MID/AN/79

Providing/Fitting by way of Supply & installation/Testing and commissioning of Gantry with allied works at LIS Kotgarhi L/L. The job involves earth work for excavation of trenches 2 nos. of size 1mx01mx1.3m at LIS Kotgarhi L/L and removal excavated material and disposing of same at permissible dumping place. The job involves construction of RCC Concrete blocks 2Nos. of Size (0.5m x 0.5m x 1 m) adjacent to the suction pipes for anchoring of vertical square sections. Laying of crushed stones 40mm with one layer of 1:2:4 concrete mass, 4” depth, providing and laying of mesh created out of M.S angle (40 x 40 x 6 mm) throughout the blocks after laying of 1:1.5:3 concrete mass to be done at site. Providing and fitting of suitable no. of vertical steel members for all blocks and cement concrete to be properly grouted in the blocks with complete plastering/finishing including engagement of laborers for complete job at site with transport charges for shifting of material at site including curing of 2 no. blocks. Complete Job Fabrication of 2 Nos. 18feet height vertical square section of size (0.3m x 0.3m) out of M.S angle of 40x40x6mm size at the base including erection of the square sections by providing/fitting of 4 no M.S Plates of size (1′x1′) at the top as well as bottom of the columns. The job involves shifting of fabricated square section from the workshop to the roadside near the station by engaging transport and then further shifting to the site of installation by head load. Erection of the 2 nos. square sections by anchoring them in the RCC concrete. The job involves providing and fitting of Girder of specification (ISMB 150) measuring 20 feet and welding it on the top of two square sections by lifting and placing it on sections. Making of horizontal movement mechanism on the overhead gantry for its testing and commissioning. The job includes the cost of materials from various sources of locations of availability in the market, cost of hire charges against shuttering material, plastering / finishing, cutting, laying and binding of steel and M.S steel angles and channel of suitable size etc. ,labour charges for fabrication of structure for overhead gantry and welding set & Oxy-acetylene gas equipment, skilled /semiskilled labour charges at the site of installation including welding by using suitable electrodes as per IS standards (8no.size).The job also includes providing/ fitting/ installation, testing and commissioning of Gantry with 3 ton chain pulley block along with trolley at already installed Girder duly laid on vertical columns including loading and unloading and transport charges during carriage of other allied materials including chain pulley block at site with cost of complete installation charges etc at site. Complete job Fabrication of working platform to suction side at LIS Kotgarhi L/L. The job includes providing/fabrication of working platform (2.5x15x4) feet out of M.S angle (50x50x6 mm size ) for 6 no. vertical support (4feet each) and rectangular frame out of M.S angle (50x50x6 mm size), welding of M.S flat of (25x3) mm over M.S Angle frame . The job includes the cost of materials from various sources of locations of availability in the market, cost of hire charges of tool and tackles, M.S steel angles and flat of suitable size etc. ,labour charges for fabrication of structure and welding set & Oxy-acetylene gas equipment, skilled /semiskilled labour charges at the site of installation including welding by using suitable electrodes as per IS standards (8no.size) complete Job Providing/fitting of 200 mm diameter and 150 mm Foot valves of pumping unit At LIS Kotgarhi L/L after replacing the existing damaged foot valve by way of extracting of foot from the canal by cutting rusted nuts, bolts with gas cutter by using manual labour and suitable tools & tackles. The job involves shifting of 200 mm diameter and 150 mm foot valve to site of LIS by using mechanical transport and manual labour . The job includes welding of the new flange on the suction pipe .The job also includes lowering of the foot valve into the canal and fitting of foot valve on the suction pipeline of pumping unit with rubber gaskets , nuts and bolts by using skilled labour and suitable tools & tackles. The job includes the cost of material, carriage and hire charges of material and tools and tackles required for the job, labour charges for skilled and semi skilled labour at site L.I.S. Complete Job

Vaibhav Engineers and Technocrates (BID ID -2230654)

GEETA ENGINEERING MECH WORKS (BID ID -2230847)