PROVN OF 01 X RAMP WITH OVERHEAD SHED ALONGWITH HARD STANDING PARKING AREA AT LRW FOR REPAIR AND SERVICING OF VEH OF ARMY AVN SQN (UH) IN MANASBAL MIL STN UNDER GE 970 EWS

Amount

Excavating in trenches, not exceeding 1.5m wide & not exceeding 1.5m in depth in soft and loose soil for foundation etc, or for shafts, wells, cesspits, manholes, pier holes, etc, not exceeding 10Sqm on plan & getting out in soft/ loose soil complete all as specified and directed

Excavating over areas, not exceeding 1.5m deep & getting out in soft/ loose soil complete all as specified and directed.

Surface excavation not exceeding 30cm deep & averaging 15 cm deep and getting out in hard/ dense soil complete all as specified and directed.

M&L for hard core of guage not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for PCC foundations, fillings and mass-concrete type D-2 (1:4:8), (using 40mm graded crushed stone aggregate), complete all as specified and directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F TMT steel bars 5mm dia and over upto including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, bending with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality, complete all as specified and directed.

M&L for RCC (Nominal mix) 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roof, landing, blaconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radiu, built in CM (1:6) complete all as specified and directed.

M&L rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick (Internally) including finished surface even and smooth surface (without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces in two layers including mixing of 3% WPC by wt of cement in 2nd layer and finished even and smooth surface without using extra cement, complete all as specified and directed. Note : WPC shall be measured and paid for separately.

Supply only integral waterproofing compound complete all as specified and directed.

M&L applying three coats of white wash on newly plastered surfaces of wall including preparation of newly plastered wall surface complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete flat, complete all as specified and directed.

S&F rotational moulded polythylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position all as specified in SSR part I, 1000 ltrs capacity complete all as specified and directed.

S&F ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both end for iron pipe, complete all as specified and directed.

S&F 20mm dia GI tubing, medium grade, with all fitting and fixed complete to walls or laid in floors complete all as specified and directed.

S&F 15mm dia GI tubing, medium grade, with all fitting and fixed complete to walls or laid in floors complete all as specified and directed.

M&L sand filling under floors or in foundation including watering & consolidation complete all as specified and directed.

M&L for machine pressed precast concrete chemical treated interlocking paver blocks of any shape and size, confirming to IS-15658 : 2006 of 100mm thick M-50 Grade, complete all as specified and directed.

M&L 100mm thick PCC type D-2 (1:4:8), (using 40mm graded crushed stone aggregate) as in subbase, complete all as specified and directed.

M&L 75mm thick PCC type C-2 (1:3:6), (using 40mm graded crushed stone aggregate) as in subbase/ flooring, complete all as specified and directed.

M&L PCC in surface channels and drains type B2 (1:2:4) (using 40mm graded crushed stone aggregate), complete all as specified and directed.

M&L PCC in coping or mud stops, rounded or chamfered on edges type B0 (1:2:4) (using 12.50mm graded crushed stone aggregate), complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers not exceeding 25cm in soft/ loose soil complete all as specified and directed

Removing excavated soil not exceeding 50m & depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling & ramming earth/ broken rubble mixed with earth around, in layers not exceeding 25cm, watering & removing surplus soil to a distance not exceeding 50m & making good surface in soft/ loose soil, complete all as specified and directed.

S&F steel work in tubular trussess including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall fixed with self screws or J/L hook, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall fixed with self tapping screws or J/L hook, complete all as specified and directed.

M& for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide primer complete all as specified and directed.

MANZOOR AHMAD SHEIKH (BID ID -3196267)

M/S MEGA BUILDERS (BID ID -3192303)

G N Constructions (BID ID -3198314)

M/S B A Traders (BID ID -3198489)