REPAIR TO PATH, FLOORING, DRAIN AND OTHER MISC BR WORK IN THE AOR OF AGE BR-II UNDER GE(WEST)PATHANKOT

Amount

Demolition of brick work built in cement mortar,PCC bed blocks of mild steel posts, PCC coping/RCC Jalli etc complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate ) as in foundation filling mass concrete complete all as specified and directed.

M&L for brick Work in CM 1:6 with Sub Class 'B burnt clay Bricks, using old size bricks, straight or curved on plan exc 6Mtr mean radius all as specified and directed.

All as per Srl item No. 3.00 here-in-before but except bricks retrived serviceable bricks from demolition

M&L for Brickwork with burnt clay old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

All as per Srl item No. 5.00 here-in-before but except bricks retrived serviceable bricks from demolition

Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on any faces of brick/concrete surfaces finished even and smooth without using extra cement.

M&L for preparing new plastere or unplastered wall surfaces and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

M &L for preparation of old plastered or unplastered ,old/un decorated surfaces of brick/concrete/stone wall surface by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of cement base Paint complete all as specified and as directed.

M&L for preparation of new concrete surfaces kerb stone/other concrete surfaces and plaster surfaces and applying two coat of Epoxy flooring paint (high quality) as per manufacturer instruction and as directed by Engg-in-charge.

M&L for complete removal of old concrete surfaces kerb stone/other concrete surfaces and plaster surfaces and applying two coat of Epoxy flooring paint (high quality) as per manufacturer instruction and as directed by Engg-in-charge.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick above or below ground level.

M&L for hardcore of Broken stone or boulders n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in , sub base, and surface rough finished complete all as specified and as directed.

M & L for Machine pressed precast concrete interlocking paver block glossy colored finish (50% red & 50% yellow) shape and size approved by GE, confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey Cement and no pigment including 25mm thick sand cushioning bed complete all as secified and directed.

M & L for Machine pressed precast concrete interlocking paver block glossy colored finish (50% red & 50% yellow) shape and size approved by GE, confirming to IS 15658-2006 of 80 mm thickness M-405 Grade with grey Cement and no pigment including 25mm thick sand cushioning bed complete all as secified and directed.

M&L for Precast cement concrete solid block Kerb stone type casted in PCC 1:2:4 type B-1 using (20 mm graded aggregates) set in CM 1:4(size of precast concrete block as directed by GE) complete all as specified and directed.

M&L for 75 mm thick PCC as in plinth protection / apron type C-2, 1:3:6 (40 mm graded agg) finishing cement surfaces even and smooth without using extra cement and spike rolling complete all as specified & directed.

Demolition of cement concrete (unreinforced) in any description or in any position not otherwise provided for

Dismantling posts or struts (Steel or RCC, ) any section embedded in concrete, including taking out embeded portion and making good disturbed ground and preparing post holes for providing new posts in any type of soil complete all as specified and directed.

M&L PCC 1:3:6 Type C-2 (using 40mm graded stone aggregate) as in filling, foundation and mass concrete complete all as specified and directed by Engr-in-charge.

M&L PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in copings, kneelers , kerbs, water troughs, and the like weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-charge.

Dismantling Wrought Iron or Mild Steel Work of any description, complete all as specified and as directed.

S&F mild steel work, such as post and struts in fencing incl drilling holes, notching for wire etc,flate iron fillets (for securing wire mesh etc ) and similar work conforming to Fe - 290 Gde E-165, complete all as specified and directed.

Dismantling of barbed wire fencing

S&F galvanized to strands, steel brabed wire 2.24mm dia barbed with 2mm dia barbes at 75mm spacings and straining and fixing to any type of standard rails including securing or taying at croses with and provision of galvanized mild steel wire.

All as per srl item No. 27 here-in-before but fixing only except barbed wire retrived from item No. 26

Dismantling of concertina fencing wire coil of any type in any position and in any height

S&F Punched tape concertina coil fencing with concertina coil of 600 mm dia 10 metre openable length, having 50 nos rounds per 6 metre length, spring core wire (2.5 mm thick) of high tensile strength of 165kg/sq. mm having weight 43.478 gm/metre incl securing or tying at crossings with provision of galvanised mild steel wires, staples or pins etc complete all as specified and directed

All as per srl item No. 30 here-in-before but fixing only except concertina coil retrived from item No. 29

Preparation of new steel surface of any description exc. 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer.

M&L for two coat of synthetic enamel paint on old treated steel surfaces of any description not otherwise described over 10cm width or grith including preparation of old surfaces complete all as specified and directed by Engr-in-charge

Dismantling floor, hearth or wall tiling/granite slab including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises

M&L for cement concrete tile 30 cm x 30cm x 25 mm thick machine prerssed set and jointed and pointed in neat cement slurry in floors with grey cement and pigment , coloured made in PVC mould with vibration process prelaminated for glossy finish over 15 mm thick screed bed in CM 1:4 all as directed by Engr -in charge.

M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete al as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles as directed ny Engr-in-charge.

M&L for 10mm thick backing coat in CM 1:4 finished even and fair to receive other treatment as tiles/granite etc.

M&L for glazed ceramic joint less coloured/Stone finish/digital/printed/High lighter tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile,. as specified or as directed by Engr-in-Charge.

M&L for granite stone slab 16-18 mm thick machine cut , in skirting /dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as spd and directed

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for RCC structures including cutting of reinforcement as required to facilliate demolition.

M&L for providing Precast Cement Concrete Type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs (for manholes, drains etc) , water troughs and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia .

All as srl item no 42 here-in-before but 6 to 8 mm dia

S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors including taking out old PVC pipes of any description complete all as specified and directed.

Demolition of RCC Jalli of any description complete all as specified and directed.

M&L Providing precast RCC Jalli 35 mm thick(Measured solid), including all moulding type B-0 1:2:4 using 12.5mm graded stone aggregate set in cement mortar 1:4 complete all as specified and directed.

M&L for broken glass coping on top of wall in CM 1:3 including 20mm thick cement rendering complete all as spd and directed.

Taking out bushes at any height of the bldg and necessary scaffolding digging out roots old brick walls and filling holes with CM 1:3 or PCC 1:2:4 type B-1 and removing of roots/bushes to a distance nexc 50 M and clearing the sites complete all as directed

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 44,800.00 and any other reduction if any from quoted amount.

OMKAR SHARMA AND CO

M/S Raghuvanshi Builders

GANDOTRA CONSTRUCTION CO

M/S CANTILEVER ENGINEERS

V K Sharma and Sons

m/s pankaj soni

JP AND CO.

BUILDEX CONSTRUCTION CO

M/s. Ram Nath Conatructions