PROVN OF ROAD IN RANJIT LINE AND SPECIAL REPAIR TO ROADS IN PR LINE AT MIRAN SAHIB UNDER GE JAMMU

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces, exc 50 mm and n exc 100 mm deep in area not exc 400 sqm, complete all as specified and as directed.

Removal of excavated material n.exc 50 mtr and depositing where directed at level not exc 1.5 m from starting point..

150 mm thick (compacted thickness) WBM in two layer of 75mm (compacted thickness & each layer to be rolled and consolidated separately), with granite, trap or basalt coarse aggregate of grading 2(63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller, complete all as specified.

Preparing un surfaced water bound macadum surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Paving Bitumen of Viscosity Grade VG-30) at the rate of 10 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5 % binder content by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 10 tonne power roller, complete all as specified and as directed. Note:-The minimum consolidated thickness will be 40mm. However it may be increased at places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting their rates.

Marking lines, dashes, arrows and the like etc of any description exc 10cm width/girth with road marking paint white or golden yellow with adequate No of coats, complete all as specified and directed.

Supply and fixing Road Stud/ cat eye of size110mm x 128mm x 29.5 mm made out from aluminium alloy die casted dynamically designed very high impact strength and fitted with 02 Nos highly reflective reflectors & 02 Nos eye balls each on both side, complete all as specified and directed. Model : No- DA 971 of Dark Eye or equivalent in Greenlite/Road star / Gogia plastics.

100 mm thick Moorum/red bajri filling in floors or pavings, spread, levelled and rammed including watering spreading, levelling, watering and well ramming with roller finishing to required gradient and camber, complete all as specified and directed.

Continuous brick edging with width equal to the width of brick of sub class B, old size brick (crushing strength 75 Kg/Sqm) laid dry on ends vertically including necessary excavation and earth works and tamping ground around brick in any type of soil and removal of surplus soil etc to a distance not exceeding 50 mtr complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out any type of soil, complete all as specified.

Rolling and consolidation to formation surface in cutting or in embanlment using power roller 8 to 12 tonne including watering, filling in depression which occur during rolling, complete all as specified.

Soling (or sub base) 150 mm thick (spread thickness) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller, complete all as specified.

Precast cement concrete block 1:2:4 Type B-1 (using 20mm graded crushed stone aggregates) as in kerb stone with plain fair faces including chamfers, weathering, throating etc and set in CM (1:4) complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and directed.

Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surface, complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surface, complete all as specified and directed.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Sarbat Construction Co