REPAIR OF ROOF, ROOF TREATMENT, JOINERY, FLOORING, SANITARY, PLUMBING, PLASTERING AND OTHER B/R ITEMS IN CARIAPPA OFFRS ENCLAVE, KV COMPLEX, MH, MDC, ECHS, 17 CDU, 17 CIB, GE OFFICE COMPLEX, BSO AND ADJACENT AREA IN AOR OF AGE B/R I UNDER GE PANAGAR

Amount

M&L for resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each complete all as specified and directed by Engr-in-Charge

M&L for resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engr-in-Charge

Taking down chowkat or frame with shutters n.exe 1.50 Sqm (without taking of shutter from frame) each complete all as specified and directed

Taking down chowkat or frame with shutters exc 1.50 Sqm and n.exc n4 sqm (without taking of shutter from frame) each complete all as specified and directed

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

S&F 35mm thick 2nd class hardwood, factory made plain framed, panelled shutters (two panel), with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specifiedd and directed by Engr-In-Charge.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood panels, commercial type on both sides complete all as specified and directed

S&F 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specifiedd and directed by Engr-In-Charge .

M&L for Pieces with 1st class Hardwood, small let in for making good where hinges, etc. have been removed from chowkats or frames, joinery, etc. including painting or oiling to match, if required complete all as specified and directed

S&F Beads in doors/window, straight (any size) for glazed/wire mesh or gauzed joinery made of 1st class Hardwood, renewed, including mitres etc and removing old beads to Store complete all as specified and directed .

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including Aluminium snap beading for glazing/ paneling, all complete as per architectural drawings and the directions of Engr-in-Charge.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in- charge.

S&F Factory made single extruded WPC (Wood polymer composite ) solid door/window and others frames/chowkat of size 50mmx125 mm double shutter comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres and non toxic additives fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750kg/cum and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-charge.

S&F Factory made single extruded WPC (Wood polymer composite ) solid Plain flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade ), calcium carbonate and natural fibres and non toxic additives having minimum density of 650kg/cum and with property of being termite/borerproof,water/moisture proof and fire retardent and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete as per direction of Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F stainless steel Butt hinges100mm long Heavy weight ,cold rolled complete all as specified and as directed.

S&F in repair Brass CP bracket fancy type suitable for fixing of 25 mm dia curtain rods complete all as specified and as directed.

S&F in repair MS PVC sheeted/powder coated bracket size 150 mm made to shape suitable for holding curtain/drapery rod of 25 mm dia fixed with PVC rawl plugs and MS steel screws for single/double rods complete all as specified and as directed.

S&F in repair 25 mm dia Stainless steel curtain rod complete all as specified and as directed.

S&F door bottom sealing 1-1.5 m in length rubber fixed below aluminium or wooden door complete all as specified and as directed.

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 150 mm complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified and as directed.

M&L for sheet glass 5.5 mm thick ordinary quality and glazing with oil putty and pin in square exc 0.50 sqm in each pan complete all as specified and as directed.

S&F in repair 2mm thick plain fibre sheet fixed to frame iron work or in claddings/similar works with screws or nut bolts complete all as specified and as directed.

Dismantling wooden boarding, any description, fixed in any position with nails complete all as specified and as directed.

M&L for Plywood 12 mm thick, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.

S&F Block boards 18/19 mm thick, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face complete all as specified and as directed.

S&F Prelaminated particle board 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

M&L for Repairs to aluminium doors, windows, ventilators etc by replacing its faulty parts to bring its functional conditions complete all as directed by Engr-in-Charge. Note:- Cost of repair parts upto Rs 250/- shall be included for repair of door/window.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section of Fe 410 -W (Gde- E- 250) quality-A Fe with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed

All as per Item No 35.00 mentioned here-in-above but with out glazing bars complete all a specified and directed.

M&L for framed work such as grills etc with ends of bars shouldered or rivited or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Taking down steel tubing having bore of pipe 15 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking down steel tubing having bore of pipe 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F CPVC pipes laid in floors/ trenches with outer dia 15 mm dia with all fittings anf fixtures complete all as specified and directed.

S&F CPVC pipes laid in floors/ trenches with outer dia 20 mm dia with all fittings anf fixtures complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area and rubbish off the premises complete all as specified and directed.

M&L for 1st class quality joints free non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but n. exc 0.11 sqm of approved colour as in floors etc set and joined in neat cement slurry over and including 15mm thick sreed bed of CM (1:4) complete all as specified and directed by Engr-in-Charge. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for Glazed ceramic tiles in vertical surface 350mmx 250mmx 7mm/ 450mmX 350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles including CM (1:3) back coat of mortar 10 mm thick for laying skirting/dado's wall tiles complete all as speciified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for1st class quality joints free non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tiles exc. 0.11 sqm but n. exc 0.18 sqm of approved colour as in floors etc set and joined in neat cement slurry and pointed in white of coloured cement over and including 15mm thick sreed bed of CM (1:6) complete all as specified and directed by EIC. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for vitrified ceramic tiles double chargeed 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand jointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer of CM (1:6) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm cement screed base of CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spd and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for for 25 mm thick chequered cement prepolished concrete tiles of approved size,set ,jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed..

M&L for Brickwork with fly ash old sized bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed.

M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of flooring complete all as specified and directed.

M&L for providing 40mm thick PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection and paving complete all as specified and directed

M&L Rendering 10 mm thick cement plaster in CM (1:6) on brick work or concrete surfaces including finished even and smoothh without usig extra cement complete all as specified and directed

M&L Rendering 15 mm thick with WPC on external surfaces of brick work in CM (1:4) including finished even and smoothh without using extra cement complete all as specified and directed. (Note : WPC will be measured and paid separately)

Supply only Liquid water proofing compound complete all as specified and directed Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika

M&L for Rendering 5mm thick cement plaster in CM (1:3) on concret surfaces as in ceiling, chajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement complete all as specified and directed

M&L for preparing newly plastered surfaces of walls and applying with three coats of white wash on walls complete all as specified and directed

S&F in repairs Chromium plated Shower rose 125mm size with or without swivel joints, any size ,including fixing to steel pipe or union complete all as specified and directed

Welding in repairs exc 2.5cm but n exc 5cm in length with thickness of metal to be welded exc. 20mm but n.exc 25mm complete all as specified and directed

M&L PCC (1:2:4) type B-0 as in bed blocks for hold fast including necesssary formwork complete all as specified and directed

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed

M&L for sheet glass 4 mm thick ordinary quality and glazing with oil putty and pin in square n.exc 0.50 sqm in each pan complete as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks or galvanised wire staples, complete all as specified and as directed.

Dismantling of AC corrugated, semi corrugated sheets of any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Dismantling wall and ceiling board of any descrition complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified

S&F Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed

S&F Non asbestos fibre cement designer building boards 6 mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified.

S&F 150 mm long extruded aluminium alloy handles, cast type, anodised complete all as specified.

S&F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed.

M&L for preparation of wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer of any description, not otherwise described, over 10cm width or girth complete all as specified and directed

M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed

Glass dividing strips ,38mmx3 mm thick and inserted in position to confirm the design complete all as specified and directed

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Marble work 18mm to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified and directed

S&F in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm complete all as specified and directed Make: Prayag/Nirali/Parryware

S&F in repair Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long scrwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete complete all as specified and directed.

S&F in repair PVC connection 15 mm size PTMT nuts of length ength 600 mm complete all as specified and directed

M&L for removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items complete all as specified and directed.

M&L PCC(1:2:4) type B-0 (using 20mm graded stone aggregate) as in roof kerbs or mud stop rounded complete all as specified and directed

M&L for 25 mm thick average PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in padding concrete on roof all as directed by Engineer- in-Charge.

M&L for rendering 10mm thick on fair faces on roof surfaces of concrete in CM (1:4) finished even and smooth without using extra cement and WPC complete all as specified and directed.

M&L for preparation of new surfaces of roof and applying two coats of Polyurethane(PU) accrylic based water proofing liquied compound over and including one coat of self priming primer @ one litre per 10 sqm with reiforcing fabricc sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and as directed by the Engr-in-Charge. Note : As per description of this item, minimum two cots of Polyurethane (PU) acrylic based wate proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instrucions more coats of Polyerethane (PU) acrylic based waterr proofing liquid compound and primer are required for roof treatment. (ii) Quoted rate shall be included for work in building/struture of any height. (iii) To be applied by uthorised applicator.

S&F for Mild Steel wk as in framed roof trusses, purlins, rails and fristing incl distances pieces, cleats etc conforming to Fe 410 - O or Fe 310-O complete all as specified and directed

S&F for Mild Steel wind ties for roof including securing bolts complete all as specified and directed

S&F chicken wire mesh for plaster at cracked beam column junctions with brick wall,cutting the grooves in wall , embedding 20 mm dia iron nut bolts across the wall ,plastering in CM (1:3) and similar activities all as specified and directed by Engr- in - Charge.

Supply and applying Silicon sealant compound in required width of joints with a maximum depth of 50 mm of surface complete all as specified and directed

S&F in repairs closet Vitreous china squatting pan Orissa pattern of size 580mmx440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device all as specified and directed.

Supply & fix in repairs vitreous china wash basin, white, flat back, size, 550mmX400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specifid and direted.

S&F in repair Vitreous China bowl urinal flat back, size of 465mm x 355mm x 265 mm white minimum), with grating and union for discharge pipe(back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed

S&F in repair PVC waste pipe 32mm dia for wash basin and sink 01 mtr to 3 mtr as per tequred with cap complete all as specified and directed

S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms complete all as specified and directed

S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) suitable urinal . (Minimum weight 32mm-45gms/40mm-60 gms complete all as specified and directed

S&F in repair 150mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with clamps and jointed complete all as specified and as directed by Engr-in-Charge.

S&F in repair 150mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 10 ltrs PVC valveless, syphonicaction type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge.

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

N B CONSTRUCTION

Jaibalaji Enterprise

M/s sadhan kumar mukherjee