CO New Smart Class room, conference Hall, Terrace Canteen in Rajiv Gandhi Govt. Degree College at Kotshera Shimla H.P SH Prov. E.I therein

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole. Cat-A.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way , Double door

8 way , Double door

Supplying and fixing following way, CRCA sheet steel enclosure, IP 30 - Metal Door, RAL9003, powder coated, suitable for surface and flush mounting, with provision to mount MCB/Isolator/RCCB/RCBO and other modular devices, including interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator etc.)

MCB Enclosure 2/3 or 4 way

Supplying and fixing Higher Rating (80 to 125A) 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

MCB DP 50/63 A 'C' curve

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make

LED Batten Light 20W

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Armoured cable 25 sq. mm (3.5 core)

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.

Armoured cable 25 sq. mm (3.5 core)

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make

Square/round LED Panel Light 6/7W Surface

Square/round LED Panel Light 10/12W Surface

Square/round LED Panel Light 15W Surface

Square/round LED Panel Light 24W Surface

Square LED Panel Light 36W Surface

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:-

25 Liter capacity water heater (Cat-A)

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Providing and installation of Light duty, plastic body, ventilating fan of following sizes in the existing opening, by means of suitable rag-bolts/nuts, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respects to the satisfaction of the Engineer-in-Charge:- Make: Havell's, Bajaj, Crompton Greaves, Usha, Kahitan etc.

Ventilating Fan, Light duty, (Plastic body) 250 mm

Supplying and fixing electrical switch board, having 3 No. of 5 amp. modular switches and socket on suitable size of modular G.I box of 205mm X78 mm X 50 mm deep ( nominal size) on surface or in recess with suitable size modular sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp modular socket outlet and 5/6 amp modular switch, connection, painting etc.as req. (For light plugs)

Providing & fixing IO switch with plate and cat-6 connector with pvc box as required complete in all respects.

Post Lantern Fixtures are made of die cast alum base and spun alum . LED Bulb are mounted directly on in built extruded alum Twinkle make of complete with connections etc as required capable in all respects complete in all respect including connection etc. as required

Providing and fixing hot and cold split type Air conditioner 1.5 ton including outdoor unit bracket and stablizer complete in all respects as per the best satisfaction of Engineer-in-charge.

SUB Panel

Incomer :

Fabrication/Painting & Assembly

Fabrication charges of cubical type,Indoor type, Single door, Wall mounted, fixed type, free standing single front, dust proof & compartmentalized Distribution Board made out of M.S. CRC Sheet 16G, duly painted with Siemens Grey Powder Coated Paint as per specification. Overall size (H) 800 mmX(W)450 X (D) 200mm.

Assembly Charges of 63A 4Strip Copper Busbar (Horizontal/ Vertical) & Earth strip throughout the lenth of panel (current density of Aluminium Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black.

Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB & MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables.

Control Wiring with Copper flexible Wire (size of control wire shall be 2.5 sq. mm Copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc.

Assembly Charges of Accessories like Gasket, Doorlocks, Copper flexible door earth, legend plates etc.

Yog Raj

RAJNEESH THAKUR

M/S Electrical Solutions