REPAIR TO PLASTERING JOINERY ROOF FALSE CEILING FLOOR PLUMBING AND MISC WORKS TO CERTAIN BUILDING AT D ZONE CENTRAL AMENITIES APS AND AMSD UNDER AGE B/R II OF BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site etc complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 with water proofing compund as per manufacurer's instructions, finished surfaces fair and smooth without using extra cement complete all as specified and directed. (Note: - WPC shall be measured and paid separately under relevent items.)

M&L for rendering 5mm thick on concrete surfaces of ceiling/Chajja/Facia of chajja etc in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc, complete all as specified and directed.

M&L for providing 25mm thick PCC (1:2:4) type B1 (using 12.5mm graded stone aggregate) as in sub base, complete all as specified and directed.

M&L for Vitrified Ceramic Tiles (Light Shade) 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15mm thick screed in cement mortar (1:6) set complete all as specified and directed

Ditto all as per item No 8.00 above but for vertical surfaces such as skirting etc, over and including 10mm thick back coat in CM 1:4 complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. over 15mm thick screed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Ditto all as per item No 10.00 above but for vertical surfaces such as skirting etc, over and including 10mm thick back coat in CM 1:4 complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for Glazed ceramic tiles of size 300mmx 450mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick cement mortal backing coat in CM 1:4 complete all as specified and and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for granite (of any type) stone slab 16 to 18mm thick (table rubbed and polished), in skirting, Kitchen platform /dado etc laid over cement screed bed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for Marble tiles 20mm thick (Makrana white) in narrow widths machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing mirror finish (granite polish) complete all as specified and directed.

Dimantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges, valley gutter etc, complete all as specified and directed.

S&F 6 mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts etc complete all as specified and directed.

Fixing only 6 mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts etc complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals) complete all as specified and directed.

S&F Pre-painted coloured trapezoidal plain galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position like trusses, rafters, purlins etc. complete all as specified and directed.

S&F mild steel rolled sections Fe 410-W (Gde E-250) quality - B as in main and cross beams, hip and jack rafters; truss, purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate, framing for cladding, nuts, bolts, washers etc,includng welding or riveting etc, complete all as specified and directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde -E-165 etc complete all as specified and directed

S&F Hard drawn steel wire fabric in available size weight not exc 4.00 Kg /sqm for the tank caging etc including welding, riveting, framing etc, complete all as specified and directed.

S&F Framed work Fe-290 (Gde E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets, and existing frame work also complete all as specified and directed.

M&L for Non asbestos designer fibre cement building boards of size 600mmX600mmX4 mm thick, used as a panel insert in a frame work made using GI T-section of size 25mmX25mm in square pattern of grid size 600mmX600mm. The GI frame work is supported from the ceiling with the help of J Hook and 4 mm GI wire of required size to maintain the proper levels etc. The GI frame work is supported on side wall with the use of GI L section of size 25mmX25mm angle complete all as specified and as directed.

S&F Decorated PVC False ceiling of size 600mmX600mmX5 mm thick, used as a panel insert in a frame work made using GI T-section of size 25mmX25mm in square pattern of grid size 600mmX600mm. The GI frame work is supported from the ceiling with the help of J Hook and 4 mm GI wire of required size to maintain the proper levels etc. The GI frame work is supported on side wall with the use of GI L section of size 25mmX25mm angle complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregates) as in sub base of flooring, complete all as specified and as directed.

M&L for providing 50mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of 3:1, complete all as specified and directed.

M&L for 60mm thick Factory Fabricated Machine pressed precast concrete reinforced with glass fibre interlocking paver blocks confirming to IS 15658-2006, M-35 Grade, glossy finished, vibro compacted (size, shape and colour as approved by the GE) with grey cement and pigments, complete all as specified and directed.

M&L for factory fabricated Hydraulically machine pressed cement concrete chequered tiles of size 300x300X25mm thick (with grey cement and pigment), set in neat cement slurry including provision of 15mm thick cement screed bedding layer in CM 1:4, tiles joints shall be grouted and immediately after grouting, the joints shall be pointed flush in CM 1:3 mixed with pigments to match the colour of the Tiles (in separate process), complete all as specified and directed.

M&L for sand filling under floors including spreading, levelling and well ramming watering and consolidation complete all as specified and directed.

Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc, also including disposing off the retrieved debris outsite the premises, complete all as specified and directed.

Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc, also including disposing off the debris outsite the premises, complete all as specified and directed.

Taking down Wooden/PVC/Flush shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each, complete all as specified and directed.

S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and directed.

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and directed.

M&L 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkat etc., complete all as specified and directed.

S&F 18/19mm thick plywood grade 'A' (Termite treated / water proof), type BB fixed with screws to timber /iron frame work complete all as specified. (Make:Green Ply/Kit ply)

M&L for 0.9 mm thick decorative choice of lamination type -1 of surface finish, colour and pattern as approved adhesive as per manufacturers instructions complete all as specified.

M&L for preparation of new plastered or un- plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

S&F continous (piano) hinges width of flaps (when open) 30mm ,mild steel bright finish or electrogalvanised complete all as specified.

S&F stain less steel catcher of superior quality all as specified and directed.

S&F 50mm stain less steel pivoted type hinges of superior quality and directed.

S&F 75mm long aluminium alloy handles, fabricated type, anodised (ISI Marked) all as directed.

S&F aluminium 65mm mortice lock four levers (ISI Marked) all as specified.

S&F aluminium anodised barrel tower bolts (ISI Marked ) of extruded section with75mm long bolt complete all as specified.

S&F in repairs Drawer side channel of std size and incl of rooler for moving drawer, mild steel bright finish,or electrogalavanised width of flap 30mm & Length 60 mm all as specified.

S&F in repairs handles of 125mm size stainless steel fancy type, bright finish fixed with screw all as specified.

S&F Factory made 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F Factory made 25mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides icluding provision of 4mm thick 2nd class hard wood edging to the exposed edges of the shutter complete all as specified and directed.

M&L for 18-19mm thick, prelaminated partical board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shelves fixed with and including 2nd class hard wood supports of size as directed with nails or screw as required at site, complete all as specified and directed.

M&L for 2nd class hard wood (Hollock/Kalasiris/Brjsal/Gamari) (kiln seasoned and chemically pressure treated) 35 mm thick glazed and skeleton shutters, open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a), complete all as specified and directed.

S&F 35mm thick factory made second class hard wood plain framed panelled shutter (two panels) with lock rail and pannel or 9mm BWP comerical ply or 12mm venered particle board with comerical face venering on both faces. The size of rail and style as per IS-1003 part kilin seasoned complete all as specified and directed.

S&F Factory made PVC Door frame of size 50 x 47 mm with a wall thickness of 5 mm (+0.25mm) Density 600 Kg/Cbm, made out of single piece extruded PVC Foam profile, with mitred cut joints and joint with 2 Nos of brackets of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, or fusion heat welding process, the vertical door profiles shall be reinforced with 33 x 17mm M.S rectangle tube of 19 Guage, the door frame shall be fixed to the wall using 8 x 100 mm long anchor fasteners, complete all as per manufacturer’s specifications and directed.

S&F factory made solid panelled PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and joined together with solvent cement etc complete all as shown on drg at Srl page No 156 of MES Schedule Part-II, complete all as specified and directed.

S&F standard aluminium powder coated section(minimum thickness of powder coating shall be 50 micron and colour shall be as approved by the GE) as in frame, shutters for doors, windows / ventilators, Fixed/Openable / side hung/ sliding two or three track or in any pattern, partitions, kitchen cabinate, kitchen almirah, etc cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc, complete all as specified and directed. Notes:- (i) Weight of Aluminium sections as per per ISI or as per manufacturer, whichever is less, shall only be considered for payment. (ii) The accessories Aluminium mongries etc required to be provided for windows, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered. (iii) Cost of all the items / accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall be measured and paid separately under respective itemsof SCH 'A' / BoQ.

S&F in repairs, Factory made, steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F in repair factory made steel windows with side hung shutters including projecting type hinges with steel handle, and peg stay, complete with glazing bars, dovetaild or welded, complete all as specified and directed.

Ditto all as per item No 63.00 here-in-before but steel window without glazing bars complete all as specified and as directed.

Making good steel windows Z section by taking down and refixing including cutting/welding if required and made good to smooth functioning including replace of minor fittings (hinges, handle, stay etc.) of the window complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed.

S&F 4mm thick sheet glass of ordinary quality and glazing for Aluminium Joinery or with & including oil putty for steel surrounds or with wooden beading for wooden joinery (cost of wooden beads included in wooden joinery), in squares n exc 0.50 sqm in each pane, complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing for Aluminium Joinery or with & including oil putty for steel surrounds or with wooden beading for wooden joinery (cost of wooden beads included in wooden joinery), in squares n exc 0.50 sqm in each pane, complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as specified and directed.

Ditto all as per Item No 69.00 above but fixed in repair etc complete all as specified and directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed.

S&F Aluminium anodised tower bolt 150 mm long of extruded section etc complete all as specified and as directed.

S&F aluminium alloy, anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed.

S&F 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed.

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed.

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. fixed in floor complete all as specified and directed.

S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and directed.

125mm size Hasp and staple, aluminium, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

Supply only water proofing compound (Liquid) complete all as specified and as directed.

Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing WPT felt beyond the MOD premises etc complete all as specified and as directed

M&L for brushing neat cement slurry with 3.00 kg of cement per Sqm over roof surfaces and sunken floor etc, providing 20mm thick plastering in cement mortar 1:4 mixed with liquid water proofing compound, finished even and smooth complete all as specified and directed. (Note: Supply only water proofing compound shall be measured and paid seperately.)

M&L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications, complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying 3mm thick APP modified water proofing polymeric membrane reinforced with non woven polyester fibre using butane torch by torch application with 10cm side lap and 15cm end lap.

M&L for applying one coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane, complete all as specified and directed.

M&L for cement concrete 1:5:10 type E-2 using 40mm graded brick aggregates as in sunken portion of WC etc, complete all as specified and directed.

M&L for applying and evently bituminous tack coat @ 1.20 Kg/Sqm of industerial bitumen blinded with 0.006 cum of course sand per sqm on the surfaces of sunken floor complete all as specified and directed.

S&F in repair for 75 mm bore out let cast floor trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and directed

S&F repair centre whole bassin mixture without popup waste system with 450mm long bradied hoses of 15mm bore etc complete all as specified and directed (CAT NO FLR- 5167NBof Make Jaquar)

S&F reapir soap dish holder etc complete all as specified and directed. (CAT NO 525 CAN-1131N of Make Jaquar)

S&F in repair toilet roll paper holder etc complete all as specified and directed (CAT NO.ACN-1143N of MAKE-JAQUAR)

S&F in repair glass shelf 600 mm long etc complete all as specified and directed (CAT NO CAN-171N of MAKE-JAQUAR)

S&F in repair corner glass shelf (with bracket) etc complete all as specified (with bracket) etc complete all as secified and directed (CAT NO. CAN-1173 of Make-JAQUAR)

S&F in repair hand shower (Health Faucet) ABS Body with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as specifed and as directed (CAT NO. ALDCHR-593N of MAKE-JAQUAR)

Demolition of brick work or rubbled stone masonry including all quoins arches, pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

M&L for brick work with fly ash brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed.

M&L for brick work with fly ash Bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and directed.

Taking down 15mm bore steel tubing & connections, complete all as specified and directed.

Ditto all as per item 97.00 here-in-before but 20 mm bore complete all as specified and directed.

Ditto all as per item 97.00 here-in-before but 25 mm bore complete all as specified and directed.

Fixing only of 15mm bore GI tubing, medium grade with provision of new G.I. fittings as required and fixing accessories in new or old position (walls,ceiling, floor etc) including testing, complete all as specified and directed.

Ditto all as per item 100.00 here-in-before but 20mm bore complete all as specified and directed.

Ditto all as per item 100.00 here-in-before but 25mm bore complete all as specified and directed.

S&F 15mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed partly on the surfaces and partly concealed in the walls & ceiling or laid in floors, also including cutting chases of the required size and making good the same after fixing of the pipes in CM 1:3 to match with the adjoining surfaces, complete all as specified and as directed.

Ditto all as per item 103.00 here-in-before but 20 mm bore pipes complete all as specified and directed.

Ditto all as per item 103.00 here-in-before but 25 mm bore pipes complete all as specified and directed.

Dismantling water tanks of any capacity including disconnecting the connections, complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 500ltrs capacity, ISI marked, (cylindrical vertical type double-layered) with closed top including inlet, outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoisted in position, including Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 1000ltrs capacity, ISI marked, (cylindrical vertical type double-layered) with closed top including inlet,outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoisted in position, including Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. complete all as specified and directed.

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and directed.

S&F in repair sink made of 0.80 mm thick sheet of stainless steel (Bronze range super steel 204) for kitchen or laboratory with and including plugs, washers, wastes; 40mm bore PVC waste pipe, also including bedding in cement mortar 1:3 on dwarf wall or including providing mild steel cantilever brackets and connecting union to pipe, overall size 460mm x 535mm x 203mm with bowl size 460mmx 394mm x 203mm of Cat No 920-D of Make- Prayag or equivalent of make as mentioned in Appx “B” of particular Specifications as approved by GE, complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (Padestal Pattern), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), and making good to dismantled/damaged tiling floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) complete all as specified and directed.

S&F in repair Vitreous china squatting pan 'Orrisa' patterns of size 580mm x 440mm white, (excluding flushing cisterns and flush pipe), including brass chromium plated trap 'P' or 'S' pattern with inlet and outlet integral foot rests, complete all as specified

S&F of Vitreous China Urinals bowl half stall, type (back or corner wall type) complete incl providing and fixinf plugs, bedding urinal against wall in C M 1:2, securing urinal to nplugs with and incl 60 mm long brass screws, pointing around back in cement ; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair counter top wash hand basin white flat of size 545X545X180mm excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and directed (CAT NO. FSS-WHT-29601, MAKE - JAQUAR)

S&F in repair vitreous china wash basin, 1st quality, white, flat back, size 550x400 mm excluding taps but including 32 mm bore brass chromium plated waste fittings, 32mm bore PVC waste pipe, MS brackets, complete all as specified and directed.

S&F in repairs PVC valveless, double syphonic action type, flushing cistern, low level of 10 Litres capacity, white, with and including inlet, ball valve, float, 32mm dia flush pipe of polyethylane of low or high density or PVC, flushing bend & handles, also including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet & making connections, complete all as specified and directed.

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and directed.

S&F stainless steel kitchen plate rack of overall approx size 24’’ x 24’’ x 10’’, Cat No –P-310 of Make Prayag or of any other equivalent make as approved by GE complete all as specified and directed.

Taking down PVC rain water pipes (any size or pattern) including all fittings head shoes etc complete all as specified and directed.

S&F 110 mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified.

S&F in repair 110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and directed

S&F in repair for 75 mm bore out let cast floor trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and directed.

S&F in repairs PVC rain water vally gutter of size 150 mm dia half round type, fixed with steel stay etc complete all as specified and directed.

S&F in repairs stainless steel decorative curtain rod of 20 mm bore with wood finishes, complete all as specified and directed.

S&F brackets and funnel caps suitable for the curtain rod to be provided under item above, complete all as specified and directed.

S&F 50 mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints fixed to walls complete all specified.

S&F in repairs bib tap, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and directed.

Ditto all as per item No.128.00 here-in before but tap 2 in 1 of 15mm bore complete all as specified and directed. (Make : Marc or equivalent)

S&F in repairs stop valves, fancy type, cast copper alloy, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified and directed.

S&F in repairs Pillar taps, fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and directed.

S&F in repair hand shower (Health Faucet) ABS Body with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as specifed and directed (CAT NO. ALDCHR-593N) MAKE-JAQUAR

S&F in repairs tubular towel rail, 20mm dia, D type, brass chrormium plated, 600mm long between flanges, complete all as specified and directed.

S&F in repairs brass chromium plated shower roses, 125 mm size with or without swivel joints including fixing to 15mm bore steel pipe or union, complete all as specified and directed.

S&F in repair grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap, complete all as specified and directed.

M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.

M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying one coat of white washing (Lime wash white) on ceiling surfaces including preparation of old decorated plastered /unplastered surface of ceiling by brooming down, scrapping cleaning & removing down smoke soot, moulds, moss and efflorescence etc complete all as specified and directed.

M&L for applying one coat of oil emulsion distemoer (oil bound distemper) of any tint including preparation of surfaces of walls on old decorated plastered/unplastered surfaces by washing/rubbing down and scrapping old loose material, smoke, soot, moulds, moss and efflorence etc including filling and stopping the rough surface/nail holes with white cement/POP/wall putty complete all as specified and directed.

Ditto all as per item No. 143.00 here-in -before but two coats of distemper oil emulsion complete all as specified and directed.

M&L for preparing old plastered surface of wall and applying One coat of cement base paint by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete removal of existing treatment all as specified and directed.

M&L for applying one coat of exterior emulsion weather coat paint including preparation of old decorated surface of wall by washing/rubbing down and stopping of /filling nail holes /rough surfaces with putty/plaster of paris complete all as specified and directed.

M&L for applying two coat of exterior emulsion weather coat paint including preparation of old or new decorated surface of wall by washing/rubbing down and stopping of /filling nail holes /rough surfaces with putty/plaster of paris complete all as specified and directed.

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed.

M&L preparing new surfaces of walls for applying two coats of oil emulsion distemper (oil bound distemper) of any tint complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 1,08,282.00 (refer Tender Srl Page No 43). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S CONTRACTS

M/S KAR CONSTRUCTION

M/S BENGAL ENGINEERING ENTERPRISES

M/S Banerjee construction co

NAYAK BROTHERS

Prahalad Rai

M/S G D CONSTRUCTION