PROVN OF SECURITY LIGHTS/SEARCH LIGHTS FOR GD POSTS AND TARMAC, ELECTRIC GEYSERS IN SMQs OF RANGE AREA (PH-II) AND SPECIAL REPAIRS TO EARTHING PITS FOR OMQs/SMQs AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

Amount

Excavation in trenches in Soft /Loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 M in depth for laying of cables/ pole and getting out of excavated material complete all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 Cm thick each, excavated soil in trenches after the pipe/ cable have been laid and tested complete as specified and as directed.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point and all as specified and as directed.

Supply and spreading fine river sand in trenches for cushioning of under ground cable / filling of cable ducts all as specified and as directed by Engineer - in -Charge at site. (Note: The punned down thickness shall only be measured)

Supply and laying well burnt brick, sub class 'B' of size 230 x 115x 75mm D18 laid across trenches for protection to cable all as specified and directed.

Supply and laying LT UG XLPE insulated of size 50 Sqmm 3.5 core 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs complete all as specified and directed.

Supply and laying LT UG XLPE insulated of size 16 Sqmm 4 core 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs complete all as specified and directed.

Supply and laying LT UG XLPE insulated of size 35 Sqmm 3.5 core 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs complete all as specified and directed.

Supply, Installation, Testing and Commissioning of Integral LED Street light Luminarie 90 Watt LED Street light made up of pressure die cast aluminium housing with integrated polycarbonate lens, high power ceramic LEDs with IP 66 protection, 100LM/W Heat resistant toughened glass is provided with die cast aluminium frame provided with a mounting bracket for aiming adjustment and power factor 0.90 all as specified and directed by Engr-in-charge . Make Havells/ Crompton/Phillips/Syska

Supply, Installation, Testing and Commissioning of Integral LED Flood luminarie 400 Watt LED Termac light made up of pressure die cast aluminium housing with integrated polycarbonate lens, high powerceramic LEDs with IP 66 Protection, 10 KV SPD included efficiency 110LM/W Heat resistant toughened glass is provided with die cast aluminium frame provided with a mounting bracket for aiming adjustment and power factor 0.90 all as specified and directed by Engr-in-Charge. Make : Pyrotech Electronics (P)/ Sapphire Lumen Tech or equivalent in Havells and Crompton

Supply, Installation, Testing and Commissioning of Integral LED Search ligh luminarie 150W LED with lens white mounted on Teliscopic Mast with mobile stand street light made up of pressure die cast aluminium housing with Integrated polycarbonate lens, high power ceramic LEDs with IP66 protection, 10 KV SPD included efficiancy 110 LM/W Heat resistant thoughened glass is provided with die cast aluminium frame provided with a mounting bracket for aiming adjustment and power factor 0.90 all as specified and directed by Engr-in-Charge Make : Pyrotech Electronics (P)/ Sapphire Lumen Tech or equivalent in Havells and Crompton

Supply & errect steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts & screws as specified type 410 SP 31 (9.00 mtr long) including painting of poles with two coats of aluminium paint over a coat of red oxide primer on all exposed surfaces and black bituminous paint on embedded portion complete all as specified and directed.

Supply and Fixing Pole mounting junction Box (Looping Box) for street light for 3 Phase 4 Wire system with internal size 250 x 200 x 100 mm comprising of PVC connection and one MCB 6Amps including Mounting arrangment . Make Sintex /Havells /Spelsbary

Supply and fix bracket suitable for mounting light / LED street light fittings of Single Arm 1.50 meter made out of GI pipe fixing 32mm dia light grade complete with clamps and all fittings including fix to the wall complete all as specified and as directed.

Supply and Fixing Bus Bar Chamber 63 Amps 4 Way for Termaric light for 3 Phase 4 Wire system complete including mounting arrrengement and connections of cable all as specified and directed . Make : Havels Cat Part No -IHBC006304 or equivalent in L&T and Legrand

Supply and fix 3 Core 1.5 Sqmm PVC insulated PVC sheathed weather proof multistranded copper conductor cable 1100 volts grade drawn through in GI conduit , pole etc from junction box to street light fitting all as specified and directed. Note:- Only copper conductor measured under this item.

Supply and fixing GI pipe light grade with necessary fittings in Floor/Piller/Fixed on pole of size 40mm dia complete all as specified

M&L for cutting of PCC / Hard standing /WBM road not exceeding 20 cm in width not exceeding 30cm in depth for passing LT cable and making good of disturbed surface with filling hardcore 40 mm graded aggregate and PCC 1:3:6 type C1 for top 15 cm depthcomplete all as specified and directed

M&L for writing pole No with letters of size 50mm height on pole /plate with Black synthetic enamelled paint complete all as specified and directed by Engineer -in-Charge

M&L for PCC 1:4:8 D2 (using 40mm graded crushed aggregate) as in mass concrete for foundation filling of Pole, Stay including necessary form work all as specified and directed

M&L for PCC 1:3:6 C2 (using 40mm graded crushed aggregate) as in mass concrete for foundation filling of Pole, Stay including necessary form work all as specified and directed

M&L for cement concrete (1:2:4) type B1 with 20 mm graded aggegate for coping including form work and finishing to all exposed surfaces by using extra cement all as directed.

M&L for rendering 10mm thick on fair face of brick work or concrete surface in cement plaster 1:4

Supply & Fix GI tube galvanised light grade 15mm size with all fitting complete to wall / ceilling or laid on floor and suitable size of clamps minimum 2 Nos per pole with nut & bolts all as specified and directed.

Supply and installation on LT Electric Control Panel, cubical type, for Out door use Floor mounted made out of CRCA outer sheet of 3 mm thick and inner sheet of 2 mm thick and angle iron legs of size 40mm x 40mm x 5mm having front and rear open hinged doors with front openable shutter for each MCCB / Timer with spreader compartment withfully enclosed bus bar chamber, having insulated busbar made out of aluminium strips of rating 150 Amps for 3 Phase , 415 Volts,50 Hz , 4 Wire system, with cable entry provision with suitable lugs , gland, Voltmeter, Ammeter, CTs and Phase indicator complete , duly painted with two coats of stove enameled powder coated paint over as coat of red oxide primer complete and nut, bolts, washers for connection of cable, including necessary PCC work of height 45 cm from ground level and white washing to the platform all as specified and equipped with the following items : (Loc perimeter ) Make of MCCB : Legrand, Siemens, Schneider, Havells, L&T

Supply and fixing for GI Wire 4 mm on wall / batten or recessed or buried in ground all as directed

M&L sub main wiring with two runs of single core 4 Sqmm multi stranded copper conductor PVC insulated unsheathed, FRLS Cable, 1100 Volts grade and one run of 4 Sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non metalic ridig surface / recessed PVC conduit, 25 mm dia and conduit accessories complete all as specified and as directed. Note : Two runs of wire, one run of conduit and one run of earth conductor wire shall be measured as one unit length.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps for incoming and out going control, complete all as specified and directed. Make : L&T / Legrand /ABB/ Siemens /Schnider

Supply and fix MCB SP 20 Amps, 240 Volts, 50 Hz AC supply complete all as specified and directed. Make : L&T / Legrand /ABB/ Siemens /Schnider

S&F GI tubes, medium grade fixed complete to wall and ceiling or laid in floor of size 15mm with all fittings and fixing complete including necessary excavation, clips, wall hooks, wooden plugs etc and fitting with existing pipe line of any size complete all as specified

Supply and fix electric water heater, storage type ABS with SS inner tank and heating element upto 2 KW capacity 25 ltrs, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, Connection pipe etc. Make: Bajaj/ Orient/ Khaitan/ Havells

Supply and fix 15mm bore stop valve fancy type, chorimum plated down high pressure, with or without leetterd Hot or Cold , screwed for 15mm , iron pipe all as specified and as directed. Make : Prayag/ ESSCO/Soma/Leader/Zoloto

Supply and fix, fancy type, 15mm bore chromium plated bib taps, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for bass ferrule, fancy type all as specified and as directed. Make : Prayag/ESSCO/Soma/Leader/Zoloto

S&F PVC connection pipe of size 15 x 450mm complete with PTMT nuts for hot /cold water complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mmx 600mm x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal gound level, earth plate shall be connected with double bolts, nuts, check nuts & washers, to & including 4 mm galvanised iron wire as earth lead, extended upto 7.5 m or upto test terminal point, drawn through 40mm dia med grade GI Pipe for protection of galvanised iron strip in the ground further connecting with GI wire 4mm dia to Distribution board, including excavation, earth work, charcoal, Magnesium sulphate 50 Kg, Bentonite 25 Kg, PCC Chamber, RCC Cover slab, watering pipe 20mm dia bore med grade wire net, funnel etc & testing on completion all as specified in plate No 3 of SSR Pt-I including taking down old u/s earthing . Note . (a) GI Pipe for protection of earthing wire and earth strip beyond 7.5 mtr or test point shall be measured and paid seperately under relevant items.

M&L for GI wire 4mm dia as earth continuity wire.

S&F GI Pipe light Grade and of 15mm dia including GI tee, bends, sockets, unions etc complete all as specified and as directed by Engineer-in-Charge.

K LAKSHMAN SINGH AND CO

SRI SAI RAM ENTERPRISES

BEEGEE DESIGN SYSTEMS

Venkat Sai Enterprises