REPAIR AND MAINT OF WATER SUPPLY INFRASTRUCTURE AT JALIPA MIL STN UNDER GE (A) BARMER

Amount

Site clearance including clearing away all grass vegetation, saplings,shrubs, brushwood, undergrowth,roots,and trees not exceeding 30 cm in girth( measured at a height of one meter above ground level) and removing entire rubbish out side MD land complete all as specified and as directed.

M&L precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in kerb stone solid block 15 cm thick, 30 cm length and 45 cm depth made to shape with plain fair faces, including chamfers, weatherings, throating and setting in cement motar 1:4 complete all as specified and as directed .

M & L hydraulically pressed concrete tiles 25cm x 25cm x 20-22 mm thick laid over and including screed bed or bedding layer of 15mm thick in CM 1:4 set, jointed and grouted and flush pointed in CM1:3 mixed with WPC as per manufacturer instructions complete all as specified and directed. NOTE :- liquid WPC shall be measured and paid separately under respective item.

M&L Precast cement concrete1:2:4, type B-0 by using 12.5mm graded stone aggregate as in louvres and jallies,40mm thick (measured solid), including all mould- ings but excluding frame,Set in cement mortar CM 1:4 complete all as specified and as directed.

M&L for 100 mm thick PCC 1:2:4 type B-1by using 20mm graded crushed stone aggregate as in floor/hard standing finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D -2 by using 40mm graded crushed stone aggregate as in sub base finishing the surface even and rough without using extra cement complete all as specified and as directed.

Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 sqm each complete all as specified and as directed.

S&F Paritition wall of aluminium andoised glazed with plain transparent sheet glass (modiguard) 5 mm thick fixed with aluminium member of size 63.50 mm X 38.10 mm X 3.18 mm and wt. of member 1.777 kg/ mtr with aluminium strips/beading with rubber gasket distance of verticle hollow section 1.2 mtr height of wall, 1.2 mtr to 1.8 mtr, top, middle & bootom rail of size 63.50 mm X 38.10 mm X 3.18 mm, and shown as on drg fixed on wall with aluminium clip and bolt complete as per site requirement and as specified and directed by Engg-in-charge.

M&L machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006, M-35 Grade, 60 mm thick, with grey cement and pigments, over and including sand cushioning of 25mm thick including dismantling of old paver block complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc including removing rubbish to out side MD land complete all as specified and as directed.

Rendering externally 15 mm thick in cement mortar1:4 mixing with water proofing compound ( WPC) as per manufacturer instructions on stone wall surfaces finished fair and even with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

Rendering internally 15 mm thick in cement mortar1:6 mixing as per manufacturer instructions on stone wall surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for plastering 5 mm thick in CM 1:3 on stone/ concrete surfaces of ceiling , finished even and smooth without using extra cement complete all as specified and as directed. .

Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash to match with the existing surface complete all as specified and as directed.

Preparation of old painted surfaces of walls and applying one coat of cement base paint to match with the existing surface complete all as specified and as directed.

Preparation of new plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over one coat of primer on walls including and over two coat of birla wall care putty complete all as specified and as directed.

Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 not exceeding 4.0 sqm each complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications complete all as directed .

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S&F 150 mm size aluminium anodised handles, caste type, complete all as specified and as directed.

S&F 150mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100mm size aluminium anodised butt hinges of extruded section complete all as specified and as directed.

Dismantling of cast iron / PVC/ RCC pipes of 100mm internal dia including fittings, jointed in cement mortar complete all as specified and as directed.

Dismantling of cast iron / PVC /RCC pipes of 75mm internal dia including fittings, jointed in cement mortar complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps complete all as specified and as directed.

S & F cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trench/floor with and including MS clamps complete all as specified and as directed.

S & F cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trench/floor with and including MS clamps complete all as specified and as directed.

S & F cast iron vent cowls suitable for 100mm dia pipes complete all as specified and as directed.

S & F cast iron branch pieces with ovall access door, single [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches suitable for 100mm bore pipes complete all as specified and as directed.

S & F cast iron branch pieces with ovall access door, single [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches suitable for 75mm bore pipes complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 100mm bore, for cast Iron soil / waste / vent pipes complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 75mm bore, for cast Iron soil / waste / vent pipes complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and as directed.

S&F GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and as directed.

S&F 500 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including taking down old tank complete all as specified and as directed.

S&F in repair stop valves, cast copper alloy, CP fancy type, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 25 mm bore iron pipe or for unions complete all as specified and as directed.

S&F in repair, bib tap, CP fancy type, cast copper alloy with crutch or butter fly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs vitreous china ware wash hand basin, white, flat back of size 300 X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long including pillar tap, cast copper alloy, chromium plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S& F stop valves, 15 mm dia, cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle with long shank and cup [concealed type] for iron pipe etc complete all as specified and as directed.

S & F in repairs white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets and flush pipe of 32mm dia jointed including cutting of floor/ wall and making good with cement mortor 1:3 to match with the existing surfaces complete all as specified and as directed.

S&F in repairs, PVC connections 450mm long, 15mm bore with brass fly and washers on both ends complete all as specified and as directed.

S & Fin repairs 75mm bore cast iron nahani trap with grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and as directed.

Demolition of wall / floor tiling of any description including cement mortar bedding / backing coat and removing rubbish to out side MD Land complete all as specified and as directed.

Glazed coloured ceramic tiles of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed.

Non skid ceramic tiles, coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Non skid ceramic tiles, coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Devi Engineeing

M/s B R Saran Kotda

M/S Dharam Chand Lal Chand Jain