REPAIR AND MAINT OF MISC FURNITURE AT AIR FORCE STATION JAISALMER

Amount

Repair to Chair Dining (Drg No: FD-228, 270, 279 & 285)

M&L for removing of old broken components of chair dinning and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in the drawing.

Rear leg as specified in the drawing.

Stiffener as specified in the drawing.

Front/Side/Rear rails of seat including drilling of holes for caning as specified in drawing

Back support as specified in the drawing.

S&F new Hard PVC shoe with screw & washer complete all as specified.

S&F new Hard PVC sheet of chair as specifed in drg FD/Map-II/05

Plywood 6 mm thick BWR grade as per Drg No. FD-285

Repair to Chair Writing (Drg No. FD-280)

M&L for removing of old broken components of chair writing and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in the drawing.

Rear leg as specified in the drawing.

Stiffener as specified in the drawing.

Front/back/side rail as specified in the drawing.

Arms as specified in the drawing.

Back support as specified in the drawing.

S&F new hard PVC shoe with screw & washer complete all as specified.

Repair to Chair Easy (Drg No. : FD-229)

M&L for removing of old broken components of chair easy and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Front/Rear leg as specified in the drawing.

Seat frame as specified in the drawing.

Frant/back/Side rail as specified in the drawing.

Arms as specified in the drawing.

Back frame/support as specified in the drawing.

S&F new hard PVC shoe with screw & washer complete all as specified.

Repair to Chair Dining Officer (Drg No: FD/Map-II/04 & FD/E6/MAP-10)

Removing of old U/S part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge:-

Front leg as specified in the drawing.

Rear leg as specified in the drawing.

Stiffener as specified in the drawing.

Front/back/side rail as specified in the drawing.

Plywood 12mm thick commercial BWR grade ply as specified in the drawing.

Back support as specified in the drawing.

S&F new hard PVC shoe with screw & washer complete all as specified.

New cushion 75mm thick 40 density duly stiched cover of approved colour and quality

TABLE PEG (Drg No: FD-277 & 384)

Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed .

Leg as specified in the drawing.

Front rail as specified in the drawing.

Side stiffeners as specified in the drawing.

S&F new ‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

S&F new PVC Shoes (4 nos in one peg table will be counted as one unit)

TABLE CENTRE (Drg No: FD-267, 274 & 393)

M&L for removing of old broken components of table centre and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Leg as specified in the drawing.

Front/Rear rail as specified in the drawing.

Side rail as specified in the drawing.

Side Stiffener as specified in the drawing.

Long Stiffener as specified in the drawing.

S&F new ‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

S&F new PVC Shoes (4 nos in one table will be counted as one unit)

TEA POY WOODEN (Drg No: FD-278 & 382) M&L for removing of old broken components of tea poy and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Leg as specified in the drawing.

Side rail as specified in the drawing.

Front/back rail as specified in the drawing.

S&F new ‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

S&F new PVC Shoes (4 nos in one table will be counted as one unit)

TABLE 900X600X760MM WITH DRAWERS (Drg No: FD-283 & 284)

Removing of old U/S part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

Leg as specified in the drawing.

Front/Rear rail as specified in the drawing.

Side rail as specified in the drawing.

Middle stiffeners as specified in the drawing.

Side stiffeners as specified in the drawing.

Drawers unit of size 550mm x 310mm x 6mm including side members as specified in the drawing.

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

Knob decorative of size 40mm complete all as specified in the drawing.

TABLE DINNING 4/6/8 PERSONS (Drg No: FD-269, 273 & FD/Map-II/03)

Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in Drg and directed by Engr-in-charge.

Front/back rail of table dining 4 person as specified in the drg

Front/back rail of table dining 6 person as specified in the drg

Front/back rail of table dining 8 person as specified in the drg

Side rail as specified in the drawing.

Leg as specified in the drawing.

S&F new ‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

TABLE WRITING (Drg No: FD-249 & 275)

Removing of old U/S part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engineer-in-charge.

Leg as specified in the drawing.

Front/ back rail as specified in the drawing.

Side box with front door and drawer made of 17/18mm thick prelaminated particle board as specified in drg

Back ply box 6mm thick commercial ply (ISI marked)

Front door 18mm pre-laminated particle board including knob and hinges piano type continuous.

Recanning description: M&L Re-canning with plastic cane of ½ round 2.0mm wide & 0.40mm thick, woven in Godrej pattern and border around and back with 4mm wide of approved quality (white/cream in colour) including removing of old unserviceable canning as specified.

Chair dining as specified in the drawing (FD-228, 262, 270 & 279).

Chair writing as specified in the drawing (FD-280).

Chair easy seat & back as specified in the drawing (FD-201 & 229).

SOFA SET 3/4/5 PERS/SEATERS WOODEN (Drg No: FD-373 & 281) M&L for taking out old unserviceable component and S&F new component made of 1st class hard wood (teak), free from knots and cracks with permissible moisture content and of shape/ size existing complete all as specified in drawing and as directed

Front legs as shown in drg

Rear leg as shown in drawing.

Arm as shown in drawing.

Rront/Side/Rear rail of sofa single seater as shown in drawing.

Front/Rear rail of sofa set, three seater, as shown in drawing.

Back/ seat frame support for sofa set of three seater including battens/ply

Back/ seat frame support of sofa single seater including battens/ply

M&L for taking out old unserviceable seat or back and S&F new seat or back of foam cushion of size 530x560x100mm 32-density duly covered with marking cloth and tapestry cloth of approved quality duly stiched with chain complete all as specified in drawing and as directed. Note : Cost of Tapestry cloth shall not be less than Rs. 200/-per meter.

TABLE BED SIDE (Drg No: FD-248, 276, FD/E6/MAP/15) Removing of unserviceable part of furniture and supply and fixing new part to match with existing parts to make it serviceable complete all as specified and directed and shown in drawings.

Top/middle/bottom shelf with polished beading as specified in drawing.

Sides pane including legs with polished beading edges as specified in the drawing.

Back ply 6 mm thick commercial as specified in the drawing.

Replacement of drawer channel

S&F new SS handle 100mm with screw and washer as specified in drg

SIDE BOARD, Bin Multipurpose ( Drg No :FD/E6/MAP/09, FD-241, 371 & 372) Removing of unserviceable part of furniture and supply and fixing new part to match with existing parts to make it serviceable complete all as specified and directed and shown in drawings.

Back ply 6mm thick commercial as specified in the drawing.

Shutter fixed with piano type hinges continuous 20mm as specified in the drawing.

Knobs 50mm as specified in the drawing.

S&F new SS handle 100mm with screw and washer as specified in drg

Top base as specified in the drawing.

Bottom base as specified in the drawing.

Sides pane as specified in the drawing.

Repair to Bed ply top (Drg No: FD-246 & 247)

M&L for taking down old unserviceable ply from bed ply top and S&F new bed ply 12mm thick 1980x900mm size (BWR) grade type 'B' complete all as specified and shown in drawings.

M&L for taking down old unserviceable long rails of bed ply top and S&F new long rail of size 1980x90x35mm of 1st class seasoned teak wood free from knots and cracks with permissible moisture content complete all as specified and as shown in drawings.

Short rail of size 900x60x60mm size complete all as specified and as shown in drawings.

Stiffener of size 900x60x40mm size complete all as specified and as shown in drawings

Foot rest assembly alongwith legs as per existing size and as shown in drawings.

Head rest assembly alongwith legs as per existing size and as shown in drawings.

TABLE DRESSING LADIES WITH MIRROR (Drg No: FD-251, 378 & FD/E6/MAP/16)

Removing of unserviceable part of furniture and supply and fixing new part to match with existing parts to make it serviceable complete all as specified and directed and shown in drawings.

S&F new SS handle 100mm with screw and washer as specified in drg.

Removing existing U/S bottom box of table dressing ladies and S/F new box with drawers as specified in Drawing.

Removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.0 mm thick of clear vision with 6mm thick ply fixed at back and legs of mirror frame as specified in Drawing.

TABLE DRESSING GENTS WITH MIRROR (Drg No: FD-230 & 379)

Removing of old unserviceable part of furniture and supply and fixing new part to match with existing parts to make it serviceable complete all as specified and directed by Engineer-in-Charge.

Back ply of box as specified in the drawing.

Knobs 50mm of chromium plated and standard quality as specified in the drawing.

Removing existing U/S bottom box of table dressing gents and S/F new box with drawers as specified in Drawing.

Removing existing U/S mirror with ply and S/F new mirror 5.5 mm thick of clear vision with 6mm ply on back and legs of mirror frame as per drg

Polishing description: M&L preparation of wooden surfaces by cleaning, scrapping through electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying French polish to get the glossy finish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture as specified.

Chair Dining (FD-228, 262, 270, 279 & 285)

Chair writing (FD-280)

Chair Easy (FD-201 & 229)

Table Peg (FD-277 & 384)

Table Centre (FD-274, 267 & 393)

Teapoy wooden (FD-278 & 382)

Table 3'x2' with drawer (FD-283)

Table 3'x2' without drawer (FD-284)

Table dining 4’ x 3’ (FD/MAP-II/03)

Table dining 6 person (FD-269, 273 & FD/MAP-II/03)

Table dining 8 person (FD-273 & FD/MAP-II/03)

Table writing (FD-249 & 275)

Sofa set 5 seater (FD-281, 373 & FD/MAP-II/02)

Sofa single seater (FD-281, 373 & FD/MAP-II/02)

Table 3x3 wooden (FD-88 & 291)

Bed with plytop (FD-246 & 247)

Table dressing (Ladies) (FD-251, 378 & FD/E6/MAP/16)

Table dressing gents (FD-230, 379 & FD/E6/MAP/14)

Hat Stand with Mirror (FD-233 & 362)

Repairs to Bed & Charpoy Bed Hard Steel, Charpoy IP Hard Top, Charpoy Folding Hard Top { Drg No. FD/E6/MAP/08, FD/MAP-II/01, FD-388 ( R) }

M&L for removing of old unserviceable ply wood of Bed Hard Steel and S&F new BWR grade, phenol bounded, commercial plywood with the help of nut, bolts including suitable washer as per drg and directed. Drg- FD/E6/MAP/08

All as per Serial Item No. 19.01 above but Charpoy IP hardtop.FD/MAP-II/01

All as per Serial Item No. 19.01 above but Charpoy Folding with Hard Top.FD-388 (R)

S&F PVC/Rubber shoe of Bed hard steel as per drg FD/E6/MAP/08

S&F PVC/Rubber shoe of Charpoy IP hard top as per drg FD/MAP-II/01

S&F PVC/Rubber shoe of Charpoy IP folding as per drg FD-388 (R)

S&F in replacement pre laminated particle board from the Head Rest and Foot Rest assembly of Bed Hard Steel. FD/E6/MAP/08

M&L for welding all around the broken joints of all type of steel furniture and filling properly at places of welding point throughout to match with the existing as directed. Note: One broken point shall be measured as one point i.e. one unit.

Repairs to Almirah Large Steel and Almirah Medium Steel (Drg No. FD-1031,1032)

M&L for removing old unserviceable existing handle and S&F new chromium plated handles including necessary nut, bolts, washer etc for Almirah Large Steel/ Almirah Medium Steel.

M&L for removing existing shelves and making the same in functioning condition including necessary nuts, bolts, clits and washer etc of Almirah Large Steel/ Almirah Medium Steel all as directed.

M&L for removing old unserviceable leg of Almirah Large Steel/ Almirah Medium Steel and S&F new legs made out of 1mm MS sheet made to shape and sizes as shown on drawing and directed. (Pair of two legs will be measured as one unit)

M&L for removing unserviceable lock from Almirah Medium Steel/ Almirah Large Steel and S&F new 6 lever brass lock with duplicate keys complete all as specified.

M&L for removing existing locking device with MS plate, rod of Almirah Large Steel and S&F new locking device with plate, rod complete all as directed.

All as per Serial Item No. 20.05 above but in Almirah Medium Steel.

Painting of Steel Furniture : M&L for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as per requirement :-

Almirah Large Steel with shelves both side (Drg No. FD-67,FD-1031)

Almirah Medium Steel with shelves both side (Drg No. FD-67,350,1032)

Locker Steel both side (Drg No. FD-1029)

Book case steel both side (Drg No. FD-1028)

Bed hard steel (Drg No. FD/E6/MAP/08)

Charpoy IP Hard Top. (Drg No. FD/MAP-II/01)

Charpoy Folding with Hard Top. (Drg No. FD-388 (R) )

Chair CB Steel without arms. (Drg No. FD-75M)

Chair CB steel with arms. (Drg No. FD-75M)

Form without back (steel frame only). (Drg No. FD-78M)

Table Office Officer Steel. (Drg No. FD-84,FD-1003)

Table Office Clerk Steel (Drg No. FD-84,FD-1004)

Table 3’x2’ Steel with drawer and without drawer. (Drg No. FD-1008)

Table Dining OR. (Drg No. FD-1008)

Chair Varandah white colour (Drg No. FD-359)

Teapoy Verandah white colour. (Drg No. FD-255,383)

Table 900mm x 900mm x 760mm Steel. (Drg No. FD-1009)

Chair easy steel (Drg No. FD-121)

Replacement of TOP: Taking out unserviceable top from Table and S&F new top made out of 18mm thick pre laminated partical board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Table office officer steel (Drg No. FD -1003)

Table office clerk steel. (Drg No. FD-1004)

Table of size 3’x2’ with or without drawer. (Drg No. FD-283,284,1007,1008)

Teapoy Verandah (Drg No. FD-255,383)

Table 900mm x 900mm steel (Drg No. FD-88, 291, 1009)

Table dining OR (Drg No. FD-165)

Table Peg (FD-277 & 384)

Table Centre (FD-274, 267 & 393)

Teapoy wooden (FD-278 & 382)

Table dining 4’ x 3’ (FD/MAP-II/03)

Table dining 6 person (FD-269, 273 & FD/MAP-II/03)

Table dining 8 person (FD-273 & FD/MAP-II/03)

Table writing (FD-249 & 275)

Repairs to Table Steel

M&L for removing old unserviceable lock of drawers of Table office officer steel/ Table office clerk steel and S&F new brass lock with four levers and duplicate keys. (Drg No. FD-1004,1003)

M&L for removing existing drawers of Table office officer steel/ Table office clerk steel/ Table 3' x 2' steel and re-fixing the same after necessary setting of drawers for free movement all as directed. (Drg No. FD-1004, 1003, 1008)

M&L for removnig old unserviceable drawer box of Table office clerk steel and S&F new box of three drawers made out of 1.00mm MS sheet made to shape and sizes shown on drawing all as directed. (Drg No. 1003)

M&L for removing old unserviceable channel and S&F new telescopic channel of size 10/12 inch in computer table. (Drg No. TP, FD/E6/Map/03)

M&L for taking out unserviceable Key board tray from Computer Table and S&F new Key board tray with side supports and channel with the help of L shape patti (400 x 500) on both side, made of 18 mm thick pre laminated partical board including teak wood edging 4mm, duly polished as specified in drg. (Drg No. TP, FD/E6/Map/03).

Repair to Steel Chairs

M&L for removing old unserviceable plastic cane of Chair Varandah and reweaving of Chair Verandah with new plastic cane ½ round, 4mm wide, 0.40mm thick with approved quality closely woven as per drg. (Drg No. FD-359)

S&F PVC Shoe of chair varandah

M&L for taking out old unserviceable PU handle of Chair Writing Steel and chair computer and S&F new pair of PU handles (left and right) with screw, Nut and bolts as per drg. (Drg No. FD/E6/ MAP/12 & FD/E6/MAP/01) Note: Pair of 2 handles will be counted as one unit.

M&L for removing old unserviceable Castor from the Chair Computer Revolving and S&F new castors as per drg and directed. (Drg No. FD/E6/ MAP/01)

M&L for removing old unserviceable PVC Base (5 legs) from the Chair Computer Revolving and S&F new PVC base with castors as per drg and directed. (Drg No. FD/E6/ MAP/01)

M&L for removing old unserviceable hydraulic assembly from the Chair Computer and S&F new hydraulic assembly with PVC couplings as per drg and directed. (Drg No. FD/E6/ MAP/01)

S&F new seat of chair easy steel made up of 635 x 560 x 50mm dunlop and 12mm ply on one side dull upholstered with leatherite as shown in drawing and as directed. (Drg No. FD-121M)

S&F new back of chair easy steel made up of 355 x 560 x 25mm dunlop and 12mm ply on one side dull upholstered with leatherite as shown in drawing and as directed. (Drg No. FD-121M)

M&L for removing old unserviceable tapestry from cushioned seat and back of Chair Computer, Chair Writing Steel, Visitor's Chair and S&F new tapestry cloth along with necessary inner linning and foam duly stiched as per drawing. (Drg No. FD/E6/ MAP/12, FD/E6/ MAP/01, TP)

S&F new tapestry cover for Sofa (Set of 10 covers) duly stiched with chain at bottom with superior quality colour and quality approved by GE and Engr in charge. Note : Set of 10 Covers will be counted as one unit. (Drg No. FD-281, FD/MAP-II/02)

M&L for taking out old unserviceable Seat Frame of Chair CB Steel with Arms and S&F new black painted seat frame of 2nd class hard wood, duly weaving with white or cream plastic cane ( 2mm to 2.5mm wide partially rounded off) of approved quality Godrej pattern, including fixing with MS nut and bolt with washer, cross band, border and size of seat frame as specified in drawing. (Drg No. FD-75M)

All as per Serial Item No. 24.11 above but Back Frame of Chair CB Steel with Arms. (Drg No. FD-75M)

S&F black painted hand rest of Chair CB Steel with arms size as per drg. (Drg No. FD-75M)

M&L welding of 4 nos of clits in one chair of 3mm thickness to support seat frame of Chair CBA steel with or without arms. (Drg No. FD-75M)

M&L for replacing Rubber or PVC Caps in tubes of Chair CB steel with Arms and Chair CB steel without Arms as per drg and directed. (Drg No. FD-75M)

Locker Steel (Drg No. FD-1029)

M&L for taking out old unserviceable handle of Locker Steel and S&F new chromium plated handles including necessary nut, bolts, washer etc.

M&L taking out existing shelves of Locker Steel and making the same in functioning condition including necessary nuts, bolts, clips and washer etc all as directed.

M&L taking out old unserviceable leg of Locker Steel and S&F new legs made out of 18 gauge MS sheet of shape and sizes shown on drawing and all as directed.

M&L for removing unserviceable Hasp and Staple and S&F new set of Hasp and Staple complete with screw, nut, washer etc.

S&F 20mm chromium plated steel conduit pipe along with suitable bracket

PRAFUL ENTERPRISES