Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance NOT AVAILABLE | Admitted-Finance |
| 4 | Admitted-Finance ROOM NO 997 GALI NO 3 PART NO 3 GANESH MURTHY NAGAR CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | Admitted-Finance |
| 5 | Admitted-Finance 0 0 0 NEAR DAK BUNGLOW NH 1 A NH 1A UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹69,800
Closing Date
16 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NOFRA
Dr Homi Bhabha road new navy nagar colaba
REPAIRS TO EXTERNAL SERVICES LIKE DRAINS SEWAGE COMPOUND WALL HARD STANDING IN OTM ACCN OF AGE BR II UNDER GE NW NOFRA
2023_MES_583187_1
8123
Open Tender
Civil Works
Item Rate
330 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE NW NOFRA
₹69,800
Yes
15 May 2023
27 Feb 2023
21 Mar 2023
27 Feb 2023
16 Mar 2023
11 Mar 2023
27 Feb 2023 - 10 Mar 2023
Amount
Note : Contractor has to attended daily complaint (of sewage) for particular day otherwise penality fo Rs 500/- per day will be leived on contractor.
Cleaning and desilting of sewage lines of any size any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed by Engr-in-Charge.
(a) for 150 mm dia pipe line
(b) for 200 mm dia pipe line
(Note: The above qty is considered for one year cleaning work will be done on quarterly basis as per plan given and regular complaint will be attended simultanously.
Cleaning & desilting of manholes depth not exc 1.50 mtr by pumping out/removing liquid waste/sewage & plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (silt, sludge & other waste material) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified and directed by Engr-in-Charge.
(i) For Depth not exc 1.50 m
(ii) For Depth exc 1.50m but n.exc 3.00m
(Note: The above qty is considered for one year cleaning work will be done on quarterly basis as per plan given and regular complaint will be attended simultanously.
Cleaning the chocks/blockages in AC/CI/PVC soil waste/rain water pipe of any dia by removing cleaning eye and refixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia upto ground/stilt plus seven floors and including necessary scaffolding if required.
Cleaning eye (oval access door) for bends , branches, etc of dia not exceeding 100mm at any floor level and refix the access door in same position after cleaning.
Cleaning and removal of foreign material from inside the Gully trap/WC Pan, Nahani trap, Floor trap etc including removing & re-covering of RCC/CI cover and directly buried in the ground to a distance not exc. 50 m along with spreading of bleaching powder complete one or more times all as specified and directed.
M&L for Jointing only cast iron pipes and fittings AC pipes in repair with cement joints for pipes 100mm dia upto ground/stilt plus 7th floors, complete all as specified.
All as per item No. 7 above but 75mm dia & ditto
Excavation in trenches in n.exc 1.5m wide and n exc 1.5 in depth for foundation etc or for shaffs walls, manholes pier holes etc n exc 10 Sqm on plan and n exc 1.5m depth and getting out in hard/dense soil as specified
S&F for 200mm bore RCC pipe class NP-2 laid and jointed complete with collers including testing all as specified and directed by Engineer-in-Charge.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including forming cradle after they are laid and tested for 200mm bore RCC pipe complete all as specified and as directed by Engineer-in-Charge.
Returning filling in including spreading leveling watering and well ramming in layers not exc 25 with soil
Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed by EIC.
M&L for Cutting into existing manholes for connecting new drains of internal dia 200mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, complete all as specified.
Taking down Cast iron pipe of dia upto 100mm fixed on wall or in floor including all fittings upto 7th floor of bldg. complete all as specified.
S&F 100 mm dia sand cast CI soil waste & vent pipe in any length with ears and jointed with neat cement paste fixed to wall upto 7th floor of bldg., complete all as specified.
S&F 75 mm dia sand cast CI soil waste & vent pipe in any length with ears and jointed with neat cement paste fixed to wall upto 7th floor of bldg., complete all as specified.
Taking down Cast iron pipe of dia 100mm fixed on walls and re-fixed on wall including all fittings after cleaning properly and paint with bitumenious paint upto 7th floor of building complete all as specified.
Taking down Cast iron pipe of dia 75mm fixed on walls and re-fixed on wall including all fittings after cleaning properly and paint with bitumenious paint upto 7th floor of building complete all as specified.
S&F in repair 100 mm dia sand cast CI bend of any radius with ovel access door and jointed with neat cement paste.
Ditto- as per item 20 above but in 75mm dia .
S&F in repair 100 mm dia branch piece single length branch of any radius with ovel access door and jointed with neat cement paste.
All as per Ser item No 22 but double branch & ditto.
S&F in repair 75 mm dia branch piece single branch of any radius with ovel access door and jointed with neat cement paste.
All as per Ser item No 24 but double branch & ditto.
S & F as in repairs Cast iron floor trap 100 mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2;4) all as specified
S&F in repairs Cast iron work grade FG 150, machined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles machined each exceeding 5 Kg by weight complete all as specified and directed by EIC
S&F as in repairs 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 7th floor of bldg., complete all as specified.
S&F as in repairs PVC (SWR) bends of 160 mm bore & ht. upto 7th floor of bldg., complete all as specified.
S&F as in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 7th floor of bldg., complete all as specified.
S&F as in repairs PVC (SWR) bends of 110 mm bore & ht. upto 7th floor of bldg., complete all as specified.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.
Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling ad mass concrete, complete all as specified.
Material and labour for brick work with sub class "B" bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified.
M&L old size Brick Work with sub class 'B' bricks, straight or curved on plan to any radias in half brick thick walls, built in cement moter 1:4 complete all as specified.
M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in benching, bed plates, coping and the like including from work and finsihing all exposed surface of concrete.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including forms mould, mi-tred/ stopped ends etc.
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .
S&F as in repairs factory made RCC cover slab of size 300mm x 600mm size and 100mm thick and including reinforement 12 dia @ 100 C/C bothways and placing over at directed locations, complete all as specified and directed by Engineer-in-charge.
Material & labour for cleaning the existing drainage/culvert including removing cover slab carefully without damaging and clean soils,spoils,vegetation,silt etc and relaying cover slabs and removing waste materials outside MD Land complete all as directed by Engineer-in-Charge.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, upto 7th floor of bldg.,complete all as specified.
Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair, complete all as specified.
M&L 100 mm thick cement concrete type B-1 , 1:2:4 (20 mm graded stone agg) as in hardstanding laid in alternate panel all as specified.
M&L for cement concrete interlocking paver tiles 60 mm thick, M-35 grade having glossy finish (colour and pattern approved by GE) (tested as per IS 1237-1980) laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator & dismantling of old tiles, complete all as directed.
Dismantling of old interlocking tiles carefully and Refixing in same location interlocking paver tiles of any thickness and M&L for 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compation, complete all as specified and directed.
M&L for cleaning of PCC paver block, chequred tiles and any type of PCC flooring by water sprey and apply one coat of acrylic emulsion paint suitable for floor by using brush, complete all as specified.
M&L for glazed Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement & pigments, set, jointed and pointed in neat cement slurry in floors over screed bed or bedding layer of mortar in CM (1:6) 20mm thick for laying tiles and including dismantling of old tiles, complete all as specified.
M&L for stone walling of squared rubble brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified.
M&L for stone walling of squared rubble brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 but except stone all as specified.
M&L for raking out joints/ pointing of random rubble or polygonal rubble uncoursed or brought up to courses masonry built in cement mortor complete all as specified & directed.
M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course masonry in CM 1:3 , complete all as specified & directed.
Preparation of old plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over ), complete all as specified. Note : Work carried out upto 7th floor of building.
Preparation of new steel surfaces & apply two coats of synthetic enamel paint over a coat of red oxide, complete all as specified.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified.
S & F posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-290 Gde E-165 ® including embeding in concrete
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.
Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.
S&F in repairs barbed razor type concertina coil,9SWG hot galvanized spring tensile wire of UTS 145 to 150 N/Sqm,zinc coating 250 to300 gms/sqm, dia of coil when un-streched shall be 610 mm having minimum of coil (GI strip) 1.625 Kg/Rm, hot dip galvanised razar ribben tape of size 0.50 mm thickness,19mm wide before wraping on central core wire fixed with 1.66 mm thick GI clips (minimum 25 Nos/RM) and special nut and bolts to hold two coils together and having 50 circles and covering 6 running meter length complete all as specified and as directed.
S&F as in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Unitech Enterprises
I.J Enterprises
Shivam Enterprises
SN CONSTRUCTION
PRABHU ASSOCIATES
SAHU AND SAHU CO.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .