REPAIR REPLACEMENT OF OLD SEWAGE LINE CLEANING AND MAINT OF OLD SEWAGE LINE SEPTIC TANK SOAKAGE WELL MAINT OF MANHOLE MANHOLE COVER FOOTPATH FENCING BOUNDARY WALL AND MISC B/R WORK AND REAPAIR AND MAINT TO DRAIN CULVERT FOOTPAH FENCING BOUNDARY WALL

Amount

Blocking up the entry of septic tank of the following capacities and pumping out effluent dirty liquid and sludge from sludge chambers of septic tank (including settling tank and intercepting chambers etc up to bottom) collecting sludge in closed cart and removing away and cleaning the septic tank with clean water and opening entry sewage line for re-use and removing sludge from the premises (outside to MOD Land) complete all as specified and directed. (The rate included for excavation of barrow pits for burying of removed sludge under the ground and making good the excavated earth to a true surfaces). :-

Septic tank for 100 users.

Septic tank for 50 users.

Septic tank for 25 users.

Septic tank for 10 users.

Septic tank for 500 users.

Cleaning of blocked sewage line of the following dia by using bamboo sticks or MS rods and revolving with rope inside the sewer line between two manholes and cleaning the sewer line with fresh water including taking out sludge complete all as specified and directed.

150 mm dia complete all as specified and directed.

200 mm dia complete all as specified and directed.

M&L for dewatering of efflorescent from soak well of any capacity by means of 7.5 HP non clogging diesel driven pump (including necessary fuel and T&P etc) in nearest drain complete all as specified and directed .

Blocking up the entry of manholes of any size depth and pumping out effluent dirty liquid and sludge from bottom of manholes including collecting sludge and dirty liquid into closed container and cleaning the manholes with fresh water after wards opening the inlet of manhole for re-use and removing the sludge to outside premises complete all as specified and directed.

Cleaning of blockage of WC /GullyTrap/Nahani Trap/Floor Ttrap any other similar kind of items complete all as specified and directed.

M&L for Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep in soft/loose soil for drain pipes, manholes etc complete all as specified and directed.

The same as per serial item No. 6 above but depth exc 1.50 M and not exc 3.00 m complete all as specified and directed.

Returning filling in any type of soil including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing excavated materials to a distance exc 1.50 KM but not exc 5.00 KM and depositing where directed complete all as specified and directed.

Demolition of cement concrete bed in haunching and breaking up drain pipes SGSW set in cement mortar of the following dia.

150mm dia complete all as specified and directed.

200mm dia complete all as specified and directed.

300mm dia complete all as specified and directed.

Demolition of brick work of any description built in cement mortar including all quoins, arches but excluding pre-cast articles etc complete all as specified and directed.

Taking down cement plaster of any description from brick wall/concrete surface etc including raking out joints hacking for key srcubbing down with water etc complete all as specified and directed.

M&L for concrete bed in PCC 1:4:8 type D2 (using 40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing complete all as specified and directed for the following dia of pipes.

150mm dia

200mm dia

M&L for SGSW (Grade 'A') drain pipes confirming to IS laid in trenches and jointed with CM 1:2 complete all as specified and directed for the following internal dia of pipes.

150mm dia

200mm dia

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for plain cement concrete 1:3:6 Type C2 using 40mm graded stone aggregate as in foundation filling and mass concrete for manholes, Septic tanks & drains and for similar work complete all as specified and directed.

M&L for brick work with old size bricks (sub class 'B' bricks) straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

The same as per item No. 17 above, but except bricks.

M&L for plain Cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in roof curb mud stops ,coping benching and surface channel and for similar work including necessary formwork complete all as specified and directed.

Extra for forming fair finished drain or channel Upto 30 cm inner grith using extra cement including forms moulds etc complete all as specified and directed.

M&L for precast RCC 1:2:4 Type B-1(using 20mm graded stone aggregate) as in manholes covers including form work etc set in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete sufaces complete all as specified and directed.

M&L for MS TMT bar 5mm dia & over up to 10mm dia for distribution bar,stirrups, spacer etc ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for MS TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed.

Taking down PVC/AC pipes upto 110mm bore(including all fittings) with spigot & socket encls & lead joints incl burning out joints complete all as specified and directed.

Supply and fixing PVC (SWR) 110mm bore pipe single socketed, in any length with rubber ring joints sealed with approved adhesive and fixed on wall or in floor complete all as specified and directed.

Supply and fixing PVC (SWR) 75mm bore pipe single socketed, in any length with rubber ring joints sealed with approved adhesive and fixed on wall or in floor complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F PVC ( SWR ) bends 110 mm bore of any radius complete all as specified and directed.

S&F PVC ( SWR ) single T equal or unequal of size 110 mm bore complete all as specified and directed.

S&F in repir vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest (including lime concrete bedding) complete all as specified and directed.

S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float & handle including brackets and flush pipe 32 mm dia complete all as specified and directed.

S&F 600 mm long PVC connection PTMT 15 mm size complete all as specified and directed.

S&F in repair 15mm dia Stop valves/angle valve, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore bib tap fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Taking up or down steel tubing and connections, of 15mm dia including cleaning for re- fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing and connections,of 20mm dia including cleaning for re- fixing or removal to store complete all as specified and directed.

S&F 15 mm bore GI Tubing medium grade fixed to walls, ceilings or laying in floors complete all as specified and directed.

S&F 20 mm bore GI Tubing medium grade fixed to walls, ceilings or laying in floors complete all as specified and directed.

Dismantling of floor, hearth or walls tiles including cement mortar bedding but not backing and rubbish off permises complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed.

M & L for coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick scred bed in cement mortar 1:6 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles (350x250x7 mm/450x350x7mm) on vertical surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L reinforced cement concrete (M-25 Nominal mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Form work to rough finished flat surfaces as in soffits of suspended slabs such as roof slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Demolition of reinforcenemt cement concrete above the ground floors, post of boundary wall angle n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L two coats of cement base paint over one coat of primer on wall including preparation of newly plastered surfaces complete all as specified and directed.

M&L 15mm thick rendering on fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth finishing (without using extra cement) complete all as specified and directed.

M&L for two coats of weather coat paint (apex) on Old/new plastered surfaces of wall including preparation plastered surfaces complete all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc and similar work conforming to FE 410--0 or FE 310-0 complete all as specified and directed.

S&F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire stapples or steel pins etc complete all as specified and directed. (each line wire to be measured).

M&L two coat synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10cm in width or girth not otherwise described including preparation of surfaces complete all as specified and directed.

M&L 25 mm thick plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in Sub Floors,coping, surface channels etc complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finishing even & smooth without using extra cement laid in bays with construction complete all as specified and directed.

Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for columns, beams, lintels etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

The same as per item No. 57 above but except bricks.

M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L plain cement concrete nominal mix 1:3:6 type B-1 using 20mm graded stone aggreagate as in surface channel drain including neccssary form work as required complete all as specified as directed.

M&L 40 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface even & smooth without using extra cement complete all as specified and directed.

Supply only Glass dividing strips, 3 mm thick and 28 mm wide complete all as specified and directed.

M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Dismantling of tiles/stone slabs of any description or thickness, laid dry or laid dry and pointed in floors, aprons etc

M&L for Chequered cement concrete tiles (in any shade) 25cmx25cmx25mm thick, set, jointed and pointed with grey cement and pigment in floors over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified heavy duty (dura stone) tiles 300x300x7 to 8 mm thick in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L 15 mm thick rendering on other than fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L Preparing old painted surfaces of walls, pillars etc by washing rubbing down and stopping and applying one coat of cement base paint white or tinted complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-W (Gde-E-250) quality-A,

Dismantling posts or struts (wood or steel or RCC) any section including taking out embedded portion and making good disturbed ground surfaces.

Dismantling of fencing wire mesh of any type as directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 mtr and making good surface in soft/loose soil.

S&F MS work conforming to Fe 310-O as in FI fillets for securing chain link fencing, angle iron horns, posts, etc cut to length bent to shape with necessary cuts, drilling holes etc all as specified.

Supply only chain link fencing of MS GI wire mesh, 4mm dia of GI wire mesh up to into mattresses or cages lapped wired incl. staple etc complete all as specified and directed.

Fixing only chain link fencing of any mesh size/any type incl. link wire to any type of standard rails/supports etc & straining bolt etc incl. provision of binding wire complete all as specified and directed.

Supply only MS round bar 10mm dia conforming to Fe 290 Gde E-165 as line wire for chain link fencing. Note : Cutting to length, bent to shape required including binding with MS wire is included in item No. 77 here in before.

S&F in repair mild steel, screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but not exceeding 10cm long and dia of shank 05 to 10mm all as specified and directed.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete as directed.

M&L 300mm dia Reinforced concrete pipes, class NP2, laid and jointed on concrete bed including PCC 1:4:8 type D-2( using 40mm graded crushed stone aggregate) packing under and haunching against the side of pipe after they are laid and tested complete with collars all as specified and directed.

S&F EWC sheet cover with clip complete all as spd and directed.

S&F EWC/IWC 'P' or 'S' trap of size 110mm complete all as specified and directed.

S&F flushing cistern long bend complete all as specified and directed.

S&F PVC (SWR) door bends 110mm bore of any radius complete all as specified and directed.

S&F PVC (SWR) single door T equal or unequal of size 110mm bore complete all as specified and directed.

M/s Naresh Chand Agrawal (BID ID -3389949)

M/S Priya Trading Agency (BID ID -3385647)

SINHA CONSTRUCTION (BID ID -3389314)

M/S SAROJ KUMAR SINGH (BID ID -3389128)