Renovation of Admin Floor, Reception and Adjacent Terrace

Amount

CIVIL WORK IN SCOPE OF INTERIOR WORK Demolition Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. • In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead • For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. • Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : • Thickness above 10 mm up to 25 mm

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge

Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-Charge, beyond 50m initial lead, for all leads including all lifts involved

Renovation work Excavation, Filling & Soling Earth work in excavation by Mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50m and for all lift, as directed by Engineer-in-Charge • All kinds of soil.

Earth work in excavation by Mechanical means (Hydraulic excavator) / manual in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and remaining of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. • All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.

Cement Concrete (Plain/ Reinforced) Reinforced cement concrete work in chimneys, shafts, up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5: 3 (1 cement: 1.5 coarse sand including sand manufactured sand derived from Recycled concrete Aggregate (RCA) up to 20% : 3 graded stone aggregate 20mm nominal size including RCA up to 20%.

Steel reinforcement for RCC work ready to use :cut and bend" rebars of approved make from factory/ workshop to construction site including placing in position and binding all complete above plinth level. •Thermo-Mechanically Treated bars of grade Fe-500D or more.

III Brick Work Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 sand)

IV Plaster Providing internal cement plaster 12mm thick in single coat in fine sand of mix 1:4 (1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing 15mm cement plaster externally on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand)

Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.

V Flooring Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite stone slab of colour black, cherry/ruby red for area of slab up to 0.50sqm for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels

Providing and laying vitrified matt finish tiles having size 800 x 800 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing white cement and matching pigments etc., complete.

Providing and laying Antiskid Vitrified tiles in floor having size 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.

Providing and fixing Ist quality vitrified glazed finished wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of size 300 x 600 mm in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade compete.

VI Door, Windows & Railing Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kh/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 /mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary S.S. screws shall be paid separately).

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing factory made UPVC glazed/wire mesh windows/doors comprising of lead free UPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, UPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of UPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh/ Glazing of plain/ toughened / laminated/ double glass unit with/without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Casement cum fixed panel window having single casement panel at both ends & middle fixed panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above) & mullion (55 mm & above) x (65 mm & above) (Height up to 1.8 metres; each openable shutter up to 0.8m width)

Casement window double panels using R3 series with frame (55mm & above) x (45mm & above) & sash (55mm & above) x (65mm & above) & French (False) mullion (55mm & above) x (60mm & above). (Height up to 1.8 metres) with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. • Using R3 series with frame (55mm & above) x (45mm & above) & sash (55mm & above) x (65mm & above) & (Frenche (False) mullion (55mm & above) x (60mm & above). (Height up to 1.8m).

Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles using R3 series with frame (55 mm & above) x (45 mm & above) & sash/mullion (55 mm & above) x (65 mm & above) (Height above 1.2 metres).

Two track four panels sliding windows with Aluminium channel for roller track, wool pile, zinc alloy (zemak) powder coated handle on three panels along with multi-point locking system, nylon rollers with SS 304 body using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) (Height up to 1.8 m).

Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body using R3 series with frame (98 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system (height up to 1.8 metres).

Providing and fixing in position UPVC fixed window/ ventilator without mullion / transom using R3 series with frame (55mm & above) x (45mm & above). (Height up to 2.5 metres).

Providing and fixing 1m high S.S.304 Grade Stainless steel railing with 60mm diameter and 1.5mm thick at top ,40mm diameter and 1.5mm thick vertical supports spaced at 1.5mcenter to center and 8mm thick toughened glass including fabricating ,fixtures, erecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete

VII Painting Providing and applying lustre finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface ,applying the acrylic wall putti etc. complete.

Providing & applying two coats of satin finish to ceilings.(Asian, Nerolac, ICI make)

Providing and applying two coats of flat oil paint of approved colour and shade to internal/external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade for New Work with two or more coats applied @1.43 ltr / 10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.

VIII False Ceiling Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having NRC (Noise Reduction Coefficient) of 0.50 (minimum) as pe IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-grid of hot dipped galvanized iron section of 0.40 mm thick on silhouette profile, rotary stitched of double webbed white with 6 mm reveal profile (white/black), comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S. screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge with 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm diadia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per drawings, specification and direction of the Engineer-in-Charge but excluding the cost of painting with 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)

IX Structural Steel Steel work in built up tubular (round, square, or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. • Hot finished seamless type tubes

Providing and fixing mild steel round holding down bolts with nuts and washers plates complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. •In stringers, treads, landings etc. of staircases, including use of chequered plate wherever required, all complete.

•In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50mm (base metal) of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120grms. per sqm as per IS:277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15018 micron. Sheet should have protective guard film of 25 micron minimum to avoid scratches during transportation and should be supplied in single length up to 12m or as desired by Engineer-in-charge. The sheet shall e fixed using self drilling/ self tapping screw of size (5.5 x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlin, rafter and trusses and including cutting to size and shape where required.

X Waterproofing Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg. sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

XI Toilet Cubicles BESCO CUBICLE ZMS SS 2003MM : Thickness of Compact Laminate : 12mm Color of HPL Boards: Single Standard Compact Color Special Remarks For Customization Size of Cubicle : As per Drawing (W) X (D) X 2003mm (H) Door Size : 1750mm (H) x 600mm (W) Divider Size : 1820mm (H) Overall Height Of Cubicle : 2003mm (Including bo om Gap of 150mm) Accessories: Standard - Merino Make Aluminium, Stainless Steel - 304 Grade accessories) a) Aluminium "U" Channel b) Aluminium "F" Channel (Only Corner Unit) c) Aluminium Door Stopper Channel d) Aluminium Top Rail e) SS Coat Hook f) SS Privacy Thumb turn c/w Occupancy Indicator g) SS Door Knob h) SS Spring Loaded Bu Hinges with Cover i) SS Adjustable Foot 316 Grade j) Rubber Door Stopper Lining k) Screws & Wall Plugs SPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN standard- 438.

URINAL MODESTY SS : Thickness of Compact Laminate : 12mm Color of HPL Boards: Single Standard and Plain Compact Color Special Remarks For Customiza on : N/A Size of UMP : 500mm (W) X 1200mm (H) Overall Height Of UMP : 1850mm (Including bo om Gap of 650mm) Accessories: Standard - Merino Make Stainless Steel - 304 Grade accessories) - SS a) SS Right Angle Brackets b) Screws & Wall Plugs SPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN standard- 438.

XII MISCELLANEOUS Providing core cutting through slab (up to 125mm thick) as per the instruction including scaffolding, watering, cleaning completed. a) 75mm. Dia

b) 100mm. Dia

c) 125mm. Dia

d) 150mm. Dia

e) 200mm. Dia

Providing core cutting through beam (up to 230mm thick) as per the instruction including scaffolding, watering, cleaning completed. a) 100mm. Dia

b) 125mm. Dia

c) 150mm. Dia

Providing and rebaring reinforcement bar dowel in RCC including drilling hole at required or specified, placing the dowel in position and effectively grouting the hole specified epoxy / chemical grout material (as per manufacturer specification) at all levels incl. scaffolding etc. complete as directed by Architect / engineer Incharge a) 8mm.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.

Providing and fixing of MS fabricated ladder 750 mm wide for water tank having both side hand rail with 50 mm dia. M.S. pipe as required with MS angle, channel, plate, Base plate and fixing the RC beams by fasteners. The walls, junction to have kamproll, resin, waterproofing etc. all MS section with one coat of zinc primer and two coats of approved satin paint (Asian / ICI make) complete. as per drawing and as directed by Architect / engineer Incharge.

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.

C Plumbing Work I Sanitary & C.P. Fittings Tankless wall hung W.C. with sensor flush, UF soft close slim seat cover, hinges, accessories, set, Size:- 360 x 590 x 385 mm

Aquamax Concealed Body Of Single Lever Shower Mixer With 3-Way Diverter, But Without Exposed Parts

Aquamax Exposed Part Kit Of Single Lever Shower Mixer With 3-Way Diverter (Compatible With Ald-783N)

Bathtub Spout With Wall Flange

Maze Overhead Shower 300Mm Round Shape Single Flow (Body & Face Plate Stainless Steel With Chrome Finish) With Rubit Cleaning System

Shower Arm 20Mm Dia & 600Mm Long Round Shape With 90° Bend For Wall Mounted Showers With Flange

Maze Hand Shower Ø95Mm Round Shape Single Flow (Face Plate Stainless Steel & Abs Body In Chrome Finish) With Rubit Cleaning System

Flexible Tube 8Mm Dia. & 1.5M Long With Nuts

Wall Outlet With Shower Hook In Round Shape

Rimless blind installation wall hung WC with UF soft close slim seat.

Metropole Flush Valve Regular 32Mm Size (Concealed Body) With Exposed Shut Off Provision & 100Mm Square Plate

2-Way Bib Cock With Wall Flange

Hand Shower (Health Faucet) With 8Mm Dia 1 Meter Long Flexible Tube And Wall Hook

Table top basin size:- 600 x 380 x 130 mm, Shape:- Rectangular

Laguna tall boy sensor faucet for wash basin with premixed water supply kit (9V. Transformer)

Angular Stop Cock With Wall Flange

Bottle Trap (With Internal Partition) 32Mm Size With 300Mm & 190Mm Long Wall Connection Pipes & Wall Flange

Click Clack Waste 32Mm Size Full Thread With 130Mm Height

Under counter basin with fixing accessories, Size:- 600 x 450 x 170 mm

Laguna sensor faucet for wash basin with premixed water supply kit (9V. Transformer)

Angular Stop Cock With Wall Flange

Bottle Trap (With Internal Partition) 32Mm Size With 300Mm & 190Mm Long Wall Connection Pipes & Wall Flange

Click Clack Waste 32Mm Size Full Thread With 130Mm Height

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including • Kitchen sink without drain board: 610x510 mm bowl depth 200 mm

Sink Cock With Extended Swinging Spout (Wall Mounted Model) With Wall Flange

urinal (Back inlet) with fixing accessories, Size:- 340 x 325 x 650 mm

Concealed Installation Box For Urinal Sensor Consisting Of Solenoid Valve With Control Valve (But Without Exposed Part Kit)

Exposed Part Kit Of Urinal Sensor Consisting Of Wall Flange With Sensor Eye & (4 X 1.5V Aa) Batteries (Compatible With Snr-51085C)

Angular Stop Cock With Wall Flange

Towel Ring Round With Round Flange

Toilet Roll Holder With Stainless Steel Flap

Single Towel Rail 600Mm Long Stainless Steel

Soap Dish Holder

Flash Touch-Free Infrared Hand Dryer With 1150W Rated Power & Carbon Brush Motor

II SECTION - II - SOIL, WASTE & VENT Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipes: a) 32 mm dia

b) 40mm dia.

Flexible pipe a) 32 mm

b) 40mm dia.

Providing and fixing soil, waste and vent pipes: 75 mm dia. Sand cast iron S&S pipe as per IS: 1729

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. •100 mm inlet and 100 mm outlet, sand cast iron S&S as per IS: 3989

III SECTION - III - INTERNAL & EXTERNAL WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the walls etc. a) 15 mm nominal dia pipes

b) 20 mm nominal dia pipes

c) 25 mm nominal dia pipes

d) 32 mm nominal dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge for External Work a) 15 mm nominal dia pipes

b) 20 mm nominal dia pipes

c) 25 mm nominal dia pipes

d) 32 mm nominal dia pipes

e) 40 mm nominal dia pipes

f) 50 mm nominal dia pipes

g) 65 mm nominal dia pipes

Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete : a) 15 mm nominal bore

b) 20 mm nominal bore

c) 25 mm nominal bore

Butterfly valve (Manual) with CI body SS disc, Nitrite Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified a) 50 mm dia

b) 65 mm dia

c) 80 mm dia

d) 100 mm dia

Providing and fixing gun metal non-return valve of approved quality (screwed end) : a) 25 mm nominal bore

b) 32 mm nominal bore

c) 40 mm nominal bore

d) 50 mm nominal bore

e) 65 mm nominal bore

f) 80 mm nominal bore

IV SECTION - IV - RAIN WATER PIPE Providing and fixing on wall face unplasticized Rgid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes a) 75 mm diameter

b) 110 mm diameter

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams

Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand) stone ware spout

Providing and fixing 15cm wide, 45cm overall semi circular plain G.S. sheet gutter with iron brackets 40 x 3 mm size, bolts, nuts, and washers etc., including making necessary connections with rain water pipes complete. •0.63mm thick with zinc coating not less than 75 gm/m2

V SECTION - V - EXTERNAL DRAINAGE Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with RCC top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), inside plastering 12 m thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : •Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) with Sewer bricks conforming to IS : 4885

Providing & fixing Wilo make Pressure Booster Pump HP-1.5 Phase-1, size - 40 x 32 mm Model - HMHIL 903EM 100, Each pump flow 150 LPM @25 meter head with Hydro pressure tank of 100 Ltr/10 bar, 50 NB RB check valve (bypass), auto controller unit (1 phase), UPVC pipe & fittings including installation and transportation charges

II 'ELECTRIFICATION (WITH FITTINGS & FIXTURES), CCTV A PANEL Supply Installation, testing and commissioning of following Panels. Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessary structural supports in form of structural steel sections. Panels shall be floor mounted. The panel shall be compartmental type with suitable size of bus bar and separate cable and busbar chambers. The cable chambers shall be free from any live open connections. Multifunction meters for all incoming feeders, Indication lamps for all incoming and outgoing feeders for phase identifications and for indication of Switch status. FORM OF PANEL : AS PER DESIGN 14 SWG CRCA ALUMINIUM BUS ::CURRENT DENSITY :- 0.8 AMP/1 SQ. MM ALL CABLES - TOP & BOTTM CABLE ENTRIES AS PER CALCULATION FAULT CURRENT :- 25 KA All panels Switchgear will be provided with lockout tagout (LOTO)arrangement. INDICATIONS:FOR ALL INCOMERS PHASE INDICATION WITH SWITCH POSITION. FOR ALL OUTGOINGS FOR SWITCH ON & OFF INDICATION PROTECTIONS: SINGLE PHASING PREVENTER ON INCOMING BUS FOR PHASE IN BALANCE AND SINGLE PHASE PREVENTIONS SURGE PROTECTION DEVICES CT'S: TAP WOUND CT'S FOR METERING METERING MULTIFUNCTION METER WITH RS 485 PORT MAIN DISTRIBUTION PANEL PANEL MAIN INCOMER::200 A TP MCCB FOR MAIN INCOMER:3 POLE MCCB LSI PROTECTION WITH MICROPROCESSOR BASED RELEASE WITH ADJUSTABLE OVERLOAD & SHORT CKT PROTECTION

OUTGOINGS 63 A TP MCCB FOR HVAC LOADS 3 POLE MCCB LSI PROTECTION WITH THERMAL MANGETIC BASED RELEASE WITH OVERLOAD & SHORT CKT PROTECTION 63 A TP MCCB FOR SPLIT AC LOADS ( INSIDE CABIN) 3 POLE MCCB LSI PROTECTION WITH THERMAL MANGETIC BASED RELEASE WITH OVERLOAD & SHORT CKT PROTECTION 40 A TP MCCB FOR 25 KVA UPS 3 POLE MCCB LSI PROTECTION WITH THERMAL MANGETIC BASED RELEASE WITH OVERLOAD & SHORT CKT PROTECTION 25 A TP MCB FOR RAW POWER LOADS 3 POLE C CURVE, 10 KA MCB 25 A TP MCB FOR LIGHTING LOADS 3 POLE C CURVE, 10 KA MCB 32 A TP MCB FOR LIFT PROVISION 3 POLE C CURVE, 10 KA MCB 16 A TP MCB FOR SPARE 3 POLE C CURVE, 10 KA MCB 63 A TP MCCB FOR SPARE 3 POLE MCCB LSI PROTECTION WITH THERMAL MANGETIC BASED RELEASE WITH OVERLOAD & SHORT CKT PROTECTION 32 A TP MCB FOR SPARE 3 POLE C CURVE, 10 KA MCB 16 A TP MCB FOR SPARE 3 POLE C CURVE, 10 KA MCB

B DISTRIBUTION BOARDS Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) SINGLE POLE

b) THREE POLE

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 25 amps

b) 40 amps

c) 63 amps

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 2 + 4 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 6 way (4 + 18), Single door

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415 volts "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 amps

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 amps

C MAINS & SUBMAINS CABLING Supply of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade, 3½ core 95 sq. mm. aluminium conductor

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Above 35 sq. mm and up to 95 sq. Mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3 X 95 sq. mm (38mm)

Supply of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade, 3½ core 25 sq. mm. aluminium conductor

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Up to 35 sq. Mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3 X 25 sq. mm (25mm)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Up to 35 sq. Mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 4 X 10 sq. mm (25mm)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Up to 35 sq. Mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 4 X 10 sq. mm (25mm)

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. b) 25 mm

D POINT WIRING Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. a) Group A

b) Group B

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) TV antenna socket outlet

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. a) 1 or 2 Module (75mmX75mm)

b) 3 Module (100mmX75mm)

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

E LIGHT FITTINGS Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT up to 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty.

Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT up to 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED Strip light Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT up to 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, Max. Energy Consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF

Supply, Installation ,Testing & Commissioning of SPOT LIGHT 6 W 36DEG NW LUMEN OUTPUT OF LED FITTING - 486 LUMEN, COLOR TEMPERATURE , IP RATING Of, LIGHT FITTING - IP 65 AND ABOVE, IK RATING- IK 08 AND ABOVE, SURGE PROTECTION 2 KV AND ABOVE , POWER FACTOR > 0.95, TOTAL HARMONIC DISTORTION (THD) < 10%, COLOUR RENDERING INDEX (CRI) > 80

Supplying and erecting integrated LED street light fitting 26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminium housing , having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT up to 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FGODF/SL

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Supply & fixing of recessed linear light: 30W 4ft, Long life Linear recessed luminaire with white powder coated finish extruded aluminium housing having 55mm cutout width. Special translucent satin finish colour LED PMMA Diffuser. Internal LED driver duly wired up to terminal block for easy installation. Luminous efficacy not less than 110lm/W. CRI>80, IP20, Ambient temp -10°C to +40°C, Driver efficiency>88%, THD<10%, CCT- 4000K, 50,000 hrs @ L70 life, Power factor>0.95, Surge protection-4 KV. Driver is constant current type. Equivalent to Legero make Strapline 50 recessed

Supplying and erecting LED square / circular Max. 25 W down lighter / Panel Light(200 X 200) having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT up to 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED

Supplying and erecting LED square / circular Max. 25 W down lighter / Panel Light(300 X 300) having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT up to 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface up to 20W as per specification No. FG-IDF/LED.

Supply, Installation ,Testing & Commissioning of Passive Infrared (PIR) technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load up to 10 Amp, for mounting height up to 2.8 mtr and for 5 mtr diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. LUMEN OUTPUT OF LED FITTING - 486 LUMEN, COLOR TEMPERATURE , IP RATING Of, LIGHT FITTING - IP 65 AND ABOVE, IK RATING- IK 08 AND ABOVE, SURGE PROTECTION 2 KV AND ABOVE , POWER FACTO

F EARTHING Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

G CABLE TRAY & RACEWAY Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 150 mm width X 50 mm depth X 1.6 mm thickness

b) 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 150 mm width X 50 mm depth X 1.6 mm thickness

b) 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S. cable trays reducers with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 150 mm width X 50 mm depth X 1.6 mm thickness

b) 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S. cable trays Tee's with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 150 mm width X 50 mm depth X 1.6 mm thickness

b) 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S. cable trays cross members with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 150 mm width X 50 mm depth X 1.6 mm thickness

b) 300 mm width X 50 mm depth X 1.6 mm thickness

Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.

Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 300 mm width & 20 mm height complete with necessary hardware.

Supply & laying of AL. extruded raceways of various sizes as detailed below including Cutting / chasing of floor and remaking of floor with proper finishing for Power & Data cables for work stations. a) 50 X 38 mm

Supply, installation, testing and commissioning of G.I. readymade type -JUNCTION BOX - 2 MM THICK a) 75 x75 x 65 mm

b) 150 x 150 x 65 mm

c) 225 x 225 x 65 mm

e) 400x400x65mm

H PUBLIC ADDRESS SYSTEM Speaker cable of following pairs, cores and size of PVC Insulated FRLS copper conductor cable with LHC in the existing surface or recessed steel conduit or PVC Casing and caping including connection etc. Cost of 2 Pair 2 core 48/0.2 mm for PA System (Wastage 5%)

Cost of Digital Audio Amplifier 75 Watt 25 VRMS operating of 240 Volt AC Supply

Cost of 1.5/3/6 W Ceiling Speaker

Cost of 1.5/3/6 W Metal Ceiling Speaker

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm

I TELEPHONE & DATA Supplying, erecting & terminating 10 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete.

Supplying, erecting & terminating 15 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete.

Supplying and drawing of UTP 4 Pair, CAT 6 LAN Cable in the existing surface or recessed steel or PVC conduit as required a) 1 Run of cable

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm

RJ 45 I/O Quad Shuttered socket (for data and telephone) with face plate & Modular box at one place. Make- AMP/SCHNEIDER/DLINK

Supplying, Laying, Labelling & Testing of UTP Category 6 patch cords 1 Mtrs, TIA / EIA 568-8.2 ,with LSOH - Low Smoke Zero Halogen Free. and 1000 mating cycles, RJ 45 plug should be of Polycarbonate FCC part 68 subpart F, UL 94V-0 Make: CommScope/Panduit-Pannet/Legrand( Make: Commscope - Net connect - 1 Mtr patch cord with labelling and installation charges)

Supplying, Installation, cabling, and labelling of 19”, 24 U Wall Mounted Network Rack – with cutouts for cable entry. Color: Black/Gray 1) Front perforated single door- 1No's 2) 230V AC fan Assy Fully Wired - 1 set 3) 1U PVC Horizontal Cable Manager – 6 No's 4) PDU, 5/15A, Socket Strip with 6 Sockets with indicators with 3 mtr power chord with 16A plug –1 No's 6) With Required fitting accessories including Lock and Key. MAKE : APW President/RITTAL/VALRACK/HP/D-Link (Make D-Link - 600 x 600 24U rack )

Supplying, Installation, Termination, Testing, Commissioning and Labelling of 48-port Patch Panel, UTP Category 6,TIA / EIA 568-6.2, with min1000 mating cycles, Metal rear cable manager to properly guide cables to point of termination and come with Velcro straps for tying the cables, Modular connector Fully Mounted should be FCC part68, Subpart F and IEC-60603-7 allows for 568 A/B wiring configuration and IDC body & cover material Fire - Retardant Make: CommScope/Panduit-Pannet/Legrand/D Link( Make: Commscope - Netconnect - Loaded Jack panel )

Supplying, Installation, Splicing of pigtail & Testing of 12 Port. LIU single mode with Fully Loaded LC Couplers and plates ,Sliding Model, Rack mountable, mounting kit, with Single mode LC PIG Tails of 1 Mtrs Make: CommScope/Panduit-Pannet/Legrand/D-Link ( Make: Commscope - Netconnect - Fully loaded LIU)

J CCTV Supplying & erecting of High definition 2 Megapixel IP IR Dome Camera with following features Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 1920 x 1080 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 30m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 30m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant.Built in micro SD/SDHC/SDXC card slot of minimum 128 GB,Built in microphone.minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out× 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,white balance.Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection.

Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any Indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no. CCTV-CAM. MAKE : MATRIX/ HONEYWELL

Supplying and drawing of UTP 4 Pair, CAT 6 LAN Cable in the existing surface or recessed steel or PVC conduit as required a) 1 Run of cable

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm

K ACCESS CONTROL SYSTEM Supply , Installation, Testing and Commissioning of two Reader , 1 Door Controller , POE, With Onboard TCP/IP , 4 Supervisor Input for door open Too Long or Forced Entry , Multi Site Support.( So That card Can be used at multi Facilitates) one door controller with dynamic memory assignment to register up to 20,000 ID nos. and up to 29,500 transactions buffer, network communication , 3 LED indications to inform operating status at real time with necessary accessories and enclosure, power supply and battery back up

Supply , Installation, Testing and Commissioning of MIFARE RFID CARD READER

Supply , Installation, Testing and Commissioning of ELECTROMAGNETIC LOCK suitable for all type of doors (single , double ,wooden, steel, glass with frames & including frame less glass doors) with external Door Magnetic Contacts Electromagnetic locks (not latch) with a holding capacity of 2.5 tonnes at 0.5 amp. Current .

Supply , Installation, Testing and Commissioning of DOOR POSITION SENSOR

Supply , Installation, Testing and Commissioning of DATA CONVERTOR WITH ACCESS MANAGEMENT SOFTWARE

Supply of MIFAIR CARD

Supply , Installation, Testing and Commissioning of Power Supply For the System 12 X 4 Amp.

Supply and laying of 4 c 1.5 sqmm Shielded With Distinguished Colour Coding For each core Shielded Flexible Black Color

Supplying and drawing of UTP 4 Pair, CAT 6 LAN Cable in the existing surface or recessed steel or PVC conduit as required a) 1 Run of cable

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm

III ''FIRE ALARM & SPRINKLER SYSTEM SEC I FIRE SPRINKLER SYSTEM Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required a) 25mm dia.

c) 40mm dia.

d) 50mm dia.

e) 65mm dia.

f) 80mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duty ISI marked complete with buts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required a) 40mm dia.

d) 80mm dia

Providing, fixing, testing & commissioning of 15mm dia, Pendent Sprinkler with quartzoid bulb of rating 68 degree centigrade with required accessories

Providing, fixing, testing & commissioning of 15mm dia, Horizontal Side Wall Sprinkler with quartzoid bulb of rating 68 degree centigrade with required accessories

Providing, fixing, testing & commissioning of 15mm dia, Horizontal Side Wall Sprinkler with quartzoid bulb of rating 79 degree centigrade with required accessories

Supplying, installing, testing and commissioning of 25mm dia Inspection and Testing assembly with sight glass, isolation, by pass valves and connected to drain line complete ( excluding the cost of drain pipe)

Supplying, Installation, testing & commissioning of approved make water flow switches including accessories suitable for up to 150mm dia. pipe as required with potential free contact 2 NO & NC contact. operating at 24-V at MCP (Main Console Panel). The flow switch will be UL approved

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required b) 1000mm

SEC-II FIRE EXTINGUISHERS Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supplying, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. as required

Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button eyc. As required

Supplying, installation, testing & commissioning fire alarm sounder facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Suppling, installation, testing & commissioning of addressable fire control module complete as required

Supplying, installation, testing & commissioning of fault isolator complete with base as required

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 60/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

VRF-02 - 16 HP

VRF Commissioning Charges

Supply & Installation of Refrigerant

INDOOR UNITS Cassette Type Indoor Unit Supply, Installation, Testing & Commissioning of cassette type indoor unit of below mentioned capacities. Indoor unit will be having integral drain pump along with cordless remote controller. Cassete unit shall have fresh air port for fresh air purging inside the room. a) 2.0 TR Cassette Unit

b) 1.5 TR Cassette Unit

Special Refrigerant joints Refnut/"Y" Joints

REMOTE CONTROLLER FOR VRV Supply, Installation, testing & commissioning of Remote Controller (CRC) a) RC-01

Supply & Installation of 2 TR Cassette AC, 5 Star Rated with Inverter Type with Nitrogen Leak Testing Vacuuming & Refrigerant charging

Removal & Re-Installation of Old 2 TR Cassette Ac

Supply of soft Copper Tube (Liquid Line)Cooper Tube shall be seamless with (Nitrile rubber, class-O factory fabricated GC Cloth 19 mm thick, self extinguishing

Supply of soft Copper Tube (Suction Line) Cooper Tube shall be seamless with (Nitrile rubber, class-O factory fabricated GC Cloth 19 mm thick, self extinguishing

g) 15.8 mm Dia

h) 12.7 mm Dia

i) 9.5 mm Dia

j) 6.3 mm Dia

DRAIN PIPING UPVC Drain piping with drain trap & insulated with 13mm thick make Nitrile Rubber Sleeve insulation with necessary tees, elbows and fittings. All drain piping shall be firmly supported by MS painted angles from ceiling. For Outdoor Application Elastomeric Sheet shall be with aluminium foil with adhesive. Note: All openings/cutout for refrigerant piping shall be sealed with Fire Retardant Sealant and need to be included in Costing. a) 25mm Dia

b) 32mm Dia

c) 40mm Dia

ELECTRICALS PANEL ELCB + MCB for Local isolation of VRV Outdoor unit with all other electrical accessories. a) VRV -01

Cabling a Power Cabling Supply, Installation, testing and commissioning of Cable end termination with Double / single compression Brass Nickel Pleated cable gland with all necessary hard wears like cu / Al lugs & PVC hood, ferrules etc. of following copper/alum. conductor armoured / unarmoured cables including supply of all materials, drilling of gland plates and dressing of cables inside panel. All necessary material and hardware for termination purpose will be provided by the contractor. All Labour complete as per the specification of this tender and direction of engineer in charge. 1.1 KV, XLPE insulated copper/aluminium conductor armoured / unarmoured, FRLS (Outer sheathed) power cables of following sizes using Double Compression Gland 4C X 10 sq.mm Copper XLPE

b Control Cabling Supply, installation & commissioning of following sizes armoured ,multistranded, screened copper cable for Signal. Cable shall enclosed in FRA less PVC conduit pipe with proper conduit support. 2 C X 1.5 SQ.MM. Copper Cable

6 Sq MM Flexible Earthing Cable

MS Stand/ Threaded Rod Supports with Anchor Fastener for Indoor Unit

MS Stand for Outdoor Unit for VRF

Supply & Installation of Cable Tray 150 x 50 x 1.6 mm thick

Supply & Installation of 19 mm class O Nitrile Rubber Insulation for Underdeck Insulation with one side Al foil by using GI Wire mesh, screw etc,

Supply & Installation of Inline Fan for Fresh Air of Capacity 1100 CFM @ 30 mm static pressure with G4 Filters Make: Kruger

Supply & Installation of 120 GSM GI Ducting with accessories

Supply & Installation of DFC with Flexible for fresh Air Ducting

V 'MECHANICAL VENTILATION SYSTEM A GROUND FLOOR MECHANICAL VENTILATION Supply & Installation Ventilation Unit (Exhaust) with 25mm thick PUF Panel with 0.6 mm GI Skin, Centrifugal Plug Fan with IE2 Motor, Air Inlet Damper a) First Floor Exhaust Air Unit 1200CFM@50 mm St Pr

Supply & Installation Ventilation Unit (Supply) with 25mm thick PUF Panel with 0.6 mm GI Skin, Centrifugal Plug Fan with IE2 Motor, + G4 Filters + Air Outlet Damper. b) First Floor Supply Air Unit 1000CFM@50 mm St Pr

Supply & Installation of 24G GI Ducting Make: Jindal or Equivalent

Supply, installation, testing & balancing of Fresh Air Disc Valves for Fresh Air & Exhaust Air as per approved shop drawings for the following sizes. Disc Valve shall have provision to modulate the air quantity coming out of disc valve. Of dia 150 mm

Supply & Installation of 150 mm dial Flexible Duct

Supply and Installation of Electrical Panel with Incoming MCB, Potential Free Contactors

Electrical Cable 1.5 Sqmm Cu Armoured Make Polycab

Cable Tray 50x25 mm without cover

MS Structure for Stand dually Painted for Supply & Exhaust Blower

Supply & Installation of SS/GI Wiremesh-Birdmesh for Supply & Exhaust Blower

B FIRST FLOOR MECHANICAL VENTILATION Supply & Installation Ventilation Unit (Exhaust) with 25mm thick PUF Panel with 0.6 mm GI Skin, Centrifugal Plug Fan with IE2 Motor, Air Inlet Damper a) First Floor Exhaust Air Unit 1500CFM@50 mm St Pr

Supply & Installation Ventilation Unit (Supply) with 25mm thick PUF Panel with 0.6 mm GI Skin, Centrifugal Plug Fan with IE2 Motor, + G4 Filters + Air Outlet Damper a) First Floor Supply Air Unit 1200CFM@50 mm St Pr

Supply & Installation of 24G GI Ducting Make: Jindal or Equivalent

Supply, Installation, Testing, Adjusting & balancing of Fresh Air Disc Valves for Fresh Air & Exhaust Air as per approved shop drawings for the following sizes. Disc Valve shall have provision to modulate the air quantity coming out of disc valve. Of dia 150 mm

Supply & Installation of 150 mm dial Flexible Duct

Supply and Installation of Electrical Panel with Incoming MCB, Potential Free Contactors

Supply & Installation of Electrical Cable 1.5 Sqmm Cu Armoured Make Polycab

Cable Tray 50x25 mm without cover

Supply & Installation of MS Structure for Stand dually Painted for Supply & Exhaust Blower

Supply & Installation of SS/GI Wiremesh-Birdmesh for Supply & Exhaust Blower

Removal of Existing Ducting Systems and Ventilation Units SAC Code 995643

VI 'DESIGNED / CUSTOM MADE FURNITURE I DESIGNED FURNITURE Note : Furniture Item numbers in interior layout drawing are mentioned in description (in bracket). A WALL & COLUMN PANELING Providing and fixing wall panelling in Ground floor waiting area made out of 19mm, 12 mm thk MR grade commercial plywood, 4mm thick waterproof MDF with Lustre paint finish as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. ( WP1)

Providing and fixing wall panelling in Ground floor waiting area made out of 19mm, 12 mm thk MR grade commercial plywood, 4mm thick Veneer finish as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (WP2)

Providing and fixing wall panelling in CEO cabin First floor made out of 19mm, 12 mm thk MR grade commercial plywood, 1mm thick Laminate finish as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (WP3)

Providing and fixing panelling to columns on First floor office area made out of 19mm, 12 mm thk MR grade commercial plywood, 4mm thick waterproof MDF with Lustre paint finish as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (COP1 & COP2)

Providing and fixing dummy beam box in First floor office area made out of 19mm, 12 mm thk MR grade commercial plywood, 4mm thick waterproof MDF with Lustre paint finish as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (DB1)

B FULL HEIGHT PARTITION Providing & Fixing 1.2 x 2.12mt Height partition in CEO cabin made in 12 mm thk. clear toughened glass with glass film & fixed with necessary fixing hardware & BTC beading in 68 mm thk dead Partition with 50x50mm thk ply frame & 8mm commercial ply on both sides finished with 1mm thk laminate to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (GP1)

Providing & Fixing 2.00 x 2.15mt Height partition in Ground floor waiting area made in 12 mm thk. clear toughened glass with glass film & fixed with necessary fixing hardware & BTC beading in 68 mm thk dead Partition with 50x50mm thk ply frame & 8mm commercial ply on both sides finished with 1mm thk laminate to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP0)

Providing & Fixing Full Height Partly glazed and Partly solid Partition for Pantry in 50x50mm thk ply frame work (@ 600mm c/c) with 8mm commercial ply on both sides finished with 1mm thk laminate to all exposed surface. 8 mm thk toughened clear glass fixed with BTC beading, cutting of holes to partition, provision for electrical conduits, item complete. Provided with 32mm thk door fixed with necessary fixing hardware of approved make as per design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP1)

Providing & Fixing Full Height 68 mm thk, Partly glazed and Partly solid Partition for Pantry in 50x50mm thk ply frame work (@ 600 -900mm c/c) with 8mm commercial ply on both sides finished with 1mm thk laminate to all exposed surface. 10mm thk toughened clear glass fixed with BTC beading as per design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. ( FP2)

Providing & Fixing full Height partition for Multipurpose room made in partly solid ply partition & partly 12 mm thk. clear toughened glass with glass film as per design. Glass is fixed in SS Glazing profile at top & bottom. Solid Partition is with 50x50mm thk ply frame @ 600 -900mm c/c & 8mm commercial ply on both sides finished with 1mm thk laminate to all exposed surfaces & Duco paint to display areas as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP3)

Providing & Fixing full Height partition for Multipurpose room made in partly solid dead ply partition & partly 12 mm thk. clear toughened glass with glass film & with toughened glass doors including all necessary fixing hardware. Glass is fixed in SS Glazing profile at top & bottom. Solid Partition is with 50x50mm thk ply frame @ 600 -900mm c/c & 8mm commercial ply on both sides finished with 1mm thk laminate to all exposed surfaces as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP4)

Providing and fixing full height acoustical solid partition for CEO cabin with 50x50mm thk ply frame at 600 - 900 c/c distance, 50 mm thk rockwool in between fixed with chicken mesh & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint to all exposed surfaces as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP5)

Providing and fixing full height partly glazed & partly solid acoustical solid partition for CEO cabin with 50x50mm thk ply frame at 600 - 900mm c/c distance, 50 mm thk rockwool in between fixed with chicken mesh & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint to all exposed surfaces. 12 mm thk toughened clear sandwiched glass with air gap in between for glass partition, with toughened glass door including all necessary fixing hardware & finished with glass film as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP6)

Providing and fixing full height acoustical solid partition for CEO cabin in 50x50mm thk ply frame at 600 - 900 c/c distance, 50 mm thk rockwool in between fixed with chicken mesh & 8mm thk commercial ply with 4 mm thk waterproof MDF on one side finished with Lustre paint & 8mm thk commercial ply with 4 mm thk Veneer other side with transparent PU coat finish to exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP7)

Providing and fixing full height solid partition for meeting room in 50x50mm thk ply frame at 600 - 900 c/c distance & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP8)

Providing and fixing full height partly solid & partly glazed partition for meeting room made in 12 mm thk. clear toughened glass with glass film as per design. Glass is fixed in SS Glazing profile at top & bottom as per drawing & design. The solid partition is in 50x50mm thk ply frame at 600 - 900mm c/c distance & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. ( FP9)

Providing and fixing full height partly solid & partly glazed partition for meeting room in 12 mm thk toughened clear glass & 12 mm thk toughened glass door with glass film including all necessary fixing hardware & finished with glass film as per drawing & design. The solid partition is in 50x50mm thk ply frame @ 600 - 900mm c/c & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP10)

Providing and fixing full height partly solid & partly glazed partition for HOD1 & meeting room in 12 mm thk toughened clear glass including all necessary hardware & finished with glass film as per drawing & design. The solid partition is in 50x50mm thk ply frame at 600 - 900mm c/c distance & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP11)

Providing and fixing full height partly solid & partly glazed partition for HOD cabins in 12 mm thk toughened clear glass including all necessary hardware & finished with glass film as per drawing & design. The solid partition is in 50x50mm thk ply frame at 600 -900 c/c distance & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP12) Total -3 Numbers

Providing and fixing full height partly solid & partly glazed partition for HOD cabins in 12 mm thk toughened clear glass including all necessary fixing hardware & finished with glass film as per drawing & design. The solid partition is in 50x50mm thk ply frame at 600 -900mm c/c distance & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP12a)

Providing and fixing full height partly solid & partly glazed partition for meeting room in 12 mm thk toughened clear glass & 12 mm thk toughened glass door with glass film including all necessary hardware & finished with glass film as per drawing & design. The solid partition is in 50x50mm thk ply frame at 600 -900mm c/c & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP13)

Providing and fixing full height partly solid & partly glazed partition for meeting room in 12 mm thk toughened clear glass & 12 mm thk toughened glass door with glass film including all necessary hardware & finished with glass film as per drawing & design. The solid partition is in 50x50mm thk ply frame at 600 -900mm c/c & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP14)

Providing and fixing full height partly solid & partly glazed partition for meeting room in 12 mm thk toughened clear glass & 12 mm thk toughened glass door with glass film including all necessary hardware & finished with glass film as per drawing & design. The solid partition is in 50x50mm thk ply frame & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP15)

Providing and fixing full height partly solid & partly glazed partition for meeting room in 12 mm thk toughened clear glass & 12 mm thk toughened glass door with glass film including all necessary hardware & finished with glass film as per drawing & design. The solid partition is in 50x50mm thk ply frame & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. ( FP16 )

Providing and fixing solid partition at toilet block entrance made in 12 mm thk. clear toughened glass with glass film as per design. Glass is fixed in SS Glazing profile at top & bottom as per drawing & design. The solid partition is in 50x50mm thk ply frame at 600 -900mm c/c distance & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. ( FP17 )

Providing and fixing partly solid & partly glazed partition at toilet block entrance made in 12 mm thk. clear toughened glass with glass film as per design. Glass is fixed in SS Glazing profile at top & bottom as per drawing & design. The solid partition is in 50x50mm thk ply frame at 600 -900mm c/c distance & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (FP18)

C LOW HEIGHT PARTITION Providing and fixing full height partly solid & partly glazed partition at CEO waiting lobby made in 12 mm thk. clear toughened glass finished with glass film & 75x40 mm thk country teak vertical fins finished with Duco paint including all necessary fixing hardware as per drawing & design. The top solid partition is in 50x50mm thk ply frame at 600 -900mm c/c distance & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. ( LP1 )

Providing and fixing full height partly solid & partly glazed partition at CEO waiting lobby made in 12 mm thk. clear toughened glass finished with glass film including all necessary fixing hardware as per drawing & design. The solid partition is in 50x50mm thk ply frame at 600 -900mm c/c distance & 8mm thk commercial ply with 4 mm thk waterproof MDF on both sides finished with DUCO & Lustre paint finish to all exposed surface as per drawing & design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (LP2)

F SIDE STORAGE UNITS Providing and fixing side unit of size 1200 x 450mm, & 7500mm high for CEO Cabin made with 18mm thick post forming ply top with 30mm (18+12mm) thick edge rounding facia finished with Veneer-V2 with transparent PU paint. The side unit has drawer in 12mm thick ply for sides, back & bottom and vertical partition in between unit with shutter of 18mm thick ply with Veneer finish with transparent PU paint as per design. The drawers to be provided with telescopic channels. The table to be made as per drawing. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (SU0)

Providing and fixing side unit of size 3100 x 450mm & 7500mm high for CEO Cabin made with 18mm thick post forming ply top with 30mm (18+12mm) thick edge rounding facia finished with Veneer-V2 with transparent PU paint. The side unit has drawer in 12mm thick ply for sides, back & bottom and vertical partition in between unit with shutter of 18mm thick ply with Veneer finish with transparent PU paint as per design. The drawers to be provided with telescopic channels. The table to be made as per drawing. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (SU1)

Providing and fixing side unit of size 1200 x 450mm & 7500mm high for HOD Cabins & All Department Managers made with 18mm thick post forming ply top with 30mm (18+12mm) thick edge rounding facia finished with 1mm thick post forming laminate L2 (D). The side unit has drawer in 12mm thick ply for sides, back & bottom and vertical partition in between unit with shutter of 18mm thick ply with 1mm thick laminate finish as per design. The drawers to be provided with telescopic channels. Internal surfaces to be finished with 0.8 mm laminate. The table to be made as per drawing. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (SU2, SU2a)

G LOW HEIGHT STORAGE UNITS Providing & Fixing low height storage unit in Finance Department of size 1200 x 450 mm deep x 750 mm heigh as per design and layout made out of 18 mm thick post forming ply on top & sides with 30mm (18+12mm) thick fascia finished with 1mm thick post forming laminate. Storage unit has vertical support & partition in between with shelves and shutters in 18mm thick ply with 1mm thick laminate finish as per design. Internal surfaces to be finished with 0.8 mm laminate, The furniture to be made as per drawing. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (LST1)

Providing & Fixing low height storage unit in Reception of size 1500 x 520 mm deep x 750 mm heigh as per design and layout made out of 18 mm thick post forming ply on top & sides with 30mm (18+12mm) thick fascia finished with 1mm thick post forming laminate. Storage unit has vertical support & partition in between with shelves and shutters in 18mm thick ply with 1mm thick laminate finish as per design. Internal surfaces to be finished with 0.8 mm laminate, The furniture to be made as per drawing. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (LST2) 0.91 x 0.51 x 0.75

Providing & Fixing low height storage unit in Reception & Multipurpose Room of size 1500 x 450 mm deep x 750 mm heigh as per design and layout made out of 18 mm thick post forming ply on top & sides with 30mm (18+12mm) thick fascia finished with 1mm thick post forming laminate with 10mm thick toughened glass on top of the top ply. Storage unit has vertical support & partition in between with shelves and shutters in 18mm thick ply with 1mm thick laminate finish as per design. Internal surfaces to be finished with 0.8 mm laminate, The furniture to be made as per drawing. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (LST3) 1.50 x 0.45 x 0.75

Providing & Fixing low height storage unit in Finance Department of size 1650 x 450 mm deep x 750 mm heigh as per design and layout made out of 18 mm thick post forming ply on top & sides with 30mm (18+12mm) thick fascia finished with 1mm thick post forming laminate. Storage unit has vertical support & partition in between with shelves and shutters in 18mm thick ply with 1mm thick laminate finish as per design. Internal surfaces to be finished with 0.8 mm laminate, The furniture to be made as per drawing. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (LST4, LST4a) 1.65 x 0.45 x 0.75

Providing & Fixing low height storage unit in Multi Purpose Room of size 3000 x 450 mm deep x 750 mm heigh as per design and layout made out of 18 mm thick post forming ply on top & sides with 30mm (18+12mm) thick fascia finished with 1mm thick post forming laminate with 10mm thick toughened glass on top of the top ply. Storage unit has vertical support & partition in between with shelves and shutters in 18mm thick ply with 1mm thick laminate finish as per design. Internal surfaces to be finished with 0.8 mm laminate, The furniture to be made as per drawing. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (LST5) 3.00 x 0.45 x 0.75

Providing & Fixing low height storage unit in CEO Cabin of size 3200 x 450 mm deep x 750 mm heigh as per design and layout made out of 18 mm thick post forming ply on top & sides with 30mm (18+12mm) thick edge rounding fascia finished with Veneer-V2 with transparent PU paint. Providing 10mm thick toughened glass over the top of the top ply. Storage unit has vertical support & partition in between with shelves and shutters in 18mm thick ply with Veneer finished with PU paint. The furniture to be made as per drawing. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (LST6) 3.20 x 0.45 x 0.76

Providing & Fixing Vanity Cabinet in CEO Cabin of size 1200 x 450 mm deep x 350 mm heigh as per design and layout made out of 18 mm thick post forming ply all around with 30mm (18+12mm) thick finished with Veneer with transparent PU paint. Cabinet has drawers in 18mm thick ply with veneer finished with PU paint. The drawers to be provided with telescopic channels. The furniture to be made as per drawing. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. (VC1)

H FULL HEIGHT STORAGE UNITS FST1 = 1.8x0.45x1.35

FST2 = 4.1x0.45x1.35

FST3 & FST3a = 1.73x0.45x1.35

FST4 = 2.25x0.45x1.35

FST5 & FST5a = 1.65x0.45x1.35

FST6 = 1.8x0.45x1.35

FST7 & FST7a = 2.4x0.45x1.20

FST8 = 1.0x0.45x1.35

I Glass Hardware & Accessories for office Entrance Door Providing & fixing top pivot patch, bottom hydraulic floor spring, bottom patch lock & 'H' handle 450mm to two leaf toughened glass door with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc. a) Floor spring - single crock SS finish - 75 kg wt door -0.85 mt wide -Combo set - top, bottom, Flr spring - Enox- FHHS 3070 SS

Bottom Lock Enox - ELITE EPF 706

H' handle -300mm x 25mm- Enox ESDH 1115

I MISCELLANEOUS WORK SIGNAGE Providing & fixing signages at respective areas in vinyl material (5mm thk) as per design. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc.

CEMENT BOARD CLADDING IN RESPECTIVE AREAS Providing and fixing Cement Board cladding to existing porch columns & to fabricated members of bridge as required. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc.

Providing & Fixing storage unit in PANTRY as per design and layout. Storage unit has vertical support & partition in between with shelves and shutters in 18mm thick ply with 1mm thick laminate finish as per design. Internal surfaces to be finished with 0.8 mm laminate, The furniture to be made as per drawing. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc.

GUARD SHEET FOR FLOORING Providing and laying bubble / guard sheets on ground floor existing flooring for protection during execution of work. The material to be used as mentioned in the list of approved make complete with necessary hardware as per drawing, site conditions, approved samples, instructions from engineer Incharge / Architect etc.

VII 'GREEN FACADE ON REAR PARAPET WALL Supply & Installation of ELT OmniGreen Biowall or any equivalent system Supply & Installation of sustainably designed modular MULTI CAVITY MODULES with 6 attached planting cavities of 5" x 4" x 6.5" / 6" X 5"x 6" each with in built water reservoir, filled with longevity enabled, structurally engineered growth media & planted & pre grown fully developed plants, suitable for the site conditions & 3 fold BACK SUPPORT MEMBER with tongue & groove joinery to securely hold the module.

Drip irrigation automated system with controller with dripper, controller

Supply & Fixing of Hot Dip Galvanised MS Support Members for Fabricated support Providing & fixing Hot Dip Galvanised MS Vertical member 50 x 50x 2 mm thk or as per the structural consultants suggestions. With Drain tray

Supply & Fixing of MS Support Members for Fabricated support structure for green wall, walking plantform for access & maintenance & Ladder to access it from ground Providing & fixing Hot Dip Galvanised MS Vertical member 50 x 50x 3mm thk for working platform & for Vertical members, with related hardware. Note: This structure will be fixed 4FT away from the wall by extended support. 200X200X8mm MS plates are considered for the fixing of structure on wall. This structure also includes Ladder to access the green wall for maintenance & Provision to engage the ladder while maintenance also will be using Chemical Fasteners to reduce the chances of external leakages. Chequered plate will be provided for the walking platform

Madane Design Workshop LLp (BID ID -415021)

STUDIO ASA (BID ID -415020)