Loading…
Loading…
Tender Value
₹4.8 Cr
EMD Value
₹9.6 L
Closing Date
3 Sept 2026, 12:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-B of Chapter-7 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet, otherwise the offer is liable for rejection.
(a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of the tender.(b)(1) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b)(3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard GCC or through subcontractor fulfilling the requirements as per clause 7 of the Standard GCC or jointly i.e.,partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s),and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility.Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard GCC, with prior approval of Chief Engineer in writing.(Refer Item 10.1 of Chapter-2 of Annexed Document)
Defination of Similar Work :- Supply, erection/installation, testing & commissioning of Electrical assets pertaining to HT and/or LT & HT power supply systems such as substations (with/without supply of transformers/sub-station equipments), HT panels ,laying of LT and HT cables, laying of HT overhead lines, light poles, high masts including luminaries, earthing of electrical equipments, straight through jointing and end terminations of LT/HT systems etc. and/or Maintenance & operation of Electrical assets pertaining to HT and/or LT & HT power supply systems by providing skilled and unskilled manpower.
63 conditions · 11 needing a document upload
All Optional documents to be submitted before signing of Contract Agreement/or at the time of submission of Bid
List of documents which are to be submitted by the tenderer along with their offer failing which the tender shall be summarily rejected.
If Bid Security is submitted through mode of Bank Guarantee, then submission of scanned copy of the Bank Guarantee towards Bid Security of the bid on e-tendering portal (IREPS) and original of above Bank Guarantee before closing date of submission of bids (i.e. excluding the last date of submission of bids) as per Para-5 of Instructions to Tenderers (ITT) in Chapter- 2 and Para-6, Annexure-I in Chapter-2 of Annexed Document.
Technical Eligibility Criteria as per Para 10.1 & Para 17.15.1 of Chapter-2
Financial Eligibility Criteria as per Para 10.2 & 17.15.2 of Chapter-2 along with Certificate issued from Chartered Accountant.
Bid Capacity as per Para 10.3 & 17.15.3 duly filled up Annexure- G, Chapter-7 of Annexed Document.
Certificate as per the proforma enclosed vide Annexure-A and an additional certificate in case of other than Company/Proprietary firm, Annexure-A-1 shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be as per Annexure-A1 vide Chapter-7 of the Annexed Document.
Power of attorney duly notarized and in favour of a single individual should be submitted. As per Para 14,15, 17 & 18 of SGCC.
List of important documents which are to be submitted by the tenderer along with their offer.
Certificate of familiarization to the work site as per Chapter-6 of the Annexed Document.
Certificates regarding contractual payments received, along with duly filled up Annexure-B, Chapter-7 of Annexed Document, to this effect which may be an attested Certificate from the concerned department/client or Audited Balance Sheet duly certified by the Chartered Accountant duly supported by Audited Balance Sheet.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work as per the format vide Annexure-D, Chapter-7 of Annexed Document.
List of personnel/organization on hand and proposed to be engaged for the tendered work as per the format vide Annexure- E, Chapter-7 of the Annexed Document.
Details of works completed/substantially completed during previous 07 years ending last day of month previous to the one in which tender has been invited as per the format vide Annexure-F, Chapter-7 of the Annexed Document.
All documents reflected as Mandatory in the Commercial Compliance are to be submitted other wise the offer is liable to be rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit the Certificate of familiarization to the work site as per Chapter-6 of the Annexed Document.
Please submit copy of Certificate as per the proforma enclosed vide Annexure-A, Chapter-7 of the Annexed Document. An additional certificate in case of other than Company/Proprietary firm, Annexure-A-1 shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be. Non-submission of the Certificates by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Please submit details of the constitution of Firm i.e. Proprietary Firm/Partnership Fm/HUF/JV/Company Registered under Companies Act-2013/Limited Liability Partnership/Registered Society & Registered Trust etc along with signed Annexure-C, Chapter-7 of the Annexed Document. And also submit the following mandatory supporting documents such as copies of Partnership Deed, Power of Attorney, Memorandum of Articles, Articles of Association, Authorisation, Certificate of Incorporation, Certificate of Registration, Deed of Formation, Memorandum of Understanding, JV Agreement etc as applicable under Para 14, 15, 17 & 18 of Annexure-I, Chapter-2 of Annexed Document. Important Note:-(a)The Power of Attorney duly Notarized shall be submitted even if such specific person is authorized for above purpose through Partnership Deed/Memorandum of Understanding/Article of Association or such other document. (b) In case one or more of the members of JV is/are partnership firm(s)/ Proprietary Firm/ HUF/ Companies/ LLP Firm(s)/ Society(s)/ Trust(s), the required documents of each individual member of JV shall be submitted along with the documents to be submitted on behalf of the JV. (c) Non-submission of above documents (except PAN Card & Undertaking regarding not blacklisted/debarred from participation of tenders/contracts) or submission of incomplete documents shall lead to summarily rejection of the offer.
Please submit copy of the PAN Card.
Please submit list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work as per the format vide Annexure-D, Chapter-7 of Annexed Document. Non-compliance with this condition liable to result in the tender being rejected.
Please submit list of personnel/organization on hand and proposed to be engaged for the tendered work as per the format vide Annexure-E, Chapter-7 of the Annexed Document. Non- compliance with this condition liable to result in the tender being rejected.
Please submit details of works successfully completed or substantially completed during last 07 years ending last day of month previous to the one in which tender has been invited as per the format vide Annexure-F, Chapter-7 of the Annexed Document. Non-compliance with this condition is liable to result in the tender being rejected.
The tenderer(s) are required to upload the information as per Annexure-G of Chapter-7, Annexed Document duly signed by the tenderer(s) and verified by Chartered Accountant since the information is required to evaluate the bid capacity of the tenderer(s) for tenders valuing more than Rs. 10 Cr. However, the tenderer(s) may submit any additional information, if they desire so. In case, the tenderer(s) failed to submit the minimum required information as per Annexure-G of Chapter- 7 along with the offer or submit in any other format omitting required information essential to work out Bid capacity, his/their offer shall be rejected summarily. This information is to be based on Annexure-B & Annexure-G1, Chapter-7 of Annexed Document.
Please submit the required information for evaluation of Bid Capacity as per Annexure-G1, Chapter-7 of the Annexed Document.
Please submit the information regarding association of Railway Officers with tenderer(s) in reference to Clause 16, Chapter-2 of Annexed Document along with the declaration as per the format vide Annexure-H, Chapter-7 of the Annexed Document. Also non-submission of information required as per Clause 16 (a), (b) & (c) of Chapter-2 in Annexed Document, contract is liable to be dealt in accordance with provision of Clause 43 of Chapter-3 (Clause 62 of General Conditions of Contract).
Please submit list of court cases as per the format vide Annexure-I, Chapter-7 of the Annexed Document.
Please submit list of arbitration cases as per the format vide Annexure-J, Chapter-7 of the Annexed Document.
Please submit broad plan of execution of work as per the format vide Annexure-K, Chapter-7 of the Annexed Document.
Please submit details of other credentials/facilities as per the format vide Annexure-N, Chapter-7 of the Annexed Document.
Please submit your bank details i.e. Name of Bank along with Bank Branch Code, Accounts Number as appearing in the cheque book, IFSC Code and PAN Number, duly certified by the authorised official of the bank, to facilitate payment through ECS/NEFT/RTGS as per Annexure-O of Chapter-7 of Annexed Document. In lieu of Bank Certificate, scanned copy of a cancelled cheque may be attached for verification of the above particulars
If Bid Security is submitted through mode of Bank Guarantee then please upload scanned copy of the Bank Guarantee (as per Specimen Format at Annexure-Q, Chapter-7 of Annexed Document) submitted towards Bid Security original of which should be delivered in person to the official nominated as indicated in the tender document before closing date of submission of bids. (That is excluding the last date of submission of bids). Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within above specified period shall lead to summary rejection of bid. In case of the Bid Security deposited through e- payment gateway, then the same should be confirmed by the tenderer.
Please submit the option for taking payment through Letter of Credit (LC) arrangement for tenders having advertised cost of Rs. 10 lakhs and above. For details refer Clause-7, Chapter- 4 of Annexed Document.
Please submit the required certificate (duly certified by a Cost Accountant /CA)as per Clause 8.9(b), Chapter-4 of Annexed Document.
Please submit the Tender Form i.e. Annexure-I of Chapter-2 of Annexed Document.
Modification/Shifting of HT/LT power line crossings of Kuruda-Mahuldiha in connection with Talcher-Bimlagarh New BG line of East Coast Railway
ETELCONBBST-384E~ECOR
ETELCONBBST-384E
Open
Works - General
9 Months
Khordha, Odisha
₹0
₹9.6 L
4 Aug 2026
4 Aug 2026
20 Aug 2026
213 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 4,79,51,717.58 | ||
| — | 142.00 | — | — | ||
| Supply of 11 Mtr long 150mmx150 mm RS joist pole ( 34.6kg per mtr). | — | — | — | 65,54,010 | |
| — | 142.00 | — | — | ||
| Erection of 11 Mtr long 150mmx150 mm RS joist pole ( 34.6kg per mtr). | — | — | — | 3,27,700.5 | |
| — | 2580.00 | — | — | ||
| Supply of 11KV 3Core X400Sqmm XLPE cable. | — | — | — | 87,31,752 | |
| — | 1516.00 | — | — | ||
| Installation, Laying, Commissioning & Testing of 11kV, 3Core, 400sqmm, XLPE insulation armoured U/G cable by making trenchless duct 160/200mm dia HDPE pipe casing using HDD machine including supply of HDPE pipe as per IS 4984, PN8 Class PE80 | — | — | — | 55,27,775.64 | |
| — | 1430.00 | — | — | ||
| Supply of cable 1.1KV AL 4cx150sqmm XLPE armoured (SC rating of cable in KA 28.2KA and SC rating of Armour in KA-16.98kA). | — | — | — | 36,30,841.5 | |
| — | 632.00 | — | — | ||
| Installation, Laying, Commissioning & Testing of 1.1KV AL 4cx150sqmm , XLPE insulation armoured U/G cable by making trenchless duct with 110mm dia HDPE pipe casing using HDD machine including supply of HDPE pipe as per IS 4984, PN8 Class PE80 | — | — | — | 20,63,366.24 | |
| — | 1100.00 | — | — | ||
| Laying of XLPE cable of different sizes In the air/loop/chamber. | — | — | — | 35,156 | |
| — | 762.00 | — | — | ||
| Cable laying through G.I.pipe of different size/ Nominal bore /PVC pipe (without supply of PVC/GI pipe) / PVC pipe. | — | — | — | 22,006.56 | |
| — | 34.00 | — | — | ||
| Construction of cable Loop chamber (Size 15'x12'x5') in KB bricks , filling with sand & covered with 2" thick concrete slab for protection of cable & provision for lifting of cover. | — | — | — | 74,74,946.24 | |
| — | 406.00 | — | — | ||
| Supply and erection of GI Pipe of dia. 160mm | — | — | — | 4,64,695.42 | |
| — | 152.00 | — | — | ||
| Supply of GI Pipe Earthing 40mm. 3 Mtr. Long | — | — | — | 2,60,461.12 | |
| — | 156.00 | — | — | ||
| Construction of Earthing chamber including installation of earthing pipe(GI) 3MTR 40MM/50MM, making earthing chamber including excavation, soil treatment with Bentonide powder (25 Kg), calculation of earth resistance including, connection & welding with incoming earth Flat (GI). The work to be executed as per TPWODL drawing & design | — | — | — | 7,08,486.48 | |
| — | 3652.00 | — | — | ||
| Supply of 50x6mm Flat (GI) for earthing, 2.36kg/Mtr.(12.5Mtr for LA, 3Mtr for AB Switch body, 2.5 Mtr for mesh formation and 2.5/5 mtr for raising) | — | — | — | 4,46,968.28 | |
| — | 3652.00 | — | — | ||
| Erection of 50x6mm Flat (GI) for earthing, 2.36kg/Mtr.(12.5Mtr for LA, 3Mtr for AB Switch body, 2.5 Mtr for mesh formation and 2.5/5 mtr for raising) | — | — | — | 44,737 | |
| — | 44.00 | — | — | ||
| Supply of 11KV Outdoor jointing kit for 3Core X400Sqmm XLPE cable | — | — | — | 9,98,396.08 | |
| — | 44.00 | — | — | ||
| Erection of Straight through jointing Kits/Outdoor termination kits/Indoor termination Kits Heat Shrinkable type suitable for 11kV,3CORE,400sqmm,aluminium UG cable kits | — | — | — | 1,01,442.88 | |
| — | 24.00 | — | — | ||
| Supply of 1.1KV Outdoor jointing kit for 4Core X150Sqmm XLPE cable | — | — | — | 1,34,164.08 | |
| — | 24.00 | — | — | ||
| Erection of Straight through jointing Kits/Outdoor termination kits/Indoor termination Kits Heat Shrinkable type suitable for 1.1kV,4Corex150sqmm,aluminium UG cable kits | — | — | — | 34,424.64 | |
| — | 5578.17 | — | — | ||
| Supply of GI Channel 100 mm x 50 mm x 6 mm. | — | — | — | 6,82,712.23 | |
| — | 5578.17 | — | — | ||
| Erection of GI Channel 100 mm x 50 mm x 6 mm. | — | — | — | 68,332.58 | |
| — | 1644.18 | — | — | ||
| Supply of GI Channel 75mm x 40 mm x 5 mm. | — | — | — | 2,01,231.19 | |
| — | 1644.18 | — | — | ||
| Erection of GI Channel 75mm x 40 mm x 5 mm. | — | — | — | 20,141.21 | |
| — | 1134.54 | — | — | ||
| Supply of GI Channel 50mm x 50 mm x 6 mm. | — | — | — | 1,38,856.35 | |
| — | 1134.54 | — | — | ||
| Erection of GI Channel 50mm x 50 mm x 6 mm. | — | — | — | 13,898.11 | |
| — | 72.00 | — | — | ||
| Supply of Lighting Arrester (12KV,10KA) (Station Class, Class-2) | — | — | — | 4,35,502.08 | |
| — | 72.00 | — | — | ||
| Erection of Lighting Arrester (12KV,10KA) (Station Class, Class-2). | — | — | — | 43,549.92 | |
| — | 2998.00 | — | — | ||
| Supply of pipe 160mm HDPE. | — | — | — | 2,36,002.56 | |
| — | 2998.00 | — | — | ||
| Laying of pipe 160mm HDPE. | — | — | — | 23,594.26 | |
| — | 9890.00 | — | — | ||
| Supply of 11KV 100 sq. mm XLPE insulated AAAC conductor. | — | — | — | 24,28,489.5 | |
| — | 9890.00 | — | — | ||
| Stringing of 11KV 100 sq. mm XLPE insulated AAAC conductor. | — | — | — | 83,669.4 | |
| — | 68.00 | — | — | ||
| Supply and Erection of Cable Route Marker along the cable route at an interval of 30mtrs with civil works. | — | — | — | 84,467.56 | |
| — | 2.84 | — | — | ||
| Dismantaling cost of 11KV line. | — | — | — | 54,333.6 | |
| — | 1.75 | — | — | ||
| Dismantaling cost of LT line. | — | — | — | 28,803.81 | |
| — | 22.00 | — | — | ||
| Supply of pole clamp for AB cable. | — | — | — | 9,069.72 | |
| — | 22.00 | — | — | ||
| Erection of pole clamp for AB cable | — | — | — | 907.06 | |
| — | 21.00 | — | — | ||
| Supply of dead end clamp for AB cable. | — | — | — | 2,456.37 | |
| — | 21.00 | — | — | ||
| Erection of dead end clamp for AB cable. | — | — | — | 245.7 | |
| — | 20.00 | — | — | ||
| Supply of suspension clamp. | — | — | — | 12,237.2 | |
| — | 20.00 | — | — | ||
| Erection of suspension clamp | — | — | — | 1,223.8 | |
| — | 18.00 | — | — | ||
| Supply of eye hook for AB cable. | — | — | — | 1,943.64 | |
| — | 18.00 | — | — | ||
| Erection of eye hook for AB cable. | — | — | — | 194.4 | |
| — | 36.00 | — | — | ||
| Supply of piercing Connector | — | — | — | 5,668.56 | |
| — | 36.00 | — | — | ||
| Erection of piercing Connector | — | — | — | 566.64 | |
| — | 16.00 | — | — | ||
| Supply of Neutral Connector Type-B | — | — | — | 1,039.04 | |
| — | 16.00 | — | — | ||
| Erection of Neutral Connector Type-B | — | — | — | 104 | |
| — | 30.00 | — | — | ||
| Supply of Earthing of support (Coil Type) | — | — | — | 8,962.2 | |
| — | 30.00 | — | — | ||
| Erection of Earthing of support (Coil Type) | — | — | — | 896.4 | |
| — | 34.50 | — | — | ||
| Supply of No-8 GI wire (Dia 4.6mm) 0.131 KG/Mtr- 2Mtr | — | — | — | 4,408.76 | |
| — | 34.50 | — | — | ||
| Erection of No-8 GI wire (Dia 4.6mm) 0.131 KG/Mtr- 2Mtr | — | — | — | 441.25 | |
| — | 1781.00 | — | — | ||
| Supply of GI Nut , Bolt & Washer of different sizes | — | — | — | 2,36,694.9 | |
| — | 1781.00 | — | — | ||
| Fixing of GI Nut , Bolt & Washer of different sizes | — | — | — | 23,687.3 | |
| — | 3.00 | — | — | ||
| Supply of Service connection Distribution box (8 way) | — | — | — | 23,618.25 | |
| — | 3.00 | — | — | ||
| Erection of Service connection Distribution box (8 way) | — | — | — | 2,361.84 | |
| — | 31.00 | — | — | ||
| Supply of L.T. Stay set (Complete) | — | — | — | 27,466.31 | |
| — | 1057.00 | — | — | ||
| Supply of 7/8/10/12 SWG Stay Wire | — | — | — | 1,35,074.03 | |
| — | 31.00 | — | — | ||
| Supply of L.T. Stay clamp (1.40kg/pair) | — | — | — | 5,810.33 | |
| — | 31.00 | — | — | ||
| Supply of L.T Stay insulator | — | — | — | 1,584.41 | |
| — | 29.00 | — | — | ||
| "Fixing of complete LT line complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate3) Stay Insulator4) Stay Wire5) Stay clamps with Nuts & bolts BA will do the excavation including excavation, supply of 0.5Cum cement concrete foundation 1:2:4 size ( 500mmx500mmx800mm) using 20mm BHG metal with all labour and material as per TPWODL Drawing & Standard. (Exacavation of earth will be done of size 500x500x1500 mm). " | — | — | — | 83,619.47 | |
| — | 106.00 | — | — | ||
| Supply of Danger Plate | — | — | — | 14,014.26 | |
| — | 106.00 | — | — | ||
| Erection of Danger Plate | — | — | — | 1,401.32 | |
| — | 91.00 | — | — | ||
| Supply of Back Clamp for danger Plate 25X3 mm. Flat (GI) 0.59Kg/Mtr. Flat(GI) of 0.510Mtr length. | — | — | — | 11,279.45 | |
| — | 91.00 | — | — | ||
| Erection of Back Clamp for danger Plate 25X3 mm. Flat (GI) 0.59Kg/Mtr. Flat(GI) of 0.510Mtr length | — | — | — | 1,128.4 | |
| — | 2256.00 | — | — | ||
| Supply of 3x50sqmm+1x25sqmm+1x16sqmm AB cable | — | — | — | 6,21,618.24 | |
| — | 2256.00 | — | — | ||
| Stringing of 3x50sqmm+1x25sqmm+1x16sqmm AB cable | — | — | — | 62,175.36 | |
| — | Breakup | for details. | — | ||
| Concreting and couping | — | — | — | 6,10,501.69 | |
| — | 54.00 | — | — | ||
| Supply of H.T. Stay set (Complete) | — | — | — | 92,532.24 | |
| — | 54.00 | — | — | ||
| Supply of H.T. Stay Insulator Type-C | — | — | — | 4,600.8 | |
| — | 54.00 | — | — | ||
| Supply of H.T. Stay Clamps (1.95kg/pair) | — | — | — | 11,501.46 | |
| — | 54.00 | — | — | ||
| "Fixing of complete 11KV/33KV line complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate3) Stay Insulator4) Stay Wire5) Stay clamps with Nuts & bolts BA will do the excavation including excavation, supply of 0.5Cum cement concrete foundation 1:2:4 size ( 500mmx500mmx800mm) using 20mm BHG metal with all labour and material as per TPWODL Drawing & Standard. " | — | — | — | 1,49,121 | |
| — | 231.00 | — | — | ||
| Supply of 11 KV pin insulator polymer | — | — | — | 78,717.87 | |
| — | 231.00 | — | — | ||
| Erection of 11 KV pin insulator polymer | — | — | — | 7,872.48 | |
| — | 303.00 | — | — | ||
| Supply of Hardware fitting(B&S) 70KN, 3Bolt | — | — | — | 1,80,691.02 | |
| — | 303.00 | — | — | ||
| Fixing of Hardware fitting(B&S) 70KN, 3Bolt | — | — | — | 18,070.92 | |
| — | 369.00 | — | — | ||
| Supply of Disc insulator (B&S) 70 KN polymer | — | — | — | 7,23,025.98 | |
| — | 369.00 | — | — | ||
| Erection of Disc insulator (B&S) 70 KN polymer | — | — | — | 72,305.55 | |
| — | 760.00 | — | — | ||
| Supply of GI barbed wire anticlimbing device | — | — | — | 99,218 | |
| — | 760.00 | — | — | ||
| Erection of GI barbed wire anticlimbing device | — | — | — | 9,918 | |
| — | 560.00 | — | — | ||
| Supply of Back Clamp for anticlimbing device 25X3 mm. Flat (GI), 0.59Kg/Mtr. Flat (GI) of 0.510Mtr length . | — | — | — | 68,538.4 | |
| — | 560.00 | — | — | ||
| Erection of Back Clamp for anticlimbing device 25X3 mm. Flat (GI), 0.59Kg/Mtr. Flat (GI) of 0.510Mtr length . | — | — | — | 6,860 | |
| — | 22.00 | — | — | ||
| Black Paint (GIS Numbering & Zebra Stripping) with painting. | — | — | — | 8,246.7 | |
| — | 22.00 | — | — | ||
| Yellow Colour Paint (GIS Numbering & Zebra Stripping for Background with painting. | — | — | — | 4,615.6 | |
| — | 18.00 | — | — | ||
| "Preparation and submission of proposal plan and drawing for pre execution approval for each location (2 Copies- A1 Sheet and soft copy in dwg and pdf format)." | — | — | — | 9,671.04 | |
| — | 18.00 | — | — | ||
| "Preparation and submission of as erected/completion drawing for pre commissioning approval/sanction for each location (2 Copies- A1 Sheet and soft copy in dwg and pdf format)." | — | — | — | 9,671.04 | |
| — | 18.00 | — | — | ||
| Preparation and submission of technical test report and completion certificate as per I.E Rule for each location | — | — | — | 9,671.04 | |
| — | 10.00 | — | — | ||
| Supply of 3 pole- gang operated - 11 KV AB Single - break Isolator - 400 Amp | — | — | — | 2,01,905.4 | |
| — | 10.00 | — | — | ||
| Erection of 3 pole- gang operated - 11 KV AB Single - break Isolator - 400 Amp | — | — | — | 20,190.6 | |
| — | 1.00 | — | — | ||
| Supply of 3 pole- gang operated - 11 KV AB double - break Isolator - 400 Amp | — | — | — | 60,246.26 | |
| — | 1.00 | — | — | ||
| Erection of 3 pole- gang operated - 11 KV AB double - break Isolator - 400 Amp | — | — | — | 6,024.62 | |
| — | 528.00 | — | — | ||
| Supply of PG Clamp for 100 sqmm covered conductor. | — | — | — | 6,02,738.4 | |
| — | 528.00 | — | — | ||
| Fixing of PG Clamp for 100 sqmm covered conductor. | — | — | — | 60,276.48 | |
| — | 108.00 | — | — | ||
| Supply of PG Clamp for 55 sqmm covered conductor. | — | — | — | 77,108.76 | |
| — | 108.00 | — | — | ||
| Fixing of PG Clamp for 55 sqmm covered conductor. | — | — | — | 8,567.64 | |
| — | 80.00 | — | — | ||
| Supply of Fish Plate (Gl) 50x6 mm., 2.36 kg/Mtr, each 0.280 Mtr. Length | — | — | — | 9,227.2 | |
| — | 80.00 | — | — | ||
| Erection of Fish Plate (Gl) 50x6 mm., 2.36 kg/Mtr, each 0.280 Mtr. Length | — | — | — | 923.2 | |
| — | 10.00 | — | — | ||
| Supply of 11KV 400Amp Isolator without earth switch | — | — | — | 6,00,267.4 | |
| — | 10.00 | — | — | ||
| Erection of 11KV 400Amp Isolator without earth switch | — | — | — | 51,803 | |
| — | 3.00 | — | — | ||
| Supply of outdoor feeder pillar consisting of copper bus bar 300Amp with LED type indication lamp for RYB in incoming side in a CRS sheet with double door provision & locking arrangement. The panel shall be consist of I/C:1X200A MCCB 4P Ics 36KA with multi function energy meter with 200/5A CTs, O/G:4x100A MCCB TPN Ics 25KA ,6 Nos. x 4 Way - 200 Amp Terminal Block, size: 1500mmX1000mmX350mm approx, sheet : 1.6mm thick, Angle :40x40x6mm, Channel :75X40mm) (For MCCB's Ics=100% Icu). | — | — | — | 3,59,130 | |
| — | 3.00 | — | — | ||
| Erection, testing & commissioning of floor mounted panel /outdoor feeder pillar on the brick pedestal. | — | — | — | 3,398.07 | |
| — | 2.00 | — | — | ||
| Supply of H G Fuse (11KV 200A, 3Pole) | — | — | — | 23,335.6 | |
| — | 2.00 | — | — | ||
| Erection of H G Fuse (11KV 200A, 3Pole) | — | — | — | 2,333.56 | |
| — | 27.00 | — | — | ||
| Supply , Installation, Testing & commisioning of GI Fencing with Gate(Metre is taken instead of RM) | — | — | — | 1,25,906.4 | |
| — | 1.00 | — | — | ||
| Construction of plain concrete transformer plinth with cement concrete 40mm grade. (Size of plinth :2Mx1.5Mx3.1M, below ground level:2MX1.5MX1.6M,above ground level:2MX1.5MX1.5M) | — | — | — | 59,157.92 | |
| — | 65.00 | — | — | ||
| Supply of 11 KV V cross Arm(GI) (10.2 K.g. each ) | — | — | — | 80,971.8 | |
| — | 65.00 | — | — | ||
| Erection of 11 KV V cross Arm(GI) (10.2 K.g. each ) | — | — | — | 8,097.05 | |
| — | 59.00 | — | — | ||
| Supply of "F" Clamp for 11 KV Pin insulators | — | — | — | 7,221.01 | |
| — | 59.00 | — | — | ||
| Erection of "F" Clamp for 11 KV Pin insulators | — | — | — | 722.75 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
03.08.26-T-384EAnnexedDocument1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].