Road safety and signage works on main roads within Sardhana Block, Meerut District

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, VAT etc. all T&P/machine material and labour required for proper completion of work (Excluding GST) As per SI.No. 7

Providing and laying of hot applied thermoplastic compound 5.0 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5.0 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. (For Bar Marking Yellow Colour) Repeated Bar.

Reflective Raised Pavement Marker with shanks Providing and fixing of raised pavement markers with twin shanks of adequate length anchored with epoxy / bitumen adhesive of approved make(Cat Eye) Type x-ASTMD-4956-04 Avery Dennision/3m (USA Make) having moulded body of polycarbonate, ASA, HIPS or ABS able to support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H Circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. The length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively. The area of each reflective surface shall not be less than 13 Sq. cm. on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of Category A of MORT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent. With 7 years warranty. Rate shall be inclusive of all taxes, rovalty etc etc All T&P/machine material and labour but exclusive GST.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting Type IV vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly design foundation with M-15 grade cement concrete 60 cm below ground level as per approved drawing Stop sign board

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting Type IV vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly design foundation with M-15 grade cement concrete 60 cm below ground level as per approved drawing T inter section

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting Type IV vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly design foundation with M-15 grade cement concrete 60 cm below ground level as per approved drawing Speed limit sign

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting Type IV, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly dsigned foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, below ground level as per approved drawing. The retro Reflective Sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per IRC 67: 2012 (Left/Right Hazard Marker Sign Board) 300mm x 900 mm. as per SI No. 6(0) Ch. 27 (SOR Rates 3321)