CRC-DTRD-175- Dispur Narengi PWD Road

Amount

Cleaning and removal of rubbish, debris including dust etc up to a distance of 5.00 km outside the periphery of the area as directed by the department. (Road surface)

Sand Filling in Foundation Trenches as per Drawing & Technical Specification

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place at OMC,and complete as per cl. 401

Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification and compacting to the required density etc. as per Technical Specification Cl 405 Grading - II materials

Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification and compacting to the required density etc. as per Technical Specification Cl 405 Grading - III materials

Milling of Bituminous Pavement Surface: Cold milling of existing bituminous layers upto the required depth by mechnical means using milling machine.

Removal of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor, Including cost of testing of materials at site and laboratory as directed by the deptt.)

Bituminous Concrete (Providing and laying bituminous concrete With 100-120 TPH batch type hot mix plant producing bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, as MoSRT& H cl. no.509. complete in all respect (including carriage of mixed materials up to 100 Km initial lead from mixing plant )(lncluding cost of testing of matenals at site and laboratory as directed by the deptt.) BC Milling

Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied lass beads as per IRC:35 MoSrt&H s specifications

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Providing and laying of interlocking concrete block pavement (ICBP) conforming to IS:15658-2008 including all lead and lift complete as per 80 mm thick interlocking precast block having compressive strength 40N/ sq.mm

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface

Tapash Paul