REPAIR/MAINT TO FLOORING, PLASTERING, PLINTH PROTECTION ETC IN CERAIN BLDGS IN WEST WING OF TECH AREA AF STN GWALIOR

Amount

Demollition of cement concrete (unreinforced) including floor tiles, screed bed at ground floors and pavings n. exc 15 cm thick below or above G.L complete all as specified and directed .

M&L 100mm thick cement concrete 1:4:8 Type D2 ( using 40mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C-1, using 20 mm graded stone aggregate as in Plinth protection and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor finish, kerbs, benching and coping, slightly rounded chamfered angles and throating incl necessary form work.

M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for grinding and polishing (Granite finish polish) to existing marble and kota stone flooring/ skirting including minor repair work and filling the joints with cement and pigmet etc complete all as per directed by Engr-in-charge.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on brick work or concrete surface in cement moratar 1:4 complete all as specified and directed.

M&L for 8 to 9mm thick double charged coloured vitrified tiles (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement match with tiles over 15mm thick screed bed in CM 1:6 to complete all as specified and directed.

All as per item No.9 here in before but as in skirting etc. but over 10 mm thick rendering or bedding in layer of mortar fo in cement plaster 1:4 includin necessary cutting complete all as specified and directed.

Demolition of stone slabs and paver tiles of any description or thickness in floors, aprons etc laid in any type of mortor complete all as specified and directed.

M&L for 15-17 mm thick Granite work (table rubbed and polished) in floors, steps pillar, platform or oval shape wash hand basin including cutting to fit the WHB, partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Marble stone work 16 to 18mm thick (table rubbed and polished) in floor, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment over 15mm thick screed bed in CM 1:6 complete all as specified and directed. Note: Marble stone Colour /Shade will be approved by GE.

M&L for designer Parking tiles of size 300x300x10mm thick any colour and shape with grey cement and pigment set, jointed and pointed on neat cement slurry as in floors including 20 mm thick screed bed with bedding layer in CM (1:6) complete all as specified and directed. Make DUROTA, JOHNSON, ORIENTBELL, SOMANY etc

M&L for 80mm thick factory made cement concrete paver block with approved colour, design & pattern as in footparth, parks, lawns, drive ways or parking etc, over and including 30 mm thick compacted bed of fine sand/stone dust compacting, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. Make: ISI Marked as Approved by GE.

All as per item No 15 above but 60mm thickness.

All as per item No 14 &15 but except paver blocks.

M&L for 10 mm thick premium coloured ceramic tiles (square/ rectangular) area of each tile exc 0.36 sqm but n.exc 1.00 sqm , in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement match with tiles over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per item No.18 here-in- before but as in skirting etc. over and including 10 mm thick rendering in CM 1:4 .

M&L for factory made kerb stone of M-25 grade of cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) incl demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.

M&L for 15mm thick rendering on brick masonry walls in CM 1:4 finished even and smooth without using extra cement

M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed including taking down cement plaster on brick surface or stone including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Preparation of newly plastered surface and applying two coat of weather coat exterior emulsion white or tinted over a coat of primer as approved complete all as specified and directed.

M&L for stainless steel (ISI Marked Grade 304) railing, sign board post etc made of hollow tubes, channels, plates, chain etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of wall, floor or the side of waist slab with suitable arrangement.

M&L for stainless steel decorative ball/globes and bottom cover (ISI Marked Grade 304) railing suitable for fixing to 75mm dia SS pipe in railing etc., including welding, grinding, buffing, polishing and fitting the same with necessary stainless steel bolts etc. of required size all as directed by Engr-in-Charge.

M&L 16mm thick 600x600mm size false ceiling boards with approved pattern (DUNE RH-99 Armstrong) including pre powder coated GI frame with suspension system (Grid) comprising of T section 25mmx32.5mm x1.6mm size as main runners and wall angle to placed along the wall at desired level of the False ceiling 4mm dia GI suspender of suitable size and dash fastners to be provided at desired distance including re-fixing false ceiling lights, electric fittings/fixture etc including dismantling of existing false ceiling with snap grid, cover fillets etc. complete all as specified and directed.

S&F 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic ) decorative finish fixed with screws to snap grid including pre powder coated GI frame with suspension system (Grid) comprising of T section 25mmx32.5mmx1.6mm size as main runners and wall angle to placed along the wall at desired level of the False ceiling , 4mm dia GI suspender of suitable size and dash fastners to be provided at desired distance including re-fixing false ceiling lights, electric fittings/fixture etc including dismantling of existing false ceiling with snap grid, cover fillets etc. complete all as specified and directed.

S&F in repairs 100 mm Brass Mortice lock 4 lever, vertical type, suitable for auminium doors Make : Godrej Harrison, Link etc

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel.

S&F in repairs Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg.

S&F in repairs 3mm thick PVC tiles/ sheets as in flooring, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive complete all as specified and directed by Engr-Charge. Makes :- Wonderfloor, Marvel Vinyl or as per Appendix 'B' to PS.

S&F Stainless steel curtain rod standard size 2mm thickness fixed to wall fixed with rawal plug and zinc screws complete all as specified and directed.

S&F Stainless steel decorative choice end SS bracket and globe for fixing with curtain rods complete all as specified and directed.

Taking down shutters of any description exc 1Sqm but n. exc 2 Sqm each and refixing the same in same opening including necessary cutting, repairing, easing with reqd screws complete all as specified & directed.

Taking down chowkats with shutters (without taking off shutters from the frames) of any description exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified & directed

S&F Powder coated aluminium frame for door, window, ventilators and partitions/shutters with extruded built up standard tubular sections with necessary jointing aluminium cleats using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.

S&F Powder coated aluminium door shutters with extruded built up standard tubular sections using aluminium sec not less than 2.00 mm thick, (shutter with styles 85mmX44.45mm, top rails 83.5mmX44.45mm , intermediate rail 83.5mmx44.45mm, bottom rail 114.3mmx44.5mm) fixing to frame including 5mm thick tinted glass at top pannel and 4mm thick ACP sheet at bottom with rubber neoprene gasket and aluminium beading, 02 Nos 200mm Handle, 01 Nos 300mm long sliding door bolt and 01 Nos 150mm tower bolt to each shutter using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.

S&F Powder coated aluminium sliding windows shutters with extruded built up standard tubular sections (using aluminium sec not less than 1.5mm thick), fixing to frame including 4mm thick tinted glass with rubber neoprene gasket, 02 Nos sliding rollers at bottom, PVC locking arrangement to each shutter using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.

S&F in repair rubber neoprene packing to aluminium door and windows for fixing glass including aluminium beading in position complete all as specified and as directed.

S&F 12mm thick tinted glass door shutter, fixed to aluminium section at top and bottom and similar work and sealed with sealent, making holes for handle and fixing including hacking out old broken glass from the frame complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old treated wooden surfaces materials of any description, including cleaning scrubbing with sand paper to make the surface smooth and a coat of wood filler and applying french polish in one or more coats to the required texure and glossy finish complete all as specified and directed.

M&L for Preparation of old decorated surface of wall, brooming, scrapping loose layers , smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, with steel scrapers including filling the cracks and depressions with wall putty and applying one coat of distemper oil emulsion with Roller white or tinted as approved complete all as specified and directed.

M&L for Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers and applying a coat of wall putty and applying two coats distemper oil emulsion with Roller over a coat of primer all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coats exterior weather proof Paint including filling cracks/depressions with wall putty to make the adjacent surface even and smooth complete all as specified and directed.

USHA TRADERS

GWALIOR TRADE LINK

M/s Gulshan and Brothers

M/s Bansal Brothers and Co.

M/S NIRMAL SINGH DHANJAL

M/s Jai Durga Construction

Sunil Traders

m/s vikash Engineers

M/S YOGANSH CONSTRUCTION CO.

GANGA AND SONS

M/s. Ravi and brothers

R.B. ENTERPRISES