Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC SHAMSHU COMPLEX FORT ROAD LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹8.5 L+₹19,040 (2.28%)Rejected-AOC LEH 194101 | LEH | LEH | LADAKH | 194101 | L2 | Rejected-AOC Being not lowest bidder |
Tender Value
₹9.1 L
EMD Value
₹20,000
Closing Date
28 Oct 2024, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) NIMU
AGE (I) NIMU PIN-901312 C/O 56 APO
SPL REPAIR TO JCO LIVING BLDG NO T258 AND T259 AT 286 MED REGT AT NURLA MIL STN UNDER AGE (I) NIMU
2024_MES_677726_1
AGE(I)/NIT-11/2024-25
Open Tender
Civil Works
Item Rate
180 days
NIMU
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
AGE (I) NIMU
₹20,000
9 May 2025
3 Oct 2024
29 Oct 2024
3 Oct 2024
28 Oct 2024
9 Oct 2024
Amount
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L Non-skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 over 25mm thick PCC bed in PCC 1:2:4 ( type B-0) prepare to recd top layer complete all as specified
M&L Virified Ceramic tiles Light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 over 25mm thick PCC bed in PCC 1:2:4 ( type B-0) prepare to recd top layer complete all as specified.
Dismantling water tanks upto 500 litres capacity complete all as specified and directed by Engr-in charge.
S&F 500 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, three layers) hoisted and fixed in position complete all as specified complete all as specified and directed by Engr-in charge.
S&F 20mm dia PTMT nipple suitable for water tank complete all as specified and directed by Engr-in charge.
Taking up/down 15mm bore old tubing on walls and connection of size 15mm bore complete all as specified and as directed complete all as specified and directed by Engr-in charge.
M&L 20mm outer dia of (3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etccomplete all as specified and directed by Engr-in charge.
S& F in repair 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in charge.
Supply only for 15mm PVC connection of 600mm long complete all as specified and directed by Engr-in charge.
Supply only for 15mm PVC connection of 600mm long complete all as specified and directed by Engr-in charge.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.
S&F in repair 20mm dia CP single towel rail 600mm long D type incl a pair brackets fixed to wall complete all as specified
S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type complete all as specified and directed by Engr-in charge.
S&F in repair 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in charge.
S&F in repair 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in charge.
S & F in repair PVC valveless, syphonic action type, flushing cistern 10 lts capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in charge.
S&F in repair washdown water closet orissa pattern size 580 x 440 mm white with integral foot rest and trap, including connection to drain and to flushing pipe including making good to floor and flush pipe and joint between flushing pipe and socket of wepan complete all as specified and directed by Engr-in charge.
S&F in repair vitreous china wash basin white flat back size 550x400mm (including tap, waste chain and plug and porcelain stopper and brackets all complete complete all as specified and directed by Engr-in charge.
S & F 32mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.
S&F in repair 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in charge.
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in charge.
Demolition and breaking up drain pipes ( salt glazed ware , AC, PVC or reinforced conc ) set in cement mortar of internal dia 75-100mm incl any earth work and demolition of PCC, complete all as specified.
PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe.
PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 75mm bore pipe.
PVC (SWR) bends any radius of 110mm bore
PVC (SWR) branch piece, single ( single Y ) equal or unequal of 110mm bore
PVC (SWR) 'P' trap 110/110 mm bore
PVC (SWR) bends any radius of 75mm bore
PVC (SWR) branch piece, single ( single Y ) equal or unequal of 75mm bore
S & F Grating round 100 mm size of PTMT. (Minimum weight 50gms) complete all as specified and directed by Engr-in charge.
PVC (SWR) floor trap, plain with grating incl jointing with solvent cement of 75mm bore
Taking down carefully aluminium point wiring light, fan socket or power complete fitting such as switches, ceiling rose, fan regulator, socket including light fitting etc complete with MS conduit and T/W battern and depositing to MES store yard all as specified and as directed by Engineer-in-Charge.
M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc One light point/one fan point controlled by one switch all as directed.
M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc One 3 pin 5 amps socket outlet independent with cables 1.5 sqmm size all as directed.
M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc One 3 pin 5 amp socket outlet on same board. all as directed.
All same as per item No 37 above but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable.
S&F in Repair switch Socket Combination 2 in 1, 3 pin, 15/16 amp flush type Universal complete all as specified and directed.
S&F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.
S&F in repair socket 2 in 1, 5 pin, 5 Amp flush type complete all as specified and directed.
S & F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.
M&L in repair for ceiling rose surface Bakelite 65x50mm two to three terminal complete all as specified and as directed by Engr-in-Charge.
S&F in repair basic all purpose surface and wall mounted LED batten ricya is a 20W three color CCT change LED batten which can change the color of batten from warm white to natural white to cool white with the help of a simple toggle switch 4 feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge. Havells Cat Pt No-LHEXAXPNIN1W020 or equivalent in Philips/Crompton.
S&F in repair basic all purpose surface and wall mounted LED batten Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED prode Plus Neo Batten 10W 6500 K 2feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge. Havells Cat Pt No-LHEXACP7IN1W010 or equivalent in Philips/Crompton.
S&F in repair Decorative wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. Complete all as per specified and as directed by Engr-in-Charge. Havells Cat Pt No-LHFOAJE1TZ1I060 or equivalent in Philips/Crompton.
S&F in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete.
S&F in repair sheet metal powder coated versatile Double door SPN distribution board, 12 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz .
M&L in repair for MCB SPN 63 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F in repairs to MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
Supply and fixing in repair 1100 Volts grade heavy duty cable PVC insulated aluminimum conductor of size 16 Sq mm twin core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, flat or circular all as specified and directed.
Dismantling and Taking down old u/s street / building sequrity Light fittings from poles, flood lights, post top lantern lights and garden lights for replacement with LED fittings all as specified and as directed by Engr in Charge.
Supply & fix electric water heater, storage type steel body with copper inner tank and heating element susch as safety valve, thermostate, NRV, connection piece etc.
Supply and install Superb Street Light 50W 6500K IP65 with best in class design & Robust heat sink alogwith class leading IP, IK & Surge protections for long lasting performance all as specified and as directed by Engr-in-Charge. Make: Havells Cat Pt No-LHETAVU7PA7J050 or equivalent in Philips/Crompton.
M&L for GI bracket 1.5 mtr long made out of GI pipe 40mm dia bend to suitable radius incl clamps nuts bolts washers incl painting with aluminum paint etc complete all as specified and directed by Engr in charge.
Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified.
M/S TSERING ANGCHOK (BID ID -3150140)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .