Providing Fire Fighting System in S K S Kishan Lal at Jalan Eye Hospital Bhiwani (Pdg. Fire Alarm System only)

Amount

[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia.

Supply of ABC Stored Preassure type Fire Extinguisher 6kg. Capacity (5 year warranty) bearing ISI Mark for fire fighting ABC class of fire extinguisher will be manufactured strictly as per BIS IS:683:2006 bearing ISI Mark EN3 615 approved powder (MAKE CEASEFIRE / SAFEX/ SAVEMAX)

Supply of 15 U rack for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit Make: D-LINK /Comrack / Vall Rack.

Supply of Co2 type Fire Extinguisher 4.5 Kgs capacity made from brand new seamless cylinder, as per ISI 7285 and CCE approval, fitted with a Discharge hose and horn and squeeze Grip type valve with initial charge as per ISI 15683:2006 specification, bearing ISI Mark.(Make - Cease fire/ Savemax/ SAFEX).

Supply of 2KVA Online UPS with 2hr power Backup with all necessary accessories civil electrical works and peripheral items.. (Makes:- Eaton/LUMINIOUS/ELNOVA.

Wiring for Fire Alarm system with the following sizes of FRLS insulated copper conductor single core 1100 volts grade cables in existing surface/recessed M.S. conduit etc. as complete as required. Make Finolex/Grandly/Polycab 2 x 1.5 sq.mm

SITC of Analog Addressable type Active Repeater Fire Alarm Panel with Backlit LCD display, having controlls for reset, mute, accept, silence alarms and self test conforming to BS5839 standards with all labour and materials required to complete the job in all respect up to the entire satisfaction for engineer-in-charge of work. Make Siemens/Honeywell/G.S.T

SITC of addressable Heat Detector with fixed and rate of raise feature including mounting base with LED etc complete as required. Each detector should have 2 as per NFPA 72 style 7 wiring requirement (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance with EFSG agreement EFSG/F/97/005. Detector should monitor electromagnetic interference and report to the panel current and average values, EMC safety for detector shall be 50 V/m. shall be EN54/VDS/U: certification. (Detectors without inbuilt isolators may be considered with an additional isolator module per detector. Make Siemens/Honeywell/G.S.T

Supply, installation, testing and commissioning of intelligent Analog Addressable type Isolator having Surface or flush mounting option fully compliant to EN 54 having Rotary Decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect Make Siemens/Honeywell/G.S.T

Supply, installation, testing and commissioning of intelligent Analog Addressable type Manual Call Point having Surface or flush mounting option fully compliant to EN 54 having Rotary Decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect Make Siemens/Honeywell/G.S.T

SITC of Intelligent Analog Addressable type Response Indicator with all labor and material required to complete the job in all respect Make Siemens/Honeywell/G.S.T

Supply Installation, Testing and Commissioning of Glow Type Exit Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class - I material PSPA fixed on 3 mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener Managed Type including cost of labour and material required to complete the job in all respect. Make:- PES/Glolite/OMEX

Supply of addressable Loop powered hooter with strobe complete with mounting base as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required complete the of in all respect . Make Siemens/Honeywell/G.S.T

SITC of Micro processor based 2 wire fault tolerant, networkable type Fire Alarm / Detection Control Panel (Expandable to 2 loops to suit minimum 20% extra over the nos. of fire detectors). The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes. Further, the panel must have 4 access levels and Panel should be able to automatically switch ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 7` or bigger Touch Screen to Program and indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet Steel power coated, sealed to IP30. The Panel shall have 2000 Zones with individual LED Indicators, expandable to Virtual 40 LED Indicators. The Panel shall have 2 Serial Ports. The panel shall have a built in power supply, battery charger maintenance free battery capable of running for a minimum 24 hours operation complete as required and 10000 Event Log History . And conforming to BS5839 standards and Duly Approved by EN 54/UL/VDS as per specifications complete in all respect up to the entire satisfaction of Engineer-in – charge of work. Make Siemens/Honeywell/G.S.T

Supply, installation, testing and commissioning of Addressable Monitor Module for monitoring of a line with EOL resistor/ Potential free contact/voltage monitoring shall be EN54/UL/VDS approved. (In case of 2 monitoring features in one module (points) each point shall be consider separately for payment).Make Siemens/Honeywell/G.S.T

Supply, installation, testing and commissioning of Addressable Loop powered sounder with strobe/flasher complete with mounting base as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect Make Siemens/Honeywell/G.S.T

Supply, installation, testing and commissioning of Addressable Control Relay Module with flexible network structures with a maximum switching current of 1A @ 30V DC. Shall be EN54/UL/VDS Certification Make Siemens/Honeywell/G.S.T

SITC of addressable Photoelectric detector including base, auto addressing features as required. Detectors should have 2 as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elemnets in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance wiht EFSG agreement EFSG/F/97/005. EMC safety for detector shall be 50 V/m. shall be EN54/VDS/UL certification. (Detectors without inbuilt isolators may be considered with an additional isolator module after 20 devices) Makes: G.S.T / Siemens /Honeywell Moreley.. (Rate are excluding of GST)

INDIAN SECURITY AND FIRE SAFETY

Hytek Turnkey Projects Pvt. Ltd.