engineer-In-Charge. Upto 8 meter suitable for site requirement

PROVISION OF LIGHT POLE: Providing and fixing of 7 mtr Octagonal street light pole single arm,bottomside 150mm dia and top side 70mm dia,thickness 3mm G.I. pipe with base suitable bolt,nut,washer,painting,the job including cable terminal box with connection 2.5sqmm FRLS PVC insulated copper conductor and testing,etc.as required. Make: HITECH POLE/DHAKSHAN POLES/KANAKKA DURGA POLES/ORIENT POLES/CHENNAI POLES 7 METRE-SINGLE ARM

PROVISION OF G.I STREET LIGHT SINGLE ARM BRACKET: Provision of G.I street light single arm arch/Straight bracket with suitable size of existing pole including painting etc.as required by directed by site requirement. Make: HITECH POLE/DHAKSHAN POLES/KANAKKA DURGA POLE/SORIENT POLES/CHENNAI POLES

SUPPLY OF POST ANGLED LED FIXTURE: Supply,Installation,testing and commisioning of prewired,LED post angled type fitting with 60W LED lamp.The job including supplying and fixing of suitable size bracket with bolt,nut,washer an existing arm,making the connection with 2.5sqmm FRLS PVC insulated copper conductor,single core cable to smc cable terminal box.etc,as required. Make: Crompton/Philips/ Havalls.

SUPPLY OF ALUMINIUM UG CABLE: Supplying of 4 core 16 sqmm PVC insulated,XLPE,sheathed and aluminium armoured aluminium 1100V grade UG cable conforming to IS 1554 and submit with necessry test certificate etc..,as required. Make: POLYCAB / Finolex/ Havells

SMC BOX: Supplying and Installing of SMC box with 1 Set 4Way 125A suitable connector ,1No single pole MCB with fixing arrangment on the existing light post,giving connection etc..,as required including suitable GI/ brass coated clamps. Make: SINTEX/ELMAX/L&T

MICCROTECH ENGINEERING CORPORATION

J.K ENGINEERING ASSOCIATES