SPL REPAIR OF PERIMETER WALL (APPROX 300 METER OF LENGTH) AT 25 WEU UNDER GE (EAST) LUCKNOW.

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Removing surplus excavated material (soil) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

M & L for plain cement concrete, 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for RCC M25 (20mm graded stone aggregate) design mix as in foundation, including raft footings, foundation beams, plinth beams bases for columns etc complete all as specified and as directed.

M&L for RCC M25 (20mm graded stone aggregate) design mix as beams etc.

M&L for RCC M25 (20mm graded stone aggregate) design mix as columns.

M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

Formwork to sides and soffits of lintels & beams including supports overhangs etc with rough finished surfaces of concrete.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in radius built in cement mortar 1:6 all as directed by the Engr-in-Charge.

M&L for 15mm thick rendering in CM 1:4 with on fair surfaces of walls finished even and smooth without using extra cement complete all as specified.

M&L for Preparation of old surfaces of wall & applying two coat of cement base paint of approved shade/tint complete all as specified.

S&F for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc,) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S & F of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc. ( Each line wire to be measured) complete all as specified and directed.

S&F concertina coil 600mm dia of approved quality fixed with clips or clamps on angles and wall etc all as specified and directed

M & L for preparation of new or previously un-treated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Matrubhoomi Construction (BID ID -3275643)

QUALITY CONSTRUCTIONS CO (BID ID -3275303)

M/s Ram Singh Agarwal (BID ID -3274853)

R K CONTRACTOR AND SUPPLIERS (BID ID -3278875)

RAFAKAT HUSSAIN GENERAL CONTRACTOR (BID ID -3278869)