Construction of PD Shop at Melaiyur in Poombuhar Panchayat in Sirkali Block MLACDS 2025-2026

Construction of PD Shop at Melaiyur in Poombuhar Panchayat in Sirkali Block MLACDS 2025-2026

Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification

Supplying and filling in basement with filling River sand in layer of not more than 15 cm thick well rammed etc., complete.

Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate) using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specfication

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Brick work in cm 1:5 mix(one cement and five sand )using country bricks ground maded of size 23 x 11 x 7 cm including curing,finishing and cost & Conveyance of all materials etc., complete.

Brick work in cm 1:5 mix(one cement and five sand )using country bricks ground maded of size 23 x 11 x 7 cm including curing,finishing and cost & Conveyance of all materials etc., complete.

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm x 60cm x and B.G 10 stiffened with M.S angles of size 25mm x 25mm x '3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm x 60cm x and B.G 10 stiffened with M.S angles of size 25mm x 25mm x '3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

Plastering with cm 1:3 mix( one cement and three sand ) to 10 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.

Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.

Painting the plastered wall surfaces with two coats oil bound distemper (inside the building) of approved quality and colour over one coat of wall primer including clearing surface in all floors etc complete with standard specification

Painting the plastered wall surface with two coats of Plastic Emulsion Paint of approved colour including preparation of surface and finishing of outside the building over one coat of cement primer including clearing the surface in all floors etc., complete as per standard specification.

Fooring with Granolithic flooring to 20mm thick using cement Motor 1:2:4 including cost and conveyance of all materials to worksite and all labour charges etc., complete

Cement concrete 1:2:4 mix using 20mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete.

Painting two coats with ready mix paint of approved colour and trade for doors & windows including cost and conveyance of all materials and all other labour charges etc., complete.

Painting two coats with ready mix Block board paint of block colour and trade for Block board including cost and conveyance of all materials and all other labour charges etc., complete.

Providing of pressed tiles of size 20x20x2 cm Laying CM1:3 morter mix and over C.M 1:3 mix pointing including cost and conveyance of all materials to work site and all labour charges for watering, curing etc., complete.

Rolling shutter RS size 2.10mx2.10m

Rolling shutter RS size 1.80mx2.10m

Door of size 1.00mx1.80m

Door of size 0.90 mx1.80m

window w of size 1.00 mx 2.10 m

Venitlator of size 0.90mx0.60m

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Supply and fixing of CF lamp fitting including angle holder.SD 83

Supplying and fixing 1200 mm (48") AC ceiling fan with stepped regulator 300W regulator with 1m down rod on the existing clamp. SD No. 110.

Wiring with 2x1.5 sq mm (22/0/3) PVC insulated Sc. Unsheathed cu. Conductor cable of 1100 V. Grade in Suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113 mm T.W. switch box for 5 A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wire connetion of 14 SWG TC wire for PVC plug point. SD No. 36

Supply and fixing of WT Bulk head fitting with guard (Philips/Bajaj/Crompton/K,lite) suitable for incandescent lamp with 60 W bulb. SD No. 83

Supply and fixing of single box type copact flourescent tube fitting with coper choke and condenser with TW round block on wall or celing with flourescent tube with PVC unsheathed copper leads from terminals to the fitting or Tube light ( SD 88 )

Supply and fixing of TNEB meter Board suitable for 32 A single phase service connection with 32 A fuse (500 V) 32 A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375 mm x 300 mm x 40mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire EB meter to fuse unit. (SD No 125)

Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unshenthed Cu.Couductor of 1100 V grade in 25mm dia Gt pipe (Glass 'B') bent at both ends with necessary angle iron up right and end supports for mains (S.D. No.64) Service pipe

Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unshenthed Cu.Couductor of 1100 V grade on 7/20 GI bearer wire for service connection main (From building to service pipe) (SD No.63)

Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unshenthed Cu.Couductor of 1100 V grade on 7/20 GI bearer wire for service connection main (From electric Post to service pipe) (SD No.64)

Provision for name board charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}