SPL REPAIR OF BOUNDARY WALL NEAR CP-6(A) AND CERTAIN OTHER SANCTIONED WORKS UNDER AGE B/R I AT NAMS.

Amount

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil complete all as specified and directed.

M&L for earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil in any kind of soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed.

All as per item 03 here in before but exc 1.5 mtr deep and not exc 3.00 mtr deep complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers under floors or trenches complete all as specified and directed.complete all as spd

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Hard core of (Broken bricks) of guage n.exc 63mm deposited spread and levelled in layer n.exc 15cm thick watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for Plain Cement Concrete type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (40 mm graded aggregate) in foundation filling and mass concrete for bottom of manhole complete all as specified & as directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tiles exceed.06 sqm but not exc.0 .11sqm, in floors etc laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tiles exceed.11 sqm but not exc.0 .18sqm, in floors etc laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.

M&L Glazed ceramic Coloured tiles 450x350/300x7-8 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc.laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed..

M&L for 15 to 17mm thick pe-polished granite stone slab as in partition of urinals, steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in set in 10 mm thick cement mortar (1:4) complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as treads, cooking platform and similar works complete all as spd and directed.

M&L of 50mm plain Cement concrete type C-2, 1:3:6 (20mm graded aggregate) including the top surface finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Dismantiling of brick works in cement mortar incuding all quoins/arches pillers complete all as specified and directed.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

All as per item 18 here in before but except bricks

M&L for 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) including water proofing treatment @3% by weight of cement complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM 1:4 on fair faces of brick work and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed incl WPC 3% by weight of cement Note-WPC will be paid separately.

Material and labour for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed.

Material and labour for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc Complete all as specified.

M&L for preparing newly plastered surfaces of ceilings, soffits & chajja and applying three coats of white wash complete all as spd and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over alkaly resistance primer complete all as specified and as directed.

M&L for applying 1mm thick wall care putty on wall trowelled to even and smooth complete all as spd

M&L for newly plastered wall surfaces and applying two coats of Exterior weather proof Emulsion paint over one coat alkali resistant primer complete all as specified and directed.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 8 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame. complete all as specified and directed.

S & F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.

Supply & fixing 3mm thick sheet glass ordinary quality glazing with oil putty in square n exc 0.5 sqm quality or description from steel frame and all specified.

Supply and fixing mild steel framed work as in grill, guard bars etc with ends of bars/FI shoulders and or riveted or forged in to spikes, framed guard bar and similar works confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as spd

S&F for 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match incl two coat of synthetic enamel paint over a coat of pinc primer on wooden surface complete all as spd and directed by Engr-in-charge.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing

S &F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100mm long cold rolled mild steel medium weight butt hinges welded or screwed to steel, aluminium and wooden chawkhat complete all as specified and directed.

S&F of 75mm Butt hinges, medium weight, cold rolled Stainless steel, and fixed complete all as specified and directed.

S&F Floor door stopper of Aluminium alloy body and at edge with rubber bush of 150 mm long fixed on with necessary steel screw complete all as specified and directed.

S&F of 150mm long Aluminium anodised, barrel tower bolts of extruded section fixed complete all as spd

S&F of 150mm in size extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of red oxide on steel surface including preparation of new steel surface width or girth exc 10cm all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and directed.

S & F viterous china wash hand basin white, flat back of size 550x 400cm incl GI brackes of required length, brass chromium plated waste coupling & 32mm bore PVC waste pipe (corrugated) of appropriate length and making necessary connections complete all as specified and directed

S & F vitreous china ware over counter ovel wash hand basin, any colour, size 570 x 450 mm size including cutting for and pinning ends of brackets or erecting stand including fixing waste pipe , CP waste coupling & bottle trap all as specified and approved by Enger-in-Charge.

S & F Vitreous China Squatting pan 'orissa pattern size 580x440 white with integral foot rests with `P' or `S' trap, front or back inlet including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete complete all as specified and directed

S&F Vitreous China urinals, bowl type (back or corner wall type), half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as spd(minium weight of190gms) complete all as specified and directed

S&F chromium plated waste coupling half or full threaded, suitable for urinals, 32mm dia bore, min wt 45 gms complete all as specified and directed

S&F 15mm bore dia chromium plated Urinal spreader fixed to pipe complete all as specified and directed

S&F 32mm dia PVC waste pipe (corrugated) for wash hand basin complete all as specified and directed

S&F in repair PVC 10 litres, valveless. Syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle and brackets including flush pipe of polyethylene of high density PVC, 32 mm dia for low level cistern complete all as spd

S & F 15 mm bore Galvanized Steel tubes, medium grade, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed

S & F 20 mm bore Galvanized Steel tubes, medium grade, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed

S & F 15 mm bore fancy type long body chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F 15 mm bore chromium plated fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F angle cock fancy type cast copper alloy chromium plated screwed down high pressure with capstan head screwed for iron pipe 15 mm bore complete complete all as specified and directed.

S & F15 mm chromium plated stop valves (concealed) of long body, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F 15 mm chromium plated shower rose 150 mm x150 mm in square size with or without swivel joints, any size, including square tubular shower arms of necessary fixing to steel pipe or union complete all as specified and directed

S& F for chromium plated Towel rail 20 mm dia 60 cm long with side brackets and all as directed.

S&F 500 ltr capacity rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) hoisted and fixed in position incl 20mm bore ball valve PVC high pressure with palythene float and flynut and 20 dia bore gun metal globe or gate valve complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore dia PVC(SWR) bend any radius complete all as specified and directed.

S&F 75 mm bore dia PVC(SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F 75 mm bore dia PVC(SWR) vent cowl complete all as specified and directed.

S&F of 75mm PVC (SWR) Nahani/floor trap, plain with ss grating including jointing with solvent cement complete all as spd

Use and waste formwork to sides of concrete foundation footings base of coloumns sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete all as specified and directed.

Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200mm thick (Horizontal or sloping) and complete all as specified.

Use and waste of form work to edges of concrfete flats, slabs etc incl fair finished surface all as specifed and directed.

M&L for formwork to sides and soffits of floor or roof beam, lintel beams flat surface etc incl supports, overhangs etc complete all as specified.

M&L for formwork to chajjas and similar items, flat surface incl edges complete all as specified.

M&L for reinforced cement concrete M-25 (Design mix) (using 20 mm graded aggregate) as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc all as specified and directed.

M&L for reinforced cement concrete M-25 (Design mix) (using 20 mm graded aggregate) in Columns, pillars, piers, etc complete all as specified.

M&L for reinforced cement concrete M-25 (Design mix) (using 20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for reinforced cement concrete M-25 (Design mix) (using 20 mm graded aggregate) in roof beams, cantilevers, bressummers, lintels over 1.5m span and complete all as specified.

M&L for reinforced cement concrete M-25 (Design mix) (using 20 mm graded aggregate) in Chajjas and the like.

Supply only Integral water proofing compound

M&L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) in cluding 10 mm thick plastering of roof in cement mortar 1:3 with WPC @ 3% by weight of cement content Note: Every each coat gap between 6 hrs) complete all as specified and directed.Make : Asian paint, Sika, Fosroc

M&L MS framed work such as grills, gratings with ends of bars shouldered and or rivated or forged into spikes, framed guard bars and similar work confirming to Fe 410 or Fe 310-0 complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified.

S&F TMT bars 5mm and over and upto 10mm for stirrups cut to length bent to shape spirally for hooping,hooking ends and binding with mild steel wire (annealed) not less than 0.5 mm dia or securing clips etc complete

All as per item 86 here in before but 6 to 8 mm dia and including in stirrups, spacers and binders and complete all as specified.

M&L type B1 1:2:4 (20mm graded aggregate) providing RCC precast cement concrete as in cover slab for man hole and similar article with plain face. Set in cement mortar 1:4 complete all as specified & as directed.

M&L for reinforced concrete pipe Class NP-3, 150mm dia with coller laid jointed with CM 1:3 incl breaking up any types of pipes complete all as specified and directed.

M&L PCC 1:3:6 type C2 as in concrete bed to 150 mm bore drain pipe and over incl packing under haunching against the sides of pipes after pipe laid and tested complete all as specified & as directed.

BISHAN DASS

M/s Vijay Construction Co.

tarlok singh contractor

Jaspal Construction Co.

Santokh Singh and Associates

sandhu builders

M/s MAHAJAN CONSTRUCTION CO.