Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 CrAdmitted-Finance | ₹2.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.7 Cr+₹48.4 L (22.1%)Admitted-Finance 11TH FLOOR ECO CENTRE BUSINESS TOWER P NO 4 EM BLOCK SECTOR V KOLKATA 91 | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700091 | ₹2.7 Cr+₹48.4 L (22.1%) | L2 | Admitted-Finance |
| 3 | L3₹3.3 Cr+₹1.1 Cr (48.8%)Admitted-Finance | ₹3.3 Cr+₹1.1 Cr (48.8%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | BRITE INDUSTRIES L1 | M/s Associated Engineers L3 | Bluestar Limited L2 |
|---|---|---|---|---|---|---|
| 1.00 | Screw Chiller: Design, manufacturing, shop testing, supply, installation, testing and commissioning of water cooled 300 TR capacity dual compressor screw chiller complete with condenser, evaporator, microprocessor based control panel, compressor, compressor motor, motor starter with MCCB etc. as per technical specification
(This item includes buyback of 02 nos. Bluestar make old screw chillers. Please quote final rate after deducting the market value of old chillers.) | 1 | Set | 57,79,000 ₹57,79,000 Lowest | 70,00,000 ₹70,00,000 | 63,13,287 ₹63,13,287 |
| 2.00 | Cooling Tower: Supply, installation, testing & commissioning of induced draft counter flow FRP cooling towers, Flow - 240 m³/hr & Range - 5°C, complete with FRP sump and panels for casing, PVC fills, PVC eliminators, sprinkler, fan, motor, drain, over flow, make-up water connection with float valve etc as per technical specification | 2 | Set | 7,15,000 ₹14,30,000 | 7,80,000 ₹15,60,000 | 6,15,159 ₹12,30,318 Lowest |
| 3.00 | Cooling Tower: Coversion of existing Advance make cooling tower model no. 1KR 189 from belt driven to direct driven with supply of all necessary accessories/ parts, testing & commissioning as per technical specification | 2 | Job | 5,75,000 ₹11,50,000 | 5,00,000 ₹10,00,000 | 3,09,078 ₹6,18,156 Lowest |
| 4.00Pump Set: Supply, installation, testing & commissioning of horizontal split casing centrifugal pump along with suitable rating motor, base frame, etc as per technical specification | ||||||
| 4.10 | Condenser water pump: Flow - 240 m³/h, Head - 30 m wc as per specification | 2 | Set | 3,85,000 ₹7,70,000 Lowest | 6,50,000 ₹13,00,000 | 4,01,296 ₹8,02,592 |
| 4.20 | Chilled water booster pump: Flow - 280 m³/h, Head, - 27 m wc as per specification | 1 | Set | 3,65,000 ₹3,65,000 Lowest | 6,50,000 ₹6,50,000 | 4,35,314 ₹4,35,314 |
| 5.00Pump Set: Dismantling from existing foundation, installation at new foundation, testing & commissioning of existing horizontal split casing centrifugal pump along with motor, base frame, etc as per technical specification | ||||||
| 5.10 | Condenser water pump: Flow - 380 m³/h, Head - 30 m wc, Motor capacity - 60 HP as per specification; | 2 | Job | 25,000 ₹50,000 Lowest | 1,10,000 ₹2,20,000 | 56,700 ₹1,13,400 |
| 5.20 | Chilled water booster pump: Flow - 120 m³/h, Head, - 25 m wc, Motor capacity - 25 HP as per specification | 3 | Job | 25,000 ₹75,000 Lowest | 90,000 ₹2,70,000 | 45,126 ₹1,35,378 |
| 6.00 | Pump Set: Replacement of impeller, shaft sleeve, mechanical seal, other consumables etc., testing & commissioning of existing horizontal split casing Kirloskar make centrifugal pump as per technical specification | 2 | Job | 1,35,000 ₹2,70,000 Lowest | 1,75,000 ₹3,50,000 | 1,87,910 ₹3,75,820 |
Tender Value
₹2.8 Cr
EMD Value
₹6.6 L
Closing Date
14 Nov 2024, 6:00 pmClosed
CE and Head, Centralised Services Section
CE and Head, Centralised Services Section, BARC, Trombay, Mumbai-400085
Augmentation of high side air-conditioning system at BARC Hospital, Anushakti Nagar, Mumbai - 400 094
2024_BARC_831823_1
BARC/CSS/ET/30/2024-2025
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
365 days
BARC Hospital, Anushaktinagar, Mumbai
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹6.6 L
BARC Hospital, Anushakti Nagar
12 Dec 2024
22 Oct 2024
19 Nov 2024
23 Oct 2024
14 Nov 2024
28 Oct 2024
23 Oct 2024 - 7 Nov 2024
5 Nov 2024
Amount
Screw Chiller: Design, manufacturing, shop testing, supply, installation, testing and commissioning of water cooled 300 TR capacity dual compressor screw chiller complete with condenser, evaporator, microprocessor based control panel, compressor, compressor motor, motor starter with MCCB etc. as per technical specification (This item includes buyback of 02 nos. Bluestar make old screw chillers. Please quote final rate after deducting the market value of old chillers.)
Cooling Tower: Supply, installation, testing & commissioning of induced draft counter flow FRP cooling towers, Flow - 240 m³/hr & Range - 5°C, complete with FRP sump and panels for casing, PVC fills, PVC eliminators, sprinkler, fan, motor, drain, over flow, make-up water connection with float valve etc as per technical specification
Cooling Tower: Coversion of existing Advance make cooling tower model no. 1KR 189 from belt driven to direct driven with supply of all necessary accessories/ parts, testing & commissioning as per technical specification
Pump Set: Supply, installation, testing & commissioning of horizontal split casing centrifugal pump along with suitable rating motor, base frame, etc as per technical specification
Condenser water pump: Flow - 240 m³/h, Head - 30 m wc as per specification
Chilled water booster pump: Flow - 280 m³/h, Head, - 27 m wc as per specification
Pump Set: Dismantling from existing foundation, installation at new foundation, testing & commissioning of existing horizontal split casing centrifugal pump along with motor, base frame, etc as per technical specification
Condenser water pump: Flow - 380 m³/h, Head - 30 m wc, Motor capacity - 60 HP as per specification;
Chilled water booster pump: Flow - 120 m³/h, Head, - 25 m wc, Motor capacity - 25 HP as per specification
Pump Set: Replacement of impeller, shaft sleeve, mechanical seal, other consumables etc., testing & commissioning of existing horizontal split casing Kirloskar make centrifugal pump as per technical specification
Piping: Supply, Installation & Testing of ERW hot-dip galvanized GI piping (as per IS 1239 & IS 3589) incuding all required accessories like flanges, counter flanges, elbows, reducers, end cap, GI nut-bolts, gaskets, etc as per drawing & technical specification:
355.6 mm OD & 8 mm thickness - Installation & testing only
219.1 mm OD & 6.3 mm thickness - Supply only
219.1 mm OD & 6.3 mm thickness - Installation & testing only
150 NB Heavy class - Supply only
150 NB Heavy class - Installation & testing only
50 NB Heavy class - Supply only
50 NB Heavy class - Installation & testing only
Electromagnetic flow meter: Supply, Installation, Testing & Commissioning of 200 NB electromagnetic flow meter of following sizes along with counter flanges, nut bolts, washer, gasket, etc as per technical specification:
Butterfly valve: Supply & installation of butterfly valves of following sizes along with flanges, nut bolts, washer, etc as per technical specification:
200 NB motorised butterfly valve with actuator
200 NB manually operated butterfly valve
200 NB manually operated butterfly valve - only installation
150 NB manually operated butterfly valve - only installation
100 NB manually operated butterfly valve - only installation
50 NB manually operated butterfly valve - only installation
Globe valve: SITC of 200 NB cast iron rising stem globe valve for flow control of following sizes along with counter flanges, nut bolts, washer, gasket, etc as per technical specification:
Check valve: SITC of cast iron dual plate wafer typee check valve of following sizes along with counter flanges, nut bolts, washer, gasket, etc as per technical specification:
Y-strainer: SITC of cast iron Y-strainer of following sizes along with counter flanges, nut bolts, washer, gasket, etc as per technical specification:
Insulation: Supply & application of Close cell nitrile rubber insulation of following sizes as per technical specification:
9 mm thick
19 mm thick
Cladding: Supply & application of 380 GSM non metallic multi layered laminate of polymeric material reinforced with scrim as per technical specification
Painting: Painting of pipeline/ structures of various sizes with two coats of etch primer & two coats of synthetic enamel paint after thorough cleaning of pipe as per technical specification
Ball valve: SITC of DN20 SS304 ball valve in single piece design for air release & drain as per technical specification
Pressure gauge: SITC of SS body 100 mm dia glycerin filled dial type pressure gauge 0-10 kg pressure range with SS syphon tube & SS needle valve as per technical specification
Differential Pressure Transmitter: SITC of differential pressure transmitter suitable for chilled water application as per technical specification
Fan coil unit: Supply, installation, testing & commissioning of high wall type fan coil unit of 2 TR nominal capacity along with automatic flow control valve & y-strainer as per technical specification
FRP Lining: Carrying out FRP lining work in 3 layers over cooling tower structure (MS plate) as per technical specification
Stuctural steel: Supply, fabrication & installation of structural steel supports (material carbon steel) for cooilng tower structure & supporting of various equipments as per technical specification
Stuctural steel: Supply, fabrication & installation of structural steel supports, pipe fittings, elbows, reducers, end cap, flanges, nut-bolts etc. (material galvanized steel) for supporting of various equipments & installation of pipelines, valves etc. as per technical specification
Dismantling of 150 TR screw chiller along with butterfly valves, globe valves, strainers & flow meters
Dismantling of 110 TR screw chiller along with butterfly valves, globe valves, strainers & flow meters
Dismantling of 200 TR induced draft cooling tower along with butterfly valves
Dismantling of centrifugal pumps of flow range 80 to 114 m³/h & motor capacity 15 HP to 25 HP along with butterfly valves, pot stariners & non-return valves
Dismantling of chilled water & condenser water piping of follwing sizes & shifting the same to scrap yard along with support:
100 NB to 150 NB
200 NB to 250 NB
300 NB to 350 NB
MCC Panel: Supply, installation, testing and commissioning of VFD based MCC Panel as per technical specification
Distribution Panel: Supply, installation, testing and commissioning of outdoor distribution panel as per technical specification
Supply, installation, testing and commissioning of outdoor type emergency push button in MS Box as per technical specification
Supply, installation, testing and commissioning of 1.1 kV 3.5C x 300 Sq. mm Aluminium conductor, XLPE insulated, armoured, FRLS cable on surface as per technical specification
Supply, installation, testing and commissioning of 1.1 kV 4C x 25 Sq. mm copper conductor, XLPE insulated, armoured, FRLS cable as per technical specification
Surface laying
Underground laying
Supply, installation, testing and commissioning of 1.1 kV 4C x 16 Sq. mm copper conductor, XLPE insulated, armoured, FRLS cable as per technical specification
Surface laying
Underground laying
Supply, installation, testing and commissioning of 1.1 kV 4C x 2.5 Sq. mm copper conductor, XLPE insulated, armoured, FRLS cable as per technical specification
Surface laying
Underground laying
Supply, installation, testing and commissioning of 1.1 kV 4C x 1.5 Sq. mm copper conductor, XLPE insulated, armoured, FRLS cable on surface as per technical specification
End termination of following cables as per technical specification
1.1 kV 3.5C x 400 Sq. mm Aluminium conductor, XLPE insulated, armoured, FRLS cable
1.1 kV 3.5C x 300 Sq. mm Aluminium conductor, XLPE insulated, armoured, FRLS cable
1.1 kV 3.5C x 25 Sq. mm copper conductor, XLPE insulated, armoured, FRLS cable
1.1 kV 4C x 16 Sq. mm copper conductor, XLPE insulated, armoured, FRLS cable
1.1 kV 4C x 2.5 Sq. mm copper conductor, XLPE insulated, armoured, FRLS cable
1.1 kV 4C x 1.5 Sq. mm copper conductor, XLPE insulated, armoured, FRLS cable
Modification of starter feeder as per technical specification
Removal of following size cables as per technical specification
Up to 6 sq.mm
Above 6 sq.mm and up to 25 sq.mm
Above 25 sq.mm and up to 240 sq.mm
Above 240 sq.mm and up to 400 sq.mm
Only installation of 1.1 kV 3.5C x 400 Sq. mm Aluminium conductor, XLPE insulated, armoured, FRLS cable in cable tray, trenches, wall etc as per technical specification
Supply, installation, testing and commissioning 20 A metal single phase metal clad socket and three pin top with 20A DP MCB in MS box for geyser/Heater as per technical specification
Supply, installation, testing and commissioning of three phase 32A Metal clad socket and top with 32 A 4P MCB In MS box as per technical specification
Supply, installation, testing and commissioning of 20 W outdoor LED lighting fixture as per technical specification
SITC of signal isolator with dual output as per technical specification
Supply, installation, testing and commissioning of outdoor junction box as per technical specification
Dismantling of MCC panels as per technical specification
Installation of cable tray as per following sizes and technical specification
300 mm cable tray
150 mm cable tray
RCC Hume pipe - Supply. installation, following 250 mm RCC hume pipe as per specification corresponding to Specification Schedule.
Excavation for cable laying - Excavation for cable laying and other works as per technical specification
Excavation in Soft soil
Excavation for Hard rock/road
MS Box: Supply & installation of MS boxes fabricated out of MS sheets as per technical specification
Earthing stations: Supply, installation, testing and commissioning of earthing station consisting of 600 x 600 x 3.15 mm thick tinned copper earth plate, GI pipe, funnel, masonary chamber etc as per tender technical specification
Earthing Conductor: Supply and installation of bare copper earth strip/wire of following sizes to be installed in trenches, ground, wall, RCC, slab, above false ceiling, trenches etc. as per tender technical specification
25x3 mm tinned copper strip
8 SWG Copper wire
Bluestar Limited (BID ID -3120501)
M/s Associated Engineers (BID ID -3119799)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 8.42 MB
Tendernotice_2.pdf
PDF • 7.66 MB
TechnicalSpecification30.pdf
Tender Documents • 1.01 MB
Tenderdocument30.pdf
Tender Documents • 1.17 MB
TECHNICALBID30.xls
Tender Documents • 0.17 MB
BOQ_874091.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .