WBPWD/EE/PMED/NIQ-50/2024-25

Amount

Supply & delivery of 8 Mtr. Octagonal Poles with top dia 70 mm, botom dia 130 mm, thick 3 mm, base plate 200 x 200 x 16 mm as per manufacture design to suitable for wind speed as per IS:875 A, Hot dip GI octagonal pole fabricated from HT steel confirming to BS EN 10025, S355JQ along with 4 Nos. M20 x 600" 'J' type foundation bolts.Material grade of shaft shall be of S355JO/JR as per BSEN 10025 or EquivalentIS: 2062 grade E350 (BR) B) Materials grade of Base Plate shall be E250(BR) as per IS:2062 C) Galvanization as per BSEN ISO:1461 [ Make – Utkarsh/Bansal/Jindal/Transrail]

Supply & fixing 48.3 mm dia outer dia medium gauge 1.5mtr long Standard single arm bracket incl.proper fixing arrangement with the pole by bolt,nuts and washers as per direction of EIC.

Single arm bracket

double arm bracket

Supply and fixing of appropriate radius circular bracket suitable for fixing 4Nos. LED Fittings as per direction of EIC.

Erection of pole by construction of suitable Shallow foundation with M-16 grade concrete for Pole considering soil bearing capacity (SBC) 10T/sq. mtr. at 2 Mtr. depth with all materials and labour payment made as per PWD civil schedule & as per direction of EIC. Erection of Pole by using of lifting equipment like hydra etc. and fixing of foundation bolts , anchor plate etc. with necessary arrangement & Testing & commissioning of all electrical equipment of Pole like led fixtures, MCBs Terminal etc. with necessary connection

S&F sintex type PVC box, clip type locking arrangement with necessary clamping arrangement for fixing on the pole comprising with (i) S&F L&T make MNX 16 A DP power contactor with suitable add on block with necessary connection-01 Nos. (ii) S&F 240V,50 HZ analog/digital time switch-01 No. (iii) Bypass switch-01 No. (iv) 240V, 16A DP MCB including necessary connection by required size Cu wire

Supply & delivery of outdoor luminaire ( IP 66) with pressure die cast housing with toughened glass and high power LEDs with secondary optics , 10KV SPD, THD < 10%, PF> 0.95, BIS approved , minimum LPW: 110 lumen/w and minimum system output 13200 lumen suitable for use with 230 Volt, 50Hz. [Make: Philips/ Crompton/Wipro]. [5 Years Warranty on this item]

Supply & delivery of 150 W LED floodlight made up of pressure die cast aluminium housing with integrated IP lens and SMD LEDs with IP66 protection.CRI> 70, CCT- 5700K, System efficacy≥120 LPW, 10KV SPD [Phillips/Bajaj//Lighting Technology/Crompton] [5 Years Warranty on this item]

S&F of 1.5 mtr long 80mm dia GI pipe (ISI-M) pole with 150x150x4mm MS base plate incl. S&instln. Of muffing 600x600x760mm above roof neatly cemented finish (3mm thick) suitable for alkathene pipe/polythene pipe entry incl. S&F 25cmx25cmx25cm SS loop box (16SWG) incl.drilled hole in pole as per GS incl. painting with synthetic enamel paint(2coat) on 1 coat of red oxide.

Supply & Fixing MS box with hinged type front door and threaded locking arrangement in one side with 16 SWG CRCA MS Sheet of suitable size fixed in MS Flat iron frame on wall as per direction of EIC. The box should comprising following accessories. i) S & F single dial 24 Hrs Digital Timer. Make - L&T (AUTS02DIG00) - 1 Nos. ii) S & F 40 A Capacity TP Power Contactor incliding NO/NC auxiliar contact Make - L&T ( MNX 40 ) - 1 Nos iii) S & F 230V, 6A, AC troggle switch for bypass arrangement.- 1 No. iv) S & F 415 V, 40A ,FP MCB ( Make L & T /Legrand ) - 1 Nos v) S & F LED Indication Lamp for ON/OFF ( Make L & T /ABB) - 2 Nos vi) S & F 4 way MS Stud ( bolt type) bakelite molded terminal with spring washer & nuts as required ( for Incoming Line termination )- 1 Nos. The complete arrangement of Timer DB must have wiring by PVC insulated suitable 4 sqmm copper wire ( For Power Line) & 1.5 sqmm control wiring ( For Control Line) with copper socketing at the wire end portion.

Supplying of 2 core 10 sqmm 1.1 KV Grade XLPE Aluminium conductor, PVC sheathed, armoured cable conforming to IS 7098, of earthed system of following size. [ Make : Gloster / Polycab / Havells / RR Kabel ]

Supplying & fixing medium gauge 32 mm GI Pipe ( ISI-Medium)Protection with necessary fittings and jointing metarials as required

Laying of cable above on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of one cable sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand

Laying of above Cable through existing GI pipe as per direction of EIC

Supply and fixing compression type gland for 2 core 10 sqmm cable complete with brass gland brass ring and rubber ring for dust and moisture proof entry of XLPE/PVC armoured cable.

Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials for 2core 10 sqmm cable.

Inter connection of compound light fittings by 3 x 1.5 Sq. mm. PVC insulated copper wire (Finolex/Polycab/Havells) through 19 mm polythene pipe from loop box inside the pole to light fittings through pole & bracket with Pricision MMS PVC pipes as per direction of EIC

Earthing with 50 mm dia GI pipe (ISI-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts below the ground level. by ISI-Medium GI pipe.

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil.

Connecting the equipments body to earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

Fixing only outdoor luminaries with suitable tie clamps and MS plate or appropriate acessories for mounting on wall/ Pole/Tower or similar structure as per direction of EIC.

M/S JOGMAYA ENTERPRISE (BID ID -5620587)

MAHESWAR ELECTRICAL INDUSTRIES (BID ID -5632169)

MAA NACHINDA ELECTRIC (BID ID -5631679)

CHANDIMATA TRADERS (BID ID -5631350)