Annual Maintenance Plan for the year 2021 22 for Patta Joharji road in Km 0/00 to 8/00

Amount

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg (zero point two seven five kilogramme) per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (five zero three) and as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges.

Providing, laying, spreading by mechanical means and compacting stone aggregates of specific sizes 53mm to 22.40 mm (Fifty three millimetre to Twenty two point four zero millimetre)grading - III 75mm (Seventy five millimetre) consolidated thick to water bound macadam specification by mechanical means including spreading in uniform thickness, using template, hand packing, rolling with smooth wheel roller 80-100 kN (Eighty to hundred) static rollar in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2mm (Eleven point two millimetre) nominal size at the rate 0.18 cuM (Zero point one eight cubic metre) per ten square metre and to fill-up the interstices of coarse aggrregate, watering and compacting to the required density as per MORD Technical Specification Clause 405, as per direction of Engineer-in-Charge including carriage of all labour, equipment and material to various location through all modes of transportation in all lead, lift and all incidental charges.

Providing and laying 30mm thick Bituminous Concrete with 100-120 (One Hundred to One hundred Twenty) TPH batch type hot mix plant producing an average output of 75 (Seventy Five) tonnes per Hour using crushed aggregates of specified aggregates of specified grading, premixed with ituminous binder @ 5.50 (Five point Five Zero) per cent of mix and filler, transporting the hot mix o work site, laying with hydrostatic paver finisher with sensor control t the required grade, level and alignment, rollign with smooth wheeled, viberatory and tenden rllers to ahieve the desired compaction as per MORT&H specification clause No. 509 complete in all respects and as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges.

Providing and laying of hot applied thermoplastic compound 2.5 mm (two point five milimeters) thick and 0.10 (point one zero) meter wide strip in Center line / Edge line including reflectorising glass beads @ 250 gms ( two fifty grammes) per square meter area, thickness of 2.5 mm (two point five milimeters) is exclusive of surface applied glass beads as per IRC:35 (thirty five) in accordance with Ministory of Road Transport Specification (Latest revision) and IRC Code. The finished surface to be level, uniform and free from streaks and holes including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges

Hardeep Singh Bedi

Asphalt Carpet Construction Company