GE/PNH-40/2022-23

Amount

B&R PORTION:- Taking down chowkhats with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

Excavation in post holes each not exceeding 0.5 cum getting out, returning, filling in, including spreading, leveling, watering and well ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, in any type of soil, complete all as specified.

M&L for cement concrete of type 1:3:6 type C2 (40 mm graded aggregate) as in post holes complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for walling of random rubble stone/boulder masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed.

M&L for walling of random rubble stone/boulder masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone, complete all as specified and directed.

S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specfied and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling and fixing in opening complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame complete all as specified and directed.

M&L for plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F factory made, 2nd class hard wood, 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers size of members as specified complete all as speified and directed.

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and directed.

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and directed.

S&F Sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and directed.

S & F mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, or galvanised wire staples complete all as specified.

S&F butt hinges medium weight cold rolled mild steel 100 mm complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 75 mm complete all as specified and directed.

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and direted.

S&F 150 mm of aluminium, anodised, barrel tower bolt extruded section and fixed complete all as specified and directed.

S&F 100 mm of aluminium, anodised, barrel tower bolt extruded section and fixed complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles,cast type, fixed complete all as specified and directed.

S&F 100 mm long extruded aluminium alloy handles,cast type, fixed complete all as specified and directed.

S&F in repair anodised aluminium frame of size 100mm x 44mm x 1.8mm thick made up of square/tubular aluminium section for door with one or more rebates joining cleat for fixing etc and provision of aluminium door shutter (single/double) incl necessary joining cleat , glazing clips, rubber gasket, aluminium anodized snap beading, screws, hold fast, aluminium hinges 03 Nos, 100 mm long for each shutter, floor door stopper, locking arrangements, handle, 5.5 mm thick tinted glass fixed in panels and incl double action floor door spring complete all as specified and directed.

S&F in repair suspended false ceiling using 6mm thick E board (classic) of size 600x600mm as in false ceiling fixed with aluminium snap grid with GI frame work of main runner, 38x24x0.4mm thick, cross Tee 28 x 24 mm sheet of thickness 0.3 mm and wall angle 24mm x 24mm x 3mm using 4 mm thick high pressure steam cured classic varient E-board to be placed in the grid suspended by 4 mm GI wire hangers from the purlins of the roof with butterfly clips including preparation of surfaces and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

M&L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n.exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with & incl 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed.

M&L for Vitrified ceramic tiles 10 mm thick area of each tile but not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

All as per Srl item No. 30 above but as in skirting , dado over 10 mm thick plaster in CM 1:4, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces, chajjas, suspended slabs & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for glazed ceramic coloured tiles (450x350mmx7mm/350x250x7mm), as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.

M&L for 75mm thick PCC 1:4:8 type C-2 (using 4mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws complete all as specified.

Dismantling timber scantling 40sqcm and over in section unframed work, as in any position etc , complete all as specified.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for preparation of new steel & Iron surfaces, width or girth exceeding 10cm & apply two coats of synthetic enamel paint of 1st quality over a coat of red oxide zinc chrome complete all as specified and directed.

M&L for preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 75 mm dia PVC floor trap with grating including jointing with solvent cement to waste pipe complete all as specified and directed.

S&F PVC (SWR) soil waste and vent pipes 75mm dia any length single socketed with rubber ring joint, laid in floor or trenches as soil pipe, complete all as specified and directed.

S&F Salt-glazed stoneware gully traps of size 150 x 100mm, square or round mouthed, type 'P' complete all as specified and directed.

S&F in repair soap dish, chromium plated fixed to plugs with brass screwsSalt-glazed stoneware gully traps of size 150 x 100mm, square or round mouthed, type 'P' complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair 75 mm bore PVC(SWR) branch piece, single (single Y) equal or unequal , ordinary or inverted (spigot or socket type) complete all as specified and directed.

S&F PVC (SWR) soil waste and vent pipes 110mm dia any length single socketed with rubber ring joint,fixed to wall, complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110 mm bore PVC(SWR) branch piece, single (single Y) equal or unequal , ordinary or inverted (spigot or socket type) complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore, including cleaning for refixing or removal to store complete all as specified and directed.

S&F for 15mm dia steel tubing, " medium grade', galvanised, with all fitting; laid in trenches complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore, including cleaning for refixing or removal to store complete all as specified and directed.

S&F for 20mm dia steel tubing, " medium grade', galvanised, with all fitting; laid in trenches complete all as specified and directed.

Supply & fixed in repairs Gate Valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified and directed.

S&F in repair bib tap 15 mm bore, fancy type, brass CP with long shank and cup (concealed type), with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair stop valve/angle valve cast copper alloy 15 mm dia, brass CP with long shank and cup (concealed type) with wall flange screwed down, high pressure, with capstan head screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts on both ends of length 600mm complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including flushing cistern and flush pipe, anti syphonage pipe with & including connection to 'P' branch pipe 300 to 400 mm long of size 100 mm dia, incl seat cover, health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr flexible pipe, fixing nut bolts, connection to drain (or outgoing pipe), anti syphonage pipe etc, complete all as specified.

S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. inclusive of fixing supply pipe to flushing cistern, trap and waste pipea and incl 32 mm waste coupling and urinal spreader , complete all as specified.

S&F rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I, of capacity 1000 Ltrs incl with 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, including dismantling of existing tank and removing to store complete all as specified and as directed.

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190gm),complete all as specified.

M&L for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper white or any tint, over and including 1 mm thick wall care putty, complete all as specified and directed.

M&L for preparation of newly plastered / unplastered surfaces of wall including cornices pilaster etc, and applying two coats of cement base paint complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

M&L for cement concrete (1:2:4) using 20mm graded stone aggregate as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, bed block, kneelers, apex stones, bed plates, roof kerbs round or chamfered on edges, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc.including necessary form work complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring, finished even and rough to receive the top layers, complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type-C1 (using 20mm graded crushed stone aggregate) as in copings, hold fasts plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified.

M&L for chequered cement concrete tiles with grey pigment cement and pigments of size 30cmx30cmx25 mm thick,set, jointed and pointed in neat cement surry in floors including 20 mm thick screed bed in CM 1:4 for laying floor tiles complete all as specified and diected.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed in repair complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position (reinforcement cut as required to facilitate demolition), complete all as specified and directed.

M&L for RCC ,1:2:4 type B-0, using 12.5 mm crushed aggregate as in beams, cantilevers, bressumers, lintels over 1.5 m span and the like, complete all as specified and directed.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, rough finished complete all as specified.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for plain fillets, rectangular or triangular in section clean sawn, secured with nails or brads cross sectional area exceeding 13sqcm & not exceeding 25sqcm, second class soft wood (Kail) complete, all as specified and directed.

M&L for 18mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

S & F 30mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

M&L for concrete bed to drain pipes of 150 mm dia incl packing under and haunching against the sides of pipes with concrete, after they are laid in cement concrete 1:4:8 typer D2 (using 40mm graded crushed stone aggregate) and testing including necessary form work, complete all as specified and directed.

M&L for 150 mm internal dia, Salt glazed & stoneware drain pipe grade ‘A’, laid in trenches and jointed with cement joints, complete all as directed by Engineer -in- charge.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:4), complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick wall surface or concrete surface finished even and smooth without using extra cement including mixing of water proofing compound @ 3 % by weight of cement (WPC shall be measured and paid separately) including all necessary scaffolding, complete all as specified and directed.

Supply only liquid water proofing admixture complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping bed plates benching etc slightely rounded or chamfered angles and throating, complete all as specified and directed.

S&F TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed by Engineer-in-Charge.

Construction of 100 users septic tank cover slab of M-25 (Design mix) designed to carry sewage and sludge, excavation in any type of soil, PCC 1:4:8 type D2 (using 40mm graded stone aggregate) below foundation, vent shaft, connections etc. all as shown on Drawing No: CE/TD-1202/2003 sheet 1/2 and 2/2 amended upto date complete all as specified and directed by Engineer-in-charge. Note: Drg is not being uploaded however it can be seen in office during working hours

Construction of soakage well 1.8 mtr dia and 4.50 mtr deep below inlet (depth) from inlet pipe to ground level 45 cm, including excavation and earth work in any type of soil, PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) in foundation, wall in honey combed brick work in CM 1:4, cover slab of M-25 (Design mix), filling with brick bats, earth cushion on brick lining on top and inlet pipe 150mm dia all as shown on drawing No: CE/TD-1202/2003 sheet 1/2 and 2/2 amended upto date complete all as specified and directed by Engineer-in-charge. Note: Drg is not being uploaded however it can be seen in office during working hours

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified.

E&M PORTION:- Suply, installation, testing and commissioning of glass top deep freezer single phase 240 V, 50 Hz of capacity 320 litre complete all as specified and directed.

Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled inddor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracyof ± 2.5 % and of capacity 3.0 KVA complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

Dsmantling and taking down unserviceable main switches, DB etc of any type/size and making good disturbed surfaces to match with the existing finishes, complete all as specifiecd and directed.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light/fan point/bell point controlled by one way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

All as per srl item No 98 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.

S&F in repair ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC poly carbonate, insulated body, complete all as specified and directed.

S&F in repair switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F in repair switch socket combination, 3 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F in repair switch socket combination, 3 pin, 16 Amp flush type universal, complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F in replacement dome type angle holder made out of poly carbonate with metal lamp holder ISI marked with back plate fixed on PVC square block complete all as specified and directed.

S&F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.

Supply and fixing inverter LED batten 20W with square profile and polycarbonate channel lithium ion battery with charging time 8 hours 10 hours and backup time upto 4 hours with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make :- Havellas Cat part No- LHEXACP7FN1W020 or equivalent.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. all as specified and directed.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. complete all as specified and directed.

S&F in repair MCB isolator SPN 40 amps, capacity 10 KA, 'C' series complete all as specified and directed.

S&F in repair MCB isolator, single pole 40 amps, capacity 10 KA, 'C' series complete all as specified and directed.

Supply, laying & testing of cable in trenches/pole XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm, 2 core including taking down old cable, complete all as specified.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation of pole, stays, laying of cables etc and getting out in hard/dense soil complete all as specified and directed by Engineer-in-charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified.

M&L for dry sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

M&L for sub class ‘B’ bricks old size, laid flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as cable protection, laid in trenches, complete all as specified.

S&F GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts etc with fixing clamps, nuts bolts etc complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.

S&F LED 9W inverter lamp (B22 CDL), suitable for angle holder, complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed.

M/S Darshan Kumar

BAKSHI DEVI DASS AND SONS

M/S. Choudhary Dewan Chand And Sons

NATIONAL TRADING COMPANY