SPECIAL REPAIRS TO T 28 T 29 T 39 AND CONNECTED BLDG AT PASTA LINE COLABA UNDER GE (NW) NOFRA COLABA MUMBAI

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings from any height, complete all as specified and as directed by Engr-In-Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed by Engr-In-Charge.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed by Engr-In-Charge.

Dismantling boarding, any description, fixed in any position in ceiling or any other position, complete all as specified and as directed by Engr-In-Charge.

Demolition of cement concrete in ground floors and pavings any thickness (below or above ground level), complete all as specified and as directed by Engr-In-Charge.

M&L for PCC (1:2:4) type B-0 (12.5mm graded stone aggregate) as in padding concrete to maintain slope towards drain pipe mixed with WPC 3% by weight of cement , finished even & smooth without using extra cement, complete all as specified and as directed by Engr-In-Charge. Note : (WPC measured and paid separately)

M&L for 15mm thick screed bed or bedding layer of mortar in CM (1:4) for laying roof finish as padding finished with mixing WPC @2% of the weight of cement including finished even & smooth without using extra cement. Note : (WPC measured and paid separately)

M&L for cutting grove of 35mm depth in parapet wall / RCC slab and embedding 25mm of APP membrane into wall & filling of gap with CM (1:2), complete all as specified and as directed by Engr-In-Charge.

Material and labour for providing water proofing treatment with five layered 4 mm thick APP (Atatic poly propylele) modified bituminous membrane re-inforced with non woven polyster mat of weightr 180 gms/sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythlene applied by the thermo fusion using LPG finishing the treatment with one coat of bitumen and one coat of aluminium paint over APP membrane (An overlap of 100 mm & 150 mm shall be provided on sides ends respectively) Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of primer for APP membrane and SBR latex complete all as specified and as directed by Engr-In-Charge. (iii) The quoted rate shall be inclusive of one coat of aluminium paint & one bitumen coat @ 1.2 Kg/Sqm over APP membrane & finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm as prescribed by manufacturer of membrane.

M&L for Cement concrete type D2 (1:4:8) by using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed by Engr-In-Charge.

Material and labour for Rolled sections as in vertical post, main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410- W (Gde-E-250) quality A. complete all as specified and as directed by Engr-In-Charge.

Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410- W (Gde-E-250) quality A. complete all as specified and as directed by Engr-In-Charge.

Material and labour for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410- W (Gde-E-250) quality A. complete all as specified and as directed by Engr-In-Charge.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-In-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-In-Charge.

Preparation of new steel surfaces & apply two coats of synthetic enamel paint over a coat of red oxide primer and preparing the steel surfaces, complete all as specified and as directed by Engr-In-Charge.

M&L for false ceiling made out of 600x600x 4 to 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed. (Make -Armstrong/Chanakya/Everest. complete all as specified and as directed by Engr-In-Charge.

Taking down of chowkhats or frames without taking off shutters from the frame but n.exc 1.5 Sqm each, complete all as specified and as directed by Engr-In-Charge.

Taking down of chowkhats or frames without taking off shutters from the frame exc 1.5 Sqm but n.exc 4.00 Sqm each, complete all as specified and as directed by Engr-In-Charge.

S&F aluminium anodised various section as required for doors, window & partition etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement for shutter, sealant etc complete all as specified and as directed by Engr-In-Charge. Note:-Aluminium doors, window & partition to be fixed with cadmium plated screw not less then 300 mm C to C & sealing the joints between frames & kota stone with polysulphide sealant as per the manufactures instruction".

S&F aluminum anodised GRILL (Deco grill DG 103 of 7.5 mm thick , fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and as directed by Engr-In-Charge.

S&F in aluminium alloy wire cloth (Wire dia 0.45 mm) and average width of aperture 1.40 mm and fixed with aluminium beading if necessary complete all as specified and as directed by Engr-In-Charge.

Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing rubbish off the premises (outside MD land) complete all as specified and as directed by Engr-In-Charge.

M&L for 25mm thick PCC type B-0 (1:2:4) by using 12.5mm graded stone aggregate) & levelling to receive the tiles, complete all as specified and as directed by Engr-In-Charge.

M&L for coloured non-skid ceramic tiles 7-8mm thick rectified glossy (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over/ incl 15mm thick screed bed (1:6), complete all as specified and as directed by Engr-In-Charge. MAKE : Kajaria or Somany or Orient bell

M&L for coloured non-skid ceramic tiles 7-8mm thick rectified glossy (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11sqm in skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM (1:4), complete all as specified and as directed by Engr-In-Charge. MAKE : Kajaria or Somany or Orient bell

M&L for coloured glazed ceramic tiles as in vertical surface, of size exc 0.06 Sqm and not exc 0.16 Sqm 7-8mm thick as approved by GE as in dado/skirting or on vertical surface, over and including 10mm thick backing coat in CM 1:4,set and jointed in neat cement slurry and pointed in white or colour cement match to existing complete all as specified and as directed by Engr-In-Charge. MAKE : Kajaria or Somany or Orient bell

M&L for 40mm thick PCC type B-1 (1:2:4) by using 20mm graded stone aggregate) & finishing cement concrete surface even & smooth without using extra cement, complete all complete all as specified and as directed by Engr-In-Charge.

Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and as directed by Engr-In-Charge.

M&L for machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in flooring including rubbing and polishing laid over and including 20 mm thick cement screed base (1:4) complete all as specified and as directed by Engr-In-Charge.

M&L for machine cut kota stone slab 20-25 mm thick laid over and including 15 mm thick cement screed (1:4) backing coat, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in riser of step skirting dado and piller etc including rubbing and polishing complete all as specified and as directed by Engr-In-Charge.

M&L for machine cut kota stone slab 20 to 25mm thick in treads risers, in window cill ( length will be one length of opening without joints) over cement screed base 10mm thick CM(1:4) laid & joinjted with cement slurry mixed with pigment to match the shade of the slab including rubbing and moulding complete all as specified and as directed by Engr-In-Charge.

Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed by Engr-In-Charge.

Material & Labour for rendering 15mm thick CM 1:6 on fair face of brick work or concrete surfaces of walls and finised surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-In-Charge.

Material & Labour rendering 10 mm thick cement plastering on ceiling surfaces in CM (1:3) finished even and smooth without using extra cement complete all as specified and as directed by Engr-In-Charge.

Material & Labour for rendering 15mm thick CM 1:4 on fair face of brick work or concrete surfaces of walls and finised surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-In-Charge.

Material & Labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over layer of smooth putty finish punning over a coat of primer as per manufactuure instruction with smooth roller finish complete all as specified and as directed by Engr-In-Charge. MAKE : Asain Paint Tractor uno or Berger Bison or equivalant in nerolac.

Material & Labour for preparation of new plastered or unplastered surfaces ofceilings and applying two coats of oil bound distemper over layer of smooth putty finish punning over a coat of primer strictly as per manufactuure instruction with smooth roller finish complete all as specified and as directed by Engr-In-Charge. MAKE : Asain Paint Tractor uno or Berger Bison or equivalant in nerolac.

M & L for preparation of newly plastered surfaces of walls, chajjas, parapets, pilasters etc and applying two coats of acrylic emulsion exterior weather proof paint (100 % Acrylic) on external surfaces over a coat of primer complete all as per manufacturer's instructions. complete all as specified and as directed by Engr-In-Charge.

M & L for preparation of old plastered surfaces of walls, chajjas, parapets, pilasters etc and applying two coats of acrylic emulsion exterior weather proof paint (100 % Acrylic) on external surfaces complete all as per manufacturer's instructions, complete all as specified and as directed by Engr-In-Charge.

Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of ceiling including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish punning as per manufacture instruction with smooth roller finish , complete all as specified and as directed by Engr-In-Charge. (Note after painting ,cleaning of all floors,glass & furniture by own arrangement).

Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish punning as per manufacture instruction with smooth roller finish , complete all as specified and as directed by Engr-In-Charge.

M&L for Chequered cement concrete tiles with grey cement & pigment 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 20mm thick screed bed in CM 1:4, complete all as specified and as directed by Engr-In-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/disintegrated rock, complete all as specified and as directed by Engr-In-Charge.

Demolition of brickwork or stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles & ht. upto 16th floor of bldg., complete all as specified and as directed by Engr-In-Charge.

M&L for brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6, complete all as specified and as directed by Engr-In-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft /disintegrated soil, complete all as specified and as directed by Engr-In-Charge.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and as directed by Engr-In-Charge.

M&L for 100mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate), complete all as specified and as directed by Engr-In-Charge.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) , complete all as specified and as directed by Engr-In-Charge.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves Slab including supports, overhangs, edges etc. also splays between floors and beams, etc. complete all as specified and as directed by Engr-In-Charge.

Material labour for Reinforced cement concrete type A1 (1 :1 1/2 : 3) using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed by Engr-In-Charge.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) offoundation and plinth beams;and similar work; vertical or to batter complete all as specified and as directed by Engr-In-Charge.

M&L Formwork to sides of pillars, posts, struts, piers, column sand stanchions complete all as specified and as directed by Engr-In-Charge.

M&L for Reinforced cement concrete type A1 (1 :1 1/2 : 3) (20mm graded stone aggregate) (nominal mix) as in foundation, footing, foundation beam and bases of column complete all as specified and as directed by Engr-In-Charge.

M&L for Reinforced cement concrete type A1 (1 :1 1/2 : 3) (20mm graded stone aggregate) (nominal mix)as in column complete all as specified and as directed by Engr-In-Charge.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engr-In-Charge.

M&L for TMT Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engr-In-Charge.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding complete all as specified and as directed by Engr-In-Charge.

S&F as in repair aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed by Engr-In-Charge.

S&F as in repair 20mm dia aluminium decorative type powder coated curtain rod or similar articles complete all as specified and as directed by Engr-In-Charge.

S&F 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed by Engr-In-Charge.

S&F 2nd class HW rail & style 35mm thcikness of Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated. complete all as specified and as directed by Engr-In-Charge.

S&F Glazed and skeleton shutters, 30mm thick hard work open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engr-In-Charge.

S&F stainless steel butt hinges medium weight of size 100mm complete all as specified and as directed by Engr-In-Charge.

S&F in extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and as directed by Engr-In-Charge. Make : Bharat or Classic or Argent

S&F in Aluminium alloy anodised barrel tower bolt 200mm long complete all as specified and as directed by Engr-In-Charge. Make : Bharat or Classic or Argent

S&F 300mm length of Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-In-Charge.

Preparation of new wooden surfaces & apply two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engr-In-Charge.

S&F as in repairs Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe-290 (gde E-165) complete all as specified and as directed by Engr-In-Charge.

S&F 3.15mm galvanised mild steel plain wire and tightning properly complete all as specified and as directed by Engr-In-Charge.

M&L for cutting holes in brick wall exc half brick but n.exc one brick built in cement mortar for inserting pipes ,bend etc and making good in cement concrete 1:2: 4 type B 1 as required, complete all as specified and as directed by Engr-In-Charge.

Disconnecting existing tanksof capacity upto 2000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required and reconnecting and re-fixing in position after Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and as directed by Engr-In-Charge.

Taking up or down 15mm bore steel tubing and connections , complete all as specified and as directed by Engr-In-Charge.

Taking up or down 20mm bore steel tubing and connections , complete all as specified and as directed by Engr-In-Charge.

S&F Steel water tubing galvanised medium grade (ISI marked) of 15mm bore, with all fittings fixed complete to walls and ceiling or laid in floor/wall/ ceiling (including scaffolding) complete all as specified and as directed by Engr-In-Charge.

S&F Steel water tubing galvanised medium grade (ISI marked) of 20mm bore, with all fittings fixed complete to walls and ceiling or laid in floor/wall/ ceiling (including scaffolding) complete all as specified and as directed by Engr-In-Charge.

Taking down Cast iron of 100mm bore fixed on wall or floor at any floor/ any height/ any location including all fittings & including scaffolding complete all as specified and as directed by Engr-In-Charge.

Taking down Cast iron of 75mm bore fixed on wall or floor at any floor/ any height/ any location including all fittings, complete all as specified and as directed by Engr-In-Charge.

S&F 75mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste fixed to wall complete all as specified and as directed by Engr-In-Charge.

S&F 100 mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste , laid in trenches or in floors or on walls complete all as specified and as directed by Engr-In-Charge.

M&L for 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including complete all as specified and as directed by Engr-In-Charge.

S&F stainless steel grating cover fixed in repairs to suit the 100mm/75mm dia nahani trap fixed with cement.

Supply and fixing bib tap 15 mm dia ,CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed.

S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed ,with suitable fittings fixed new line and in position complete all as specified .

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed ,with suitable fittings fixed new line and in position complete all as specified .

S&F 15mm Stop valves/ angle valve, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Material & Labour for Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed.

S&F for 200mm bore RCC pipe class NP-2 laid and jointed complete with collers as specified including testing all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including forming cradle after they are laid and tested for 200mm bore RCC pipe complete all as specified and as directed by Engineer-in-Charge.

M&L for 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick work finished even and smooth without using extra cement with WPC @ 3% by weight of cement complete all as specified and as directed by Engr-In-Charge.

Supply only integral water proofing compund complete all as specified and as directed by Engr-In-Charge.

M&L for PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in foundations, filling ad mass concrete complete all as specified and as directed by Engr-In-Charge.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching, coping, cills steps, parapets, railings up to 60cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and as directed by Engr-In-Charge.

M&L for forming fair finished drain or channel 200mm inner girth in cement concrete, using ex-tra cement, including forms, moulds, mi-tred/stopped ends etc complete all as specified and as directed by Engr-In-Charge..

Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 Sec) in cement concrete 1:2;4 type BI smooth finished and reforming benching as reqd for 200mm bore of pipe complete all as specified and as directed by Engr-In-Charge.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and as directed by Engr-In-Charge.

S&F in repairs cast iron manhole covers grade FG 150, machined each exceeding 5 Kg by weight complete all as specified and as directed by Engr-In-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed and sample shall be approved by GE complete all as specified and as directed by Engr-In-Charge.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement adhesive etc complete as specified and directed and sample shall be approved by GE complete all as specified and as directed by Engr-In-Charge. Make :- Rajshree, Sintex, Jain wood industries

S&F stainless steel butt hinges medium weight of size 75mm complete all as specified and as directed by Engr-In-Charge.

S&F in extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and as directed by Engr-In-Charge. Make : Bharat or Classic or Argent

S&F in Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and as directed by Engr-In-Charge.

Supply and fixing in repairs over head shower rose complete all as specified and as directed by Engr-In-Charge.

M&L Vitreous water closet (orissa pattern) 'long pan', white with 'P' or 'S' trap, front or back inlet any pattren and fixed as in repairs complete all as specified and as directed by Engr-In-Charge.

S&F in repairs 10 ltr cap PVC Valveless, syphonic action type, flushing cistern low level all accesories complete all as specified and as directed by Engr-In-Charge.

S&F in repairs tubular towel rail brass chromium plated 20mm dia D type 60cm long between flanges including a pair of brackets complete all as specified and as directed by Engr-In-Charge.

S&F 32mm dia PVC (flexible) waste pipe complete all as specified and as directed by Engr-In-Charge.

S&F 450 mm long PVC connections with PTMT nuts etc complete all as specified and as directed by Engr-In-Charge.

S&F rotational moulded polythylene water storage loft tank tank of 1000 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) complete all as specified and as directed by Engr-In-Charge.

S&F in repair wash hand basin vitreous china white counter top type oval shaped of size 550mm minimum including waste cupling waste pipe and suitable PVC connection pipe etc. complete all as specified and as directed by Engr-In-Charge.

M&L for machine cut cudappa stone slab 40 mm thick fixed in walls by cutting groves and cement and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed by Engr-In-Charge.

M&L for refixing of cement concrete interlocking paver tiles 60/80mm thick laid over and including 50 mm thick dry sand cushioning and voids filled with dry sand and surface compact, including compation by means of surface vibrator, all as manifacture instructions complete all as specified and as directed by Engr-In-Charge.

S&F as in repairs in stainless steel wire cloth (Wire dia 0.36 mm) and average width of aperture 1.40 mm and fixed with aluminium beading complete all as specified and as directed by Engr-In-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete all as specified.

Material and labour for point wiring complete with PVC insulated, unsheathed cable, 1100 volts grade with multistranded copper conductor of 1.5 sq mm (FRLS) drawn through and including PVC casing and caping of suitable size fixed on wall including PVC insulated unsheathed multistranded copper conductor of size 1.5 sq mm (FRLS) as earth continuity conductor and connecting to common earth dolly all as specified for :- Notes :- (a) Colour coding shall be followed as given below:- (i) Phase - Red (ii) Neutral - Black (iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point controlled by one switch SP one way.

One ceiling fan point controlled with one 5A switch

One exhaust fan point controlled with one 5A switch

One 3 pin socket outlet 5Amps on independant board.

S&F Modular type, electronic fan regulator ( 5 step ), 120 Watts, 230 volts, 2 module

S&F Modular Switch , 6Amp, One way, 1 module.

Supply and fix support function blank plate single, 1 module complete all as specified and as directed by Engr-In-Charge.

M&L for point wiring complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic casing and capping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly. Make of casing capping : Presto Plast./ Supreme

S&F Modular Switch , 16Amp, One way, 1 module.

S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified.

S&F Modular Socket oulet, 6/ 16 Amps, 2/3 pin combined 2 module.

S&F Modular metal flush box 3 module.

S&F Modular metal flush box 4 module.

S&F Modular metal flush box 6 module.

S&F Modular metal flush box 8 module.

S&F Modular metal flush box 12 module

S&F Modular white cover plate with Frame 3 Module.

S&F Modular white cover plate with Frame 4 Module.

S&F Modular white cover plate with Frame 6 Module.

S&F Modular white cover plate with Frame 8 Module.

S&F Modular white cover plate with Frame 12 Module.

S&F MCB, DB, SPN 8 way double door with protection type IP-42 with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size , of make Siemens or equivalent in GE/Legrand

MCB SPN 63 Amps, 240 Volts - 01 Nos

MCB SP 6-32 Amps, 240 Volts - 6 Nos

S &F in repair 45 watt LED new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting Source and LENs embedded toughned glass cover with IP66 Protection and impact resistance of IK07 complete all as specified and as directed by Engr-In-Charge.

S&F in repair baton intergrated LED channel 1x18 Watt accessories internall prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-In-Charge.

S&F in repair baton intergrated LED channel 1x10 Watt accessories internall prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-In-Charge.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty)1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core complete all as specified and as directed by Engr-In-Charge.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as specified and as directed by Engr-In-Charge. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as specified and as directed by Engr-In-Charge. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

ASHOK CONSTRUCTION

BOB ENTERPRISES

Unity Enterprises

Garima Construction Co

SHREE JAGDISH FURNITURE CO.