COMPREHENSIVE MAINT OF INTERNAL ELECTRIFICATION, CEILING FAN, EXHAUST FAN, RE-WIRING AND ALLIED WORKS AT GARRISON SATWARI, BWR, RIDGE AREA, ROULKI, DEFENCE COLONY ETC UNDER GE SATWARI

Amount

"Receiving/recording complaints lodged by the occupants of all Md accn incl MAP Qtrs at 'Y' Stn and Defence colony of GE Satwari of electrification nature, rectification of the fault as per the complaint lodged by the user or as given by MES onward KWH meter in respect of main distribution board having switch fuses, MCB distribution board in sheet metal enclosure, point wiring, fixture for light/ Fan/bell/light or power sockets complete repairs to the extent by removing connections from the system, removing faults in wires, batten, conduit, sunk boxes, junction boxes, main switches, MCBs/DBs utility light fittings, FTL light fitting any wattage lamp, holders, AC ceiling/exhaust fans and other connected fixtures of the internal electrification including providing of petty stores such as insulation tape, screws, nuts as required to rectify the fault with regard to the complaint lodged and refixing of fittings, fixture to their position as dismantled complete all as directed at site to the entire satisfaction of Engineer-in-Charge/users. NOTE: (i) The new items provided shall be measured and paid for separately under relevant items of Sch ‘A’. (ii) If contractor fails to attend the complaints in reasonable time a penal recovery as mentioned in Sch'A' Notes shall recovered per complaint. (iii) Contractor shall employee minimum of two electrician and two helper having adequate experience with ITI certification course in the said field.

"Receiving/recording complaints lodged by the occupants of all Md accn of BWR area and Ridge area under GE Satwari of electrification nature, rectification of the fault as per the complaint lodged by the user or as given by MES onward KWH meter in respect of main distribution board having switch fuses, MCB distribution board in sheet metal enclosure, point wiring, fixture for light/ Fan/bell/light or power sockets complete repairs to the extent by removing connections from the system, removing faults in wires, batten, conduit, sunk boxes, junction boxes, main switches, MCBs/DBs utility light fittings, FTL light fitting any wattage lamp, holders, AC ceiling/exhaust fans and other connected fixtures of the internal electrification including providing of petty stores such as insulation tape, screws, nuts as required to rectify the fault with regard to the complaint lodged and refixing of fittings, fixture to their position as dismantled complete all as directed at site to the entire satisfaction of Engineer-in-Charge/users. NOTE: (i) The new items provided shall be measured and paid for separately under relevant items of Sch ‘A’. (ii) If contractor fails to attend the complaints in reasonable time a penal recovery as mentioned in Sch'A' Notes shall recovered per complaint. (iii) Contractor shall employee minimum of two electrician and two helper having adequate experience with ITI certification course in the said field.

Supply only in replacement of Switch piano made of polycarbonate flush button single pole one way, 6 Amps, 240 V complete all as specified and directed. Make : Anchor PC Penta or equivalent in List of makes.

Supply only in replacement of Switch piano modular made of polycarbonate flush button single pole Single module, 6 Amps, 240 V complete all as specified and directed Make : Elvira Indoasian or equivalent in List of makes.

Supply only in replacement of Switch piano made of polycarbonate flush button single pole one way, 16 Amps, 230/240 V complete all as specified and directed. Make : Anchor PC Penta or equivalent in List of makes.

Supply only in replacement of Switch piano Modular made of polycarbonate flush button single pole single module, 16 Amps, 230/240 V complete all as specified and directed. Make : Elvira Indoasian or equivalent in List of makes.

Supply only in replacement of Switch piano made of Polycarbonate flush button single pole two way 6 Amps, 240 V complete all as specified and directed. Make : Anchor PC Penta or equivalent in List of makes.

Supply only in replacement of Switch piano Modular made of Polycarbonate flush button single pole two way 6 Amps, 240 V complete all as specified and directed.Make : Elvira Indoasian or equivalent in Havells, Legrand.

Supply only in replacement of Bell push made of polycarbonate piano flush type 6 amps , 240 V complete all as specified and directed. Make : Anchor PC Penta or equivalent in List of makes.

Supply only in replacement of Bell push modular made of polycarbonate piano flush type 6 amps , 240 V complete all as specified and directed. Make : Elvira Indoasian or equivalent in List of makes.

Supply only in replacement of Ding Dong door bell, AC 230/240 volt single phase complete all as specified and directed.

Supply only in replacement of Buzzer AC 230 volts Single Phase complete all as specified and directed.

Supply only in replacement of Socket outlet 2-in-1 5 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed.Make : Anchor PC Penta or equivalent in List of makes.

Supply only in replacement of Socket Modular outlet 2-in-1 5 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed.Make : Elvira Indoasian or equivalent in List of makes.

Supply only in replacement of Switch socket combination 2-in-1 5 pin 6 Amps made of polycarbonate flush type complete all as specified and as directed.Make : Anchor PC Penta or equivalent in List of makes.

Supply only in replacement of Socket outlet 2-in-1 5 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as directed. Make : Anchor PC Penta or Havells, REO.

Supply only in replacement of Socket outlet Modular 2-in-1 5 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as directed. Make : Elvira Indoasian or equivalent in List of makes.

Supply only in replacement of switch socket combination 5 in 1, 6 and 16 Amps flush type made of polycarbonate universal controlled by one switch complete all as specified and as directed. Make : Anchor PC Penta or equivalent in List of makes.

Supply only in replacement of Fan regulator 2 Module stepped type (electronic ) made of polycarbonate for 1200/1400mm sweep AC ceiling fan complete all as specified and as directed. Make : Anchor PC Penta or equivalent in List of makes.

Supply only in replacement of modular type Fan regulator 2 Module stepped type (electronic ) made of polycarbonate for 1200/1400mm sweep AC ceiling fan complete all as specified and as directed. Make : Elvira Indoasian or equivalent in List of makes.

Supply only in replacement of LED tubelight fitting for 18-20 Watt LED, 230V, Batten type complete in all respect . along with LED Tube Rod Polycarbonate with superior aesthetic and heat dissipation capability suitable for G-13 base tube lights base fluorescent T8-T12 luminaire, 18-20 watt LED wattage with colour temp of 6000K 1800 lumens and with surge arrestor complete in all respect . Note : The LED batten and LED tube rod shall be of same make.

Supply only in replacement of LED wall mounted tube fitting 10W LED complete fitting.

Supply only in replacement of energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed.

Supply only in replacement ofLamp holder,Polycarbonate type with back plate for batten fitting complete all as specified and directed.

Supply only in replacement of Capacitor 2.5 mfd 220 volts AC 50 Hz all as specified and as directed by the Engr-in-charge

Supply only in replacement of Capacitor 3.15 mfd 220 volts AC 50 Hz complete all as specified and directed.

Supply only in replacement of MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, Complete all as specified and directed. Make: Indo Asian Optipro or equivalent in List of makes.

Description all as per srl item No 27 here in before but of rating 40 Amp .

Description all as per srl item No 27 here in before but of rating 63 Amp .

Supply only MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed. Make: Indo Asian Optipro or equivalent in List of makes.

Supply only in replacement of Laminated sheet cover hylam ISI marked 3mm thick including cutting of sheet for fixing switches/sockets as required at site incl suitable size screws - 04 Nos for fixing on existing MS sunken boxes of size 9'' x 5'' complete all as specified and directed .

Description all as per srl item No 31 but of size 5'' x 5''.

Description all as per srl item No 31 but of size 12'' x 10''.

Laminated sheet cover hylam brand ISI marked 3mm thick round sheet for fixing on junction boxes as required at site incl suitable size screws - 01 Nos complete all as specified and directed.

Supply only in replacement of wire of size 1.5 Sqmm with PVC insulated FRLSH Single Core multistranded copper conductor for working Voltage 1100 Volts.

Description all as per srl item No 35 here in before but of size 2.5 Sqmm.

Description all as per srl item No 35 here in before but of size 4.0 Sqmm.

Description all as per srl item No 35 here in before but of size 6.0 Sqmm .

PVC gang box suitable for 6 Amp Socket and 6 amp switch.

PVC gang box suitable for 16 Amp Socket and 16 amp switch.

PVC enclosure suitable for MCB complete all as specified and directed.

PVC casing n caping ISI marked of size 20mm

PVC casing n caping ISI marked of size 25mm

Supply only in replacement of LED Tube Rod Polycarbonate with superior aesthetic and heat dissipation capability suitable for G-13 base tube lights base fluorescent T8-T12 luminaire, 18-20 watt LED wattage with colour temp of 6000K 1800 lumens and with surge arrestor complete in all respect suitable for installation in existing T8 tubelight with G13 lamp holders to give glare free light 18/20 watt.

Supply only in replacement oft LED Tubelight fitting with aluminium heat sink and polycarbonate diffuser with high efficacy suitable for installation in existing T5 tube light with G5 lamp holders to give glare free light 18 watt along with LED driver.

Supply only in replacement of single pole enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts complete all as specified and directed.

Supply only in replacement of die cast aluminium housing frosted PC diffuser,IP65 gate light.Make Jaquar suitable for retrofit LED bulb 10 watt complete all as specified and directed.

Supply only in replacement of LED Post Top lantern with die cast aluminium spigot,spun aluminium powder coated top cover, aluminium PDC heat sink,opal PC diffuser and clear acrylic.IP65. post top lantern 30 WATT,Make-Halonix complete all as specified and directed.

Supply only in replacement of Vertical Distribution Board (TP&N) 4 way double door suitable for and including MCCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. Note:- (i) Rate includes MCCB four pole 100 Amp, 16 KA, 415 volts with adjustable thermal settings. (ii) MCBs shall be measured and paid separately. (iii) TPN DB and MCCB should be of same make.

Supply only in replacement of Distribution Board (SPN) double door 12 Way and should be IP 43 protected with Copper Bus bar,Earth Bar ,neutral Bar Door Earthing .Makes: IndoAsian Optipro or equivalent in Havells/ Legrand

Supply only for replacement Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar,Earth Bar ,neutral Bar Door Earthing .Make: IndoAsian Optipro or equivalent in List of makes.

Supply only in replacement of Distribution Board (SPN) double door 4 Way and should be IP 43 protected with Copper Bus bar,Earth Bar ,neutral Bar Door Earthing .Make: IndoAsian Optipro or equivalent in List of makes.

Repair Of Fans: M& L for replacement of Rewinding of AC ceiling fan single phase 230 volts, 50 c/s 1200mm sweep, any make and type with appropriate gauge super enameled copper winding wire with allied insulation winding material, varnishing with air drying insulation varnish including fixing of any item found damaged/unserviceable i.e capacitor of appropriate cap, PVC connector, MS galvanised check nut, rubber pads , PVC strip steel clamps and testing complete after rewinding and assembling Note: Capacitor, PVC connector, MS galvanised check nut, rubber pads,steel strip clamp if any replaced, shall be measured separately under respective items.

Description all as per srl item No 53 above but fan of 1400mm sweep.

Description all as per srl item No 53 above but for AC exhaust fan of size 300mm sweep.

Description all as per srl item No 53 hereinbefore but forAC exhaust fan of size380mm sweep .

Description all as per srl item No 53 hereinbefore but for AC exhaust fan of size 450mm sweep .

Description all as per srl item No 53 hereinbefore but for bracket/cabin fan of size upto 400mm sweep AC 230/240 volts.

Description all as per srl item No 53 hereinbefore but for bracker/cabin fan/Pedestral Fan of size of size 450mm sweep.

S & F in replacement ball bearing suitable for AC ceiling fan 1200/1400mm sweep to replace the unserviceable ball bearing of fan motor complete all as specified and directed.

Description all as per srl item No 60 above but for AC exhaust fan /Bkt Fan /Pedestral Fan of size 300 to 380mm sweep.

Description all as per srl item No 60 above but for AC exhaust fan /Bkt Fan /Pedestral Fan of size 400 to 450mm sweep.

Supply onlyin replacement of gun metal bushes suitable for AC ceiling fans 1200/1400mm sweep, any make to replace the unserviceable bushes of fan and oiling complete etc all as specified and as directed.

Supply only in replacement of capacitor 2.5 mfd + 5%, 230/240 volts AC, 50 Hz

Supply only in replacement of capacitor 3.15 mfd + 5%, 230/240 volts AC, 50 Hz

Supply only in replacement of rubber pads for packing capacitors of AC ceiling fan in down rod bracket suitable for fan of any size and make, as approved by Engr-in-Charge.

Supply only in replacement of steel strip clamps with fixingscrews for holdings capacitors of ceiling fan and fixing to MS socket of fan motor, as approved by Engr-in-Charge.

M & L for electric cable PVC insulated with copper conductor (flexible cable) of size 23/0.0076 twin core for connecting fan to electric system, complete all as specified & directed.

Supply and fixing in replacement of fan blades for AC ceiling fans 1200mm as per sample including fixing screw and washer complete suitable for fans of old model all as directed and specified by the Engr -in-charge

Supply and fixing in replacement of fan blades for AC ceiling fans 1400mm as per sample including fixing screw and washer complete suitable for fans of old model all as directed and specified by the Engr -in-charge

M & L for Spray painting to AC ceiling fan 1200/1400mm sweep any make complete to motor assy, down rods, blades with ISI marked white synthetic enamel paint as approved by Engr-in-Charge after preparation of surface including filling cavities with filler, complete all as directed by Engr-in-Charge.

Description all as per srl item No 71 hereinbefore but for exhaust fan exceeding 300mm and upto 450mm.

M & L for Canopies for AC ceiling fan of size 1200/1400 mm sweep for any make of fan.

M & L for hanging clamp suitable for ceiling fan of size 1200/1400mm of any make complete with nuts, bolts, rubber reel and locking pin complete all as directed by Engr-in-Charge.

Supply and fixing in replacement of down rod (hanging rod) made of GI tubing 20mm bore for length upto 120cm suitable for AC ceiling fan of size 1200mm /1400mm sweep including provision of hole for fixing of nut and bolt all as specified

Supply and fixing in replacement of down rod (hanging rod) made of GI tubing 20mm bore for length upto 90cm suitable for AC ceiling fan of size 1200mm /1400mm sweep including provision of hole for fixing of nut and bolt all as specified

Repair to Internal wiring: Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs and matching the white wash colour with existing colour, complete all as specified and as directed.

M&L for complete point wiring One light/fan point controlled by one, one way switch 6 Amp complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , and matching the white wash colour with existing colour, terminated into suitable module Modular Metal flush Boxes of Make : Elvira Indoasian or equivalent in List of makes. including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

Description all as per srl item No 78 hereinbefore but for One 3 pin socket outlet 6 amp independent

Description all as per srl item No 78 hereinbefore but for One 3 pin socket outlet 6 amp same board

Description all as per srl item No 78 hereinbefore but for One bell/ buzzer point controlled by one, complete all as specified and directed.

Description all as per srl item No 78 hereinbefore but for one 2 way light point controlled by two 2 way switch

Description all as per srl item No 78 hereinbefore but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Description all as per srl item No 78 hereinbefore but for one AC Plug in socket independent with cable of size 4 Sqmm for point wiring and 4 sqmm as in continuous earth wire.

M&L for complete point wiring One light/fan point controlled by one, one way switch 6 Amps complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in existing conduit, matching the white wash colour with existing colour terminated into suitable module Modular Metal flush Boxes of Make : Elvira Indoasian or equivalent in List of makes including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :- Note: suitable Module flush boxes/white cover sheets with frame as specified to be provided in replacement to MS/Galvanised sunken boxes and measured & paid separately as per relevant item.

Description all as per srl item No 85 hereinbefore but for One 3 pin socket outlet 6 amps independent

Description all as per srl item No 85 hereinbefore but for One 3 pin socket outlet 6 amps on same board

Description all as per srl item No 85 hereinbefore but for One bell/ buzzer point controlled by one, complete all as specified and directed.

Description all as per srl item No 85 hereinbefore but for one 2 way light point controlled by two 2 way switch

Description all as per srl item No 85 hereinbefore but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for piont wiring and 2.5 sqmm as in continuous earth wire.

S & F in replacement of switch Modular 1 way 1 module ISI marked 6 Amps, 240 V.

S & F in replacement of modular switch Polycarbonate material ISI marked two way 1 module, 6 Amps, 240 V.

S & F in replacement of Modular Bell Push with indicator Polycarbonate material ISI marked 1 Module , 6 Amps, 240 V Make: Elvira Indoasian or equivalent in List of makes.

S & F in replacement of Ding Dong door bell, AC 230 volt single phase.

S&F in replacement of Modular socket outlet 6 Amps 5 pin 2 module complete all as specified and as directed.

S&F in replacement of Modular socket outlet 6 / 16 Amps 5 pin 2 Module complete all as specified and as directed having pencil free operation & child safety shutter .

S & F in replacement of modular switch Polycarbonate material ISI marked one module , 16 Amps, 240 V.

Supply and fix in replacement of Modular Fan regulator step type (electronic ) 2 Module for 1200/1400mm sweep AC ceiling fan.

Supply and fixing in replacement of ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

S&F in replacement of LED wall mounted tube fitting 10W LED complete fitting.

Supply and fixing in replacement of down lighter fitting with LED light fitting 18 W LED 6000K, 230 V suitable for Recess mounted downlighter with pressure die-cast Al. heat sink & high brightness LED, with diffuser to give glare free light suitable for existing ceiling cutout Ø 160 mm complete all as specified and as directed.

S&F in replacement of LED ceiling light fitting 36 W recess mounting 2'X2' white powder coated CRCA housing with LED's seamless front frame with flat white high transmission acrylic cover complete all as specified and directed.

S&F in replacement of decorative wall light fitting made up of high grade engineering plastic material suitable for retrofit CFL 20W/ LED bulb 7 Watt complete all as specified and directed.

S & F in replacement of Decorative ,wall mounting fixture ,in durable plastic body and designer mesh in gold finish suitable for 14 Watt retrofit CFL 14Watt complete all as specified and directed along with CFL lamp 14 Watt.

S & F in replacement of Decorative ,wall mounting fixture ,SS finish fixture with opal diffuser suitable for 5 Watt LED complete all as specified and directed along with LED lamp 5 Watt.

S&F in replacement of energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed.

S & F in replacement of lamp holder,PVC /Polycarbonate type with back plate for batten fitting

S&F in replacement of LED lamp suitable for B22 holder of capacity 7 Watt.

S&F in replacement of Vertical Distribution Board (TP&N) 4 way double door suitable for and including MCCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. including taking down old UNSV DB/MCB any type. Makes: Legrand/IndoAsian Optipro/Schnider Note:- (i) Rate includes MCCB four pole 100 Amp, 16 KA, 415 volts with adjustable thermal settings. (ii) MCBs shall be measured and paid separately. (iii) TPN DB and MCCB should be of same make.

S&F in replacement of Distribution Board (SPN) double door 12 Way and should be IP 43 protected with Copper Bus bar,Earth Bar ,neutral Bar Door Earthing including taking down old UNSV DB/MCB any type.

S&F in replacement of Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar,Earth Bar ,neutral Bar Door Earthing .Makes: IndoAsian Optipro or equivalent in List of makes including taking down old UNSV DB/MCB any type.

Supply & Fixing in replacement of MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, Complete all as specified and directed. Make: Indo Asian Optipro or equivalent in List of makes.

MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series,ISI Marked complete all as specified and directed.Make:- IndoAsian Optipro or equivalent in List of makes.

S&F in replacement of sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

All as per Item No 114 but of size 2 x 6 Sqmm with earth wire of size 6.0 Sqmm drawn through existing PVC/steel Surface/Concealed conduit .

S&F in replacement of sub main wiring with single core cable 2x 10 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x10 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Description all as per srl item No 116 hereinbefore but of size 2 x 10 Sqmm with earth wire of size 10.0 Sqmm drawn through existing PVC/steel Surface/Concealed conduit .

M&L in replacement of for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

Supply and fixing in replacement of Modular GI Metal Flush Box 12 module complete all as specified and directed.

Supply and fixing in replacement of Modular GI Metal Flush Box 8 module complete all as specified and directed.

Supply and fixing in replacement of Modular GI Metal Flush Box 6 module complete all as specified and directed.

Supply and fixing in replacement of Modular GI Metal Flush Box 4 module complete all as specified and directed.

Supply and fixing in replacement of Modular GI Metal Flush Box 3 module complete all as specified and directed.

Supply and fixing in replacement of Modular GI Metal Flush Box 2 module complete all as specified and directed.

Supply and fixing in replacement of White Cover Plate with Frame 12 module Complete all as specified and directed.

Supply and fixing in replacement of White Cover Plate with Frame 8 module Complete all as specified and directed

Supply and fixing in replacement of White Cover Plate with Frame 6 module Complete all as specified and directed

Supply and fixing in replacement of White Cover Plate with Frame 04 module Complete all as specified and directed.

Supply and fixing in replacement of White Cover Plate with Frame 03 module Complete all as specified and directed.

Supply and fixing in replacement of White Cover Plate with Frame 02 module Complete all as specified and directed.

Supply only for replacement of 2' x 18W Indoor decorative LED Rod extruded Aluminium (powder coated) with opal diffuser,2G11 pin IP20 Complete all as specified and directed.

BMMJ TRADERS AND ENGINEERS

M/S RAJ ENGINEERS

SATISH AND CO