SHIFTING OF HT LINES AT 107 AD REGT AT PARADE GROUND BHARATPUR MIL STN

Amount

Excavation in trenches, n.exc 1.5 Mtr wide and n.exc 1.5 Mtr in depth for foundation / laying of cable and getting out in any type of soil complete all as specified and directed.

Excavation in trenches exc. 1.5 M wide but exc 1.5 M in depth for pipe line /pole etc in soft/loose soil getting out and leveling of bottom surface to required level complete all as specified and directed

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick complete all as specified and directed

Removing of excavated soil to a distance n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.

Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches complete all as specified and directed. Note :- Punning thickness shall be measured.

M&L for brick protection with sub Class ‘B’ bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as specified and directed.

Boring of holes under road, pavement, hard standing by trenchless technology using necessary machine for laying under ground pipe upto 100 mm dia complete all as specified and directed. Note : GI pipe shall be measured and paid in concern item.

Supplying, Erecting and fixing steel tubular swaged poles complete with mild iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-64 (12 metres long) and providing 3 Nos of 30 cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles in yellow paint over black painted back ground at a height of 2 Mtr from bottom of pole with 5 cm large bold letters 2” wide, compete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40mm grade stone aggregate in base & foundation of pole including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in coping of existing /new poles/ foundation for poles, struts, posts etc including necessary form work, finished the exposed surfaces fair and even without using extra cement complete all as specified and directed.

M&L cross arms, bracing, support clamps and back plate fabricated from structural steel sections including nuts bolts washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat one under coat and one finishing coat of aluminium paint complete all as specified and directed.

M&L for anti climbing device, comprising 2.24 mm dia galvanised steel 2 strand barbed wire with 2.00 mm dia barbs wrapped spirally round poles to a length of 0.50 to 1.0 metre clamped and properly secured or as ordered complete all as specified and directed Note:- Clamps measured separately.

M&L in repair ACSR over head Aluminium conductor steel reinforced of any size all as specified and directed including stringing through RCC/Steel tubular poles, fixing on insulators, jumpering with aluminium binding wire etc complete all as specified and directed.

M&L for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enameled white, with letters figures and conventional skull and fixed with MS clamps, bolts and nuts of approved size for HT 25x20 cm size complete all as specified and directed.

M&L non linear resistor type surge arrestor (lightening arrestor) confirming to IS 3070 (Part I) having voltage rating 12KV, rated frequency 50HZ, nominal discharge current 10KA (heavy duty) complete with all fittings, suitable for 11 KV, 3 phase earthed distribution system complete all as specified and directed.

S & F 11 KV disc type insulator, porcelien, vitreous 145mm high and 225mm dia ball and socket type white, brown or green insulators two in series type assembly for tension with clamps for conductors with working pressure 11000 volt complete all as specified and directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 120 sqmm 3 core complete all as specified and directed.

Supply and fix cable jointing kit for 11 KV grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, AI conductor cable of size 120 sqmm complete all as specified and directed.

Supply and fix cable jointing kit for 11 KV grade cable for out door termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, AI conductor cable of size 120 Sqmm complete all as specified and directed.

Supply, installing, testing and commissioning of 11 KV Air break, gang operated, triple pole outdoor type, rotating type, mechanically operated, mounted on insulators and steel frame with operating mechanism worked from ground level with 09 Nos insulators outdoor type triple pole suitable for orizonal mounting type provided with locking arrangements consisting of Ms channel HT post type insulator high pressure heavy lined copper allow contact assembly suitable for 200 amp, including air break switch suitable for 11 V, 200 Amps mounted on 06 insulators with drop out fuse unit operating rod 20mm dia GI Medium grade pipe complete all as specified and directed.

S&L pipe galvanised medium grade complete including fittings of 80 mm bore complete all as specified and directed.

ONKAR ENGINEERS CONTRACTORS (BID ID -3109134)